Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Tue May 31, 2016 3:28 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Sat Dec 22, 2012 2:54 pm 
Offline

Joined: Thu Mar 29, 2012 3:38 pm
Posts: 46
Location: Albuquerque, NM, USA
I've been primarily a road cyclist ... but I live in an excellent location for mountain biking also, and I want to get started.

My questions are regarding fit. Will my road bike measurements translate directly to a mountain bike? I assume saddle height and setback from BB should be nearly identical? Reach and stack is where I'm really not sure. Since MTB handlebars don't have the "reach" of road handlebars, is there a way that people swag this measurement? It seems like you could measure from nose of saddle to "hoods" on your roadbike ... and come up with a close distance for flat mountain bike bars.

Also, is there any reason I can't use my favorite road bike saddle on a mountain bike? I run a Selle Italia SLR Superflow 145. The only downside is I might get a mud splash right on the center of my rear, in the cut-out? :oops:

Scott


Top
   
PostPosted: Sat Dec 22, 2012 4:44 pm 
Offline
User avatar

Joined: Mon Jan 26, 2004 7:48 pm
Posts: 127
The main difference is that MTB frame toptubes are about 50-70mm longer, whereas on a road bike, the drop bars add additional reach to the toptube and stem. MTB riders tend to run a shorter stem and more upright postion too for better control at lower speeds and the need to get low'n'aero is less important. Choice of saddle is down to rider preference, but MTB saddles tend to take more of a beating - particularly on a hardtail, as well as coping with the occassional 'off'

_________________
Just ride


Top
   
PostPosted: Sat Dec 22, 2012 8:02 pm 
Offline
User avatar

Joined: Thu Mar 17, 2005 3:25 am
Posts: 2206
Location: Southern Indiana USA
For me, the relationship between my seat and the center of the bottom bracket is exactly the same. On road bikes, I am very flexible and generally run 110 stem with zero slope and no spacers or one very small one. On comparable size MTB, I generally run 80-100 stem with around 15 mm spacers under and a stem with slight upward slope. Also, the seats that I like on road bikes, I hate on MTB. Most MTB seats have flatter fatter rear section since you sit more back on your sit bones.

_________________
For certain parts stiffer is more important than lighter.


Top
   
PostPosted: Mon Dec 24, 2012 4:09 am 
Offline

Joined: Fri Apr 13, 2007 4:53 pm
Posts: 155
My overall reach on my XC Race bike is 40mm shorter than my road bike. Which is fairly typical to what I have seen with others. Mountain bike fit in a more rec or all mountain style is much shorter and more up right and a lot to personal choice. I don't seem may Pro XC bike with high front higher than the seat.


Top
   
PostPosted: Mon Dec 24, 2012 3:13 pm 
Offline
User avatar

Joined: Thu Mar 17, 2005 3:25 am
Posts: 2206
Location: Southern Indiana USA
Oh yea, the other part of fit-drop. My road bikes the bars are way below the seat (I am very limber) and on my MTB the bars are almost up to seat level, just slightly below. You are just going to have to buy a mountain bike, set the BB to seat distance from your road bike and experiment with all the other perameters including the front-rear orientation of the seat with respect to the BB. The distance BB to seat will be the one constant.

_________________
For certain parts stiffer is more important than lighter.


Top
   
PostPosted: Mon Dec 24, 2012 4:57 pm 
Offline

Joined: Sat Feb 06, 2010 2:55 am
Posts: 81
Location: USA
I run a pretty similar position as my road bike. I use a 110mm -17 degree stem sitting on the top cap. For my it feels soo much better to be stretched out and having my handlebars a bit lower. I can't stand a short stem/wide bars combo


Top
   
PostPosted: Mon Dec 24, 2012 11:57 pm 
Offline

Joined: Thu Mar 29, 2012 3:38 pm
Posts: 46
Location: Albuquerque, NM, USA
Thank you for the feedback, everyone. Good to know saddle height and setback are similar. I'll have to play around with stack and reach.

Scott


Top
   
PostPosted: Tue Dec 25, 2012 4:45 pm 
Offline

Joined: Sat Dec 13, 2003 2:25 am
Posts: 4713
Location: Canada
I am in a similar road/MTB community. I run exactly the same position as my road/'cross bikes (in fact, I am running drop bars on my MTB, too).


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. 2013 TCR SL4 any good as a 'fitting test bike' ...?

in Training

diegogarcia

2

254

Wed Apr 13, 2016 10:22 am

Juanmoretime View the latest post

There are no new unread posts for this topic. Hydraulic Intro for a Roadie

[ Go to page: 1 2 ]

in Road

dvincere

22

1993

Mon Jul 06, 2015 5:02 pm

spytech View the latest post

There are no new unread posts for this topic. Fitting di2 to an old frame

[ Go to page: 1 2 ]

in Road

smoby

16

835

Sun Feb 07, 2016 9:37 pm

Danza View the latest post

There are no new unread posts for this topic. Bont zero+ wide fitting

in Cycle Chat

conti

3

413

Sat Jul 25, 2015 5:24 pm

conti View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited