Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Fri Jan 19, 2018 5:04 am

All times are UTC+01:00

Post new topic  Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Thu Nov 08, 2012 11:02 pm 

Joined: Tue Apr 24, 2012 2:12 pm
Posts: 8
Wondered if anyone owned a set of these and what they thought? Not that common in the UK but found them for under a £1k on a european site so seem a good option for a quality, good value and light aero carbon clincher. Main concerns with these are warranty and servicing in the UK (especially if you buy online outside the UK). Any info / personal experiences would be appreciated. Any pics of them on a bike?

Also considering Enve carbon clinchers (not cheap) or Dura-ace C35 clinchers (more affordable but somehow less exciting), if you have any thoughts.



PostPosted: Fri Nov 09, 2012 8:27 am 
User avatar

Joined: Mon Jun 02, 2003 8:17 am
Posts: 6560
Location: Drenthe, Holland
Moved to the road forum.

{USERNAME} wrote:
'Tape was made to wrap your GF's gifts, NOT hold a freakin tire on.'

Posted: Fri Nov 09, 2012 8:27 am 

PostPosted: Fri Nov 09, 2012 9:02 am 

Joined: Wed Jul 08, 2009 9:19 pm
Posts: 576
Never owned a set.

Worked on tons of DT hubs- By far one of the easiest hubs to work on. Pretty much tool free maintenance.

Spokes- Straight pull spokes, although usually only found in pre built wheels are stronger then jbend.

Rims- Seems hard to mess up a rim these days. It is internally drilled though, which would make truing a pain.

Overall, seems like an awesome wheel though I personally would prefer external nipples.

PostPosted: Fri Nov 09, 2012 3:29 pm 

Joined: Sun Jan 09, 2005 5:14 pm
Posts: 465
Location: Sunny So Cal
As far as I know those rims are made by Reynolds and they are pretty bombproof.

PostPosted: Fri Nov 09, 2012 5:18 pm 

Joined: Tue Dec 23, 2008 2:57 pm
Posts: 875
Location: NYC
The 2011 and newer wheels (RRC 46, equivalent to Reynolds Forty Six) are indeed bombproof as Reynolds (the manufacturer for DT Swiss branded rims) greatly improved on the earlier DV46 model, by changing the resin and carbon layup on brake track, yielding a wheel with increased resistance to heat build up and deformation/delamination, which was reported as common failure on earlier DV46. The newer rims are recognizable by the so-called "swirl lip" on the rim near the spoke holes.

Even if a good deal I would be leary of pre-2011 rims.



PostPosted: Mon Nov 26, 2012 10:44 am 

Joined: Mon Nov 26, 2012 10:16 am
Posts: 1
Nice post. I like it. Thanks for sharing these information. Keep it up. :beerchug:

Prep4sure.com Lean-Six-Sigma Black Belt Courses

PostPosted: Thu Jan 03, 2013 1:09 pm 

Joined: Tue Apr 24, 2012 2:12 pm
Posts: 8
Thanks for your comments, I picked up the wheels for under £900 and am very pleased. They are stiff, super smooth and weighed exactly as claimed (1523g ex rim tape) - Look great on my CDE Dogma2 too (pic attached!). Only thing to note is that I ran swiss stop yellow pads initially but they left some yellow residue on the carbon braking surface, so I switched to the swiss stop for lightweight (same pads apparently but black). After a bit of squealing while bedding in these now seem to work really well with the DA calipers.

small-bike.jpg [ 49.78 KiB | Viewed 9016 times ]
PostPosted: Thu Jan 03, 2013 3:00 pm 

Joined: Mon Aug 20, 2012 12:12 pm
Posts: 656
Location: Oop North
Do they have the ctg braking surface like the Reynolds? I have Attacks and use the Reynolds specified pads and have no problem with noise/residue/power etc.

PostPosted: Tue Jul 22, 2014 8:38 pm 

Joined: Tue Jul 22, 2014 8:13 pm
Posts: 1
I owned a pair of DT Swiss RC 38 Spline carbon clinchers, my first set of carbon rims, and I thought they were excellent. I immediately noticed the difference in speed and responsiveness when I put them on and it was even more apparent when I put my old wheels back on again after a few months. But the reason I had to put my old wheels back again was because the carbon rims deformed during a cyclo while on a descent (first the front and then rear a few minutes later). On returning the rims to my bike store who in turn returned them to DT Swiss, I was told that the warranty does not cover cases whereby excessive braking is the cause of the failure. I'm fairly experienced as a cyclist and a reasonable descender so I know how to brake properly while descending (in fact I try not to brake much at all if possible!). To my mind I made use of the brakes no differently than I've done thousands of times before. Not only that but the tire pressure was not too high (something like 7.5 Bar/110 Psi - the max is 9 Bar as stated on the rim itself) and the temperatures that day were relatively mild (it was only 9 am in the morning anyway). So for me the rims where not under particularly extreme conditions. My conclusion was therefore that it was a manufacturer issue. Not so apparently.

My warning is therefore that while the wheels themselves are great, the warranty on the DT Swiss rims does not appear to be up to much. I was told by my bike store that with other manufacturers they've always been able to get issues such as these solved without any trouble or cost. They are considering not stocking the DT Swiss rims (at least the carbon clincher version) because they don't want to be in a position where they have to absorb repair costs themselves or pass on this cost to disgruntled customers.

Posted: Tue Jul 22, 2014 8:38 pm 

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 9 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. DT Swiss QR endcaps

in Road




Sat Oct 14, 2017 1:31 am

stormur View the latest post

There are no new unread posts for this topic. Dt Swiss rc55 spline

in Road




Tue Nov 21, 2017 11:44 am

stormur View the latest post

There are no new unread posts for this topic. Swiss Stop Flash Evo BXP thickness

in Road

Steve K



Mon Mar 13, 2017 8:50 pm

FIJIGabe View the latest post

There are no new unread posts for this topic. Shamal Mille C17 vs DT-Swiss PR1400 Oxic

in Road




Sun Apr 23, 2017 11:11 pm

snowdevlin View the latest post

There are no new unread posts for this topic. dt swiss 190s freehub bearings (on lightweight wheel)

in Road




Fri May 26, 2017 7:01 am

sungod View the latest post

All times are UTC+01:00

Who is online

Users browsing this forum: Bing [Bot], donald, Google [Bot], Hapsmo911, KarlC and 34 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited