Show off you WW 29r builds!
Moderators: MrCurrieinahurry, maxim809, Moderator Team
Ok, I'll show mine off even though it really isn't a WW ride by any means. It could be with a different frame but I like my mass produced STEEL Vassago...for now...
Jabber frame
White Brothers Rock Solid fork
King HS
Ritchey WCS stem w/ ti bolts
Ritchey WCS 1/4" rise bar
ESI chunky grips (tend to swap grips frequently for whatever reason)
Hylix barends or Ergon set up depending on what I feel like riding from week to week
KCNC 400mm post
XTR M960 crank modded for SS and ceramic coated in matte black
HBC 32t ring
KCNC bolts
KMC X9sl chain
Selle San Marco Aspide saddle w/ ti rails
XTR M985 brakes
Stock Vassago seat clamp (also have a bmx S&M in red that I swap out if I feel the need for bling)
Egg Beater 3's w/ ti axle swap
XT BB (blew out my XTR and went cheap for the winter but will probably throw a King on it this summer)
Wheels (have two sets)
Set 1
Velocity VXC rims
DT Comp spokes
Silver brass nips
White Industries hubs (32 hole)
White Industries Trials FW (18t)
WTB Bronson 2.2 tires (tubeless)
Set 2
Crest rims
Sapim Spokes
allow nipples
Hope hubs (swapped out stock rear ss bolts for ti ones from Toronto bikes and shaved some 30g! They stock bolts are M10's!!!)
Surly 17t cog (King 18t is in the mail)
Maxxis Ikon tires (tubeless)
Jabber frame
White Brothers Rock Solid fork
King HS
Ritchey WCS stem w/ ti bolts
Ritchey WCS 1/4" rise bar
ESI chunky grips (tend to swap grips frequently for whatever reason)
Hylix barends or Ergon set up depending on what I feel like riding from week to week
KCNC 400mm post
XTR M960 crank modded for SS and ceramic coated in matte black
HBC 32t ring
KCNC bolts
KMC X9sl chain
Selle San Marco Aspide saddle w/ ti rails
XTR M985 brakes
Stock Vassago seat clamp (also have a bmx S&M in red that I swap out if I feel the need for bling)
Egg Beater 3's w/ ti axle swap
XT BB (blew out my XTR and went cheap for the winter but will probably throw a King on it this summer)
Wheels (have two sets)
Set 1
Velocity VXC rims
DT Comp spokes
Silver brass nips
White Industries hubs (32 hole)
White Industries Trials FW (18t)
WTB Bronson 2.2 tires (tubeless)
Set 2
Crest rims
Sapim Spokes
allow nipples
Hope hubs (swapped out stock rear ss bolts for ti ones from Toronto bikes and shaved some 30g! They stock bolts are M10's!!!)
Surly 17t cog (King 18t is in the mail)
Maxxis Ikon tires (tubeless)
Cannondale Synapse (alu)...it works
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 76
- Joined: Thu Jan 05, 2012 1:26 am
My signature has my niner build as well
My Bike:
viewtopic.php?f=10&t=110318" onclick="window.open(this.href);return false;
viewtopic.php?f=10&t=110318" onclick="window.open(this.href);return false;
Here's mine: 20.5 lbs with (albeit empty) bottles included.
Form Prevail Custom Frame (23.75" TT)
Form 30.9mm layback seatpost
Lefty 90mm XLR
MCFK steerer and 680mm bars
Moots RSL stem (brushed to match frame, but has since been replaced with KCNC arrow)
Ritchey bar ends
Selle Italia Kit Carbonio flow saddle
Enve XC UST rims
Kappius Components hubs
DT Aerolite spokes (2x)
Schwalbe 29x2.25 Racing Ralphs + stans
Hollowgram SL cranks with Carbon-ti rings, Enduro ceramic PF30 BB
Sram XX cassette, RD, FD, trigger shifters
KMC chain
Nokon ultralite shifter housing
Magura MT8 brakes and Storm SL rotors (180mm front, 160mm rear), KCNC adaptor
Crank Bros 3Ti pedals with Ward Industries spindles
Andrews King Cage Ti
Form Prevail Custom Frame (23.75" TT)
Form 30.9mm layback seatpost
Lefty 90mm XLR
MCFK steerer and 680mm bars
Moots RSL stem (brushed to match frame, but has since been replaced with KCNC arrow)
Ritchey bar ends
Selle Italia Kit Carbonio flow saddle
Enve XC UST rims
Kappius Components hubs
DT Aerolite spokes (2x)
Schwalbe 29x2.25 Racing Ralphs + stans
Hollowgram SL cranks with Carbon-ti rings, Enduro ceramic PF30 BB
Sram XX cassette, RD, FD, trigger shifters
KMC chain
Nokon ultralite shifter housing
Magura MT8 brakes and Storm SL rotors (180mm front, 160mm rear), KCNC adaptor
Crank Bros 3Ti pedals with Ward Industries spindles
Andrews King Cage Ti
Chinese Carbon 16" 29er Frame
Rock Shox SID RCT3 29er Fork
ENVE XC UST rims w/Sapim CX-Rays and DT 240s (9/10mm TB, CL)
Ritchey WCS C260 -25* x 80mm stem
700mm ENVE flat bar
KCNC Pro Lite Ti
Rocket Ron 2.25, Specialized Renegade 1.95 (a bit over 2.0", though)
XX RD, Cassette, Rear Shifter
XO FD, Crank, Front Shifter
XX brakes and CL rotors
Currently 20.1 lbs. Going 1x10 with a XX1 crank when I get back from AFG. That, and some other mods might drop it below 19lbs.
Rock Shox SID RCT3 29er Fork
ENVE XC UST rims w/Sapim CX-Rays and DT 240s (9/10mm TB, CL)
Ritchey WCS C260 -25* x 80mm stem
700mm ENVE flat bar
KCNC Pro Lite Ti
Rocket Ron 2.25, Specialized Renegade 1.95 (a bit over 2.0", though)
XX RD, Cassette, Rear Shifter
XO FD, Crank, Front Shifter
XX brakes and CL rotors
Currently 20.1 lbs. Going 1x10 with a XX1 crank when I get back from AFG. That, and some other mods might drop it below 19lbs.
-
- Posts: 267
- Joined: Mon May 08, 2006 4:42 am
Here's my 29er assortment. Newest addition came a week ago via Cannondale. Ultimate Scalpel weighed in at 19lbs 14ozs fully loaded. It's the sh$t.
Other three;
Primus Mootry steel race bike, enve carbon wheels, 10 speed sram grip shifters, enve bars and lefty fork, hollowgram cranks.
Firefly titanium 29er lefty fork, sram 10 speed, hollowgram cranks and enve UST tubeless wheels plus lefty carbon XLR fork.
Blacksheep Highlight ST full suspension running single speed, lefty fork, enve cockpit, formula r1 brakes, and stan's crest wheels with Project321 hubs.
All are effin the sh$t to ride.
JB
Other three;
Primus Mootry steel race bike, enve carbon wheels, 10 speed sram grip shifters, enve bars and lefty fork, hollowgram cranks.
Firefly titanium 29er lefty fork, sram 10 speed, hollowgram cranks and enve UST tubeless wheels plus lefty carbon XLR fork.
Blacksheep Highlight ST full suspension running single speed, lefty fork, enve cockpit, formula r1 brakes, and stan's crest wheels with Project321 hubs.
All are effin the sh$t to ride.
JB
Form Cycles are in Phoenix Arizona. Not sure what to say about the hubs, except that they're without doubt my favorite thing on the bike.
@JB: we need to see better photos of your Firefly/BlackSheep/PrimusMootry!
Edit: Added some pictures of the hubs/wheels
@JB: we need to see better photos of your Firefly/BlackSheep/PrimusMootry!
Edit: Added some pictures of the hubs/wheels
Last edited by dwaharvey on Sat Jan 12, 2013 5:45 pm, edited 1 time in total.
jbbikerider wrote:Here's my 29er assortment. Newest addition came a week ago via Cannondale. Ultimate Scalpel weighed in at 19lbs 14ozs fully loaded. It's the sh$t.
Other three;
Primus Mootry steel race bike, enve carbon wheels, 10 speed sram grip shifters, enve bars and lefty fork, hollowgram cranks.
Firefly titanium 29er lefty fork, sram 10 speed, hollowgram cranks and enve UST tubeless wheels plus lefty carbon XLR fork.
Blacksheep Highlight ST full suspension running single speed, lefty fork, enve cockpit, formula r1 brakes, and stan's crest wheels with Project321 hubs.
All are effin the sh$t to ride.
JB
Amazing Scalpel, JB
Could you please detail the components?
Thx
-
- Posts: 267
- Joined: Mon May 08, 2006 4:42 am
Patrul wrote:jbbikerider wrote:Here's my 29er assortment. Newest addition came a week ago via Cannondale. Ultimate Scalpel weighed in at 19lbs 14ozs fully loaded. It's the sh$t.
Other three;
Primus Mootry steel race bike, enve carbon wheels, 10 speed sram grip shifters, enve bars and lefty fork, hollowgram cranks.
Firefly titanium 29er lefty fork, sram 10 speed, hollowgram cranks and enve UST tubeless wheels plus lefty carbon XLR fork.
Blacksheep Highlight ST full suspension running single speed, lefty fork, enve cockpit, formula r1 brakes, and stan's crest wheels with Project321 hubs.
All are effin the sh$t to ride.
JB
Amazing Scalpel, JB
Could you please detail the components?
Thx
It's kinda of a mut. Full 2013 XTR, XX rings, Enve bars and wheels for a song. It pays to deal with real Cdale dealers. Spokes are white same hubs as 2013, newest fork a 2012 RP23 shock(bought a new shock and on it's way to Push Industries for custom work). I would rather have a Push anything than whatever from Fox. Bike kicks AS$.
-
- Posts: 267
- Joined: Mon May 08, 2006 4:42 am
dhphat wrote:A lefty on a beautiful Firefly say it aint so!
Too each his own. I chose parts for my bikes based on performance based over a boat load of miles.
Thanks for looking!
dhphat wrote:A lefty on a beautiful Firefly say it aint so!
I was going to say the same thing about the Black Sheep! Such beautiful lines until you see the front end.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com