Bummer, I was wrong , they want 50 with the 15% discount, guys, how about something that's moldable like let say soles? Definitely would like flexibility, in case both arches are different.


Sent from my iPad using Tapatalk HD

I tried the SOLES, and they are high quality construction, but the arch was simply not high enough for me.
I have tried two forms of heat moldable: SOLES and Shimano, But the molding feature just didn't really seem to create a practical benefit.
Superfeet are also pretty good. As mentioned before, ignore the size and try them untiol you find the best fit. Then you can cut them to fit in the shoe. I ended up going up a size so that the arch was higher and more forward than on my numerical size. But the arch was still just not high enough.
Obviously, fitting things like this becomes very personalized and whatever you can make work for you is the way to go. Fortunately, the Specialized Green feels like it was made specifically for my feet.

As a fitter who has trialed over 40 footbed systems and met with countless poorly performing orthotics my recommendations are fist esoles dynamic with black arch kit, this is the highest, but doesn't always come in the kit. Second would be esoles powerbed in the high version, not so tuneable but the arch is shorter and less likely to interfere.

You are correct to try to solve the foot issue first and appropriate arch support is definitely the priority. Then wedging, and its unlikely that the specialized in the shoe wedges will be the optimum solution but a fine place to start. After wedges look at dealing with leg length shims.
Before you get into any of that make sure your saddle is not too high, this always creates greater asymmetry and its possible that that could be the root cause. Although arch support is well worth figuring out anyway.
If you have not found it already steve Hoggs blog is the current go to for self analysis bike fitting.
Oh and if your not afraid of the DIY then feel free to make your own foot beds, they really only need to be the correct shape and can be made from almost anything. The idea is to elicit constant proprioception, and this not so much about support, but more about having something touching your foot in the exact position that it ends up holding under sustained load. So ultimately if you don't feel the footbed whilst pedaling its not doing its job. This also means that whilst standing it should feel mildly invasive in the rear portion of the arch.
Again it's not easy to get right for either you or any other professional. I only know of four fitters in the whole world who can dial in footbeds consistently! So although it will take time your best bet is one of self discovery. So get on the Hogg blogg and start self analysing!

For high archs, esoles are the best solution... G8s and specialised green aren't as high or supportive...

If u have quite a collapsible arch, and need quite a corrective insole, then u might find the off the shelf type not helpful. The esoles, albeit providing the highest arch correction against the others, don't provide rigid support. U will find if u collapse your arch under load, then the esoles will collapse to a fair degree as well ( as do their competitors)

I have high arch narrow feet. I do the same thing as Juanacity pretty much but custom for my foot. I take the insoles from mizuno inspire running shoes (that work for me for running), and then shape the bootm of the insole to fit the inside of the empty sidi ergo 3. To shape it I cut up a flat, thin gel insole from k-mart and tape it to the bottom of the insole. I also have a circular cutout under the ball of my foot (1st mp joint) where I get a hotspot. I think this trial and error until perfect works fine. Getting the last of the shoe that works for you is crucial as well. For example, giros are terrible for me and sidi fantastic.

I have high arches and the best shoes I found for my feet and particular quirks were last seasons Fizik R1. The innersoles are availble as an aftermarket upgrade for other shoes: 'Fizik 3D Flex Cycling Insole'.

The blurb:
Fizik in collaboration with SIDAS Technologies have developed the 3D Flex Custom Cycling Insole. Designed to work with any cycling shoe and heat mouldable, the insole improves comfort and support to increase rider efficiency.