Hi. This is my new everyday bike. I've had some back problems on stiffer bikes, and after trying a Synapse, I asked my LBS for a good deal on a 2012 model. They didn't have anymore available, but they supplied me with a 2013 model, and it was actually about $100 cheaper than the winter sale price they were asking for the 2012 model
I got a 105 model, and took it out for one ride before I stripped it completely. I had som bits lying around, and then I have bought a 2011 RED groupset from Wiggle in the UK. After the 2012 set hit the shops, the price has dropped significantly on the old model. If I were to do it again, I would however gotten the new crankset, because it's the only piece that offers a significant weight reduction. I know the front der is better than the old one, but then I would need the new shifters. And that would be at a much higher price. If the FD is no good I'll use the Shimano 105 with bolt tuning. Should be only 10 grams more than the SRAM
I weren't expecting the frame to be particularly light, but when I put it on the scales (it's a size 51) it was 1205 grams. And that includes BB 30 bottom bracket, RD hanger, cable stops and bb cable guide. So I'm guesstimating the frame to be around 1100grams.
Here's a pic of the bike with a few parts on it:
File comment: 2013 Cannondale Synapse with SRAM red and Fulcrum Zero wheels
IMG_3285 - Kopi (640x427).jpg [ 94.22 KiB | Viewed 4729 times ]
I've seen the weight on Synapse forks stated at around 450 grams, so after I cut mine down to 220 mm, this was a pleasant surprice:
File comment: Weight Synapse fork: 365 grams
IMG_3248 (640x427).jpg [ 34.93 KiB | Viewed 4729 times ]
When It came to the brakes, I had some Red calipers I wanted to use. I need powerful braking, and IMO you will only get that with dual pivot calipers. I changed the brake clamp bolt to aluminium, and put on KCNC pad holders. Here's the front brake:
File comment: Front brake with mounting bolt
IMG_3275 (640x632).jpg [ 37.24 KiB | Viewed 4729 times ]
For the back I'm going to try something different. One of the online shops here in Norway had a sale a while back, and I bought a set of Brams M5 brakes. A lot of people praise these brakes, and the marketing claims them to be some of the most powerful brakes in the world (or something like that) IMO they are the worst piece of bike shit I have ever owned. Going down steep hairpin bends with these, It's impossible to get anything near normal braking power. I have tried adjusting the distance between rim and pads, but for no good. Althoug locking ones wheels is not something you would wish for, I would like to know that my brakes can actually DO IT, because that means I have brakes that will give me enough power in any situation. All the brakes I have tried from top of the line Shimi and SRAM, via moutain bike hydraulics, to the cheapest cantilevers, can do this easily. The M5's have no chance in hell. When I tried to pull really hard on the levers, I managed to pull the brake cable out of it's fastener. And yes, It was securely tightened.
So why would I still use it? Well, I've ridden motorbikes for many years, and I'm used to do most of my braking with the front brake. So maybe the poor performance of the M5 caliper will make it a decent rear brake, just for scrubbing of a little speed or aiding the front brake, when I need to stop quick. So I will try it on, but if it's still shit, there will be a Red caliper at the back too. Anyway, here's the brake complete with pads and mounting bolt:
File comment: Brams M5 brake with Kcnc pad holders
IMG_3274 (640x605).jpg [ 37.15 KiB | Viewed 4729 times ]
Up front I got a new Zipp SS handlebar. Claimed weight 190 grams. On my scale 188. Very good.
For the seatpost I'm thinking about a KCNC sc, as they are quite light and reasonably priced. It will also match the stem. But I weigh 190 lbs and plan to use a Selle Italia SLR with carbon rails, so I want a different cradle to distribute my weight better on the rails. Found a post in here about Lynskey selling a carbon cradle with Ti bolts for $25. A real bargain
But then they wanted $105 for shipping to Norway. WTF
Chain reaction is selling an aluminium cradle for Thomson seatpost:http://www.chainreactioncycles.com/Models.aspx?ModelID=20501
This is for the Elite seatpost, but the cradle itself looks identical to the one used on their Masterpiece post. I guess the weight shouldn't be that bad compared to a carbon one. I have also looked at the Smud carbon cradle, but it doesn't seem to provide that much support area for the rails.
If anyone have any other ideas for seatpost or cradle, please let me know. And if someone can tell me if the Thomson cradle can fit the 27 mm Kcnc seatpost it would be appreciated