Lightweight Rd on Sram

Page 1 of 2

[ 30 posts ]

Go to page 1, 2  Next

Print view Previous topic | Next topic

Author	Message
wshiong	Post subject: Lightweight Rd on Sram Posted: Tue Dec 18, 2012 3:13 am
Joined: Tue Oct 12, 2010 4:00 pm Posts: 439 Location: MY	Is that possible a Lightweight Rd on a Sram red 10 speed shifters. Cant find much info on net. Has anyone done this setup before. According to Lightweight handbook is only for shimano and campy. I assume sram are similar to shimano. Anyone? _________________ Parlee Z3sl - 5 kg Passoni Xxti- 6.2 kg
Top

wpccrunner	Post subject: Re: Lightweight Rd on Sram Posted: Tue Dec 18, 2012 3:19 am
Joined: Fri Dec 07, 2012 8:34 pm Posts: 36 Location: South Florida	without reading any info in this Lightweight RD you speak of, I do know that Sram hss a different cable pull ratio than shimano and campy. as in a SRAM RD does not work with Shimano shifter and vice-a-versa
Top

eric	Post subject: Re: Lightweight Rd on Sram Posted: Tue Dec 18, 2012 7:45 pm
Joined: Tue Nov 11, 2003 9:47 pm Posts: 958 Location: Santa Cruz, California, USA	Sram cable pull is very different from Shimano. You could use a Jtek shiftmate to match the cable pull but it would look inappropriate with a Lightweight derailleur.
Top

dereksmalls	Post subject: Re: Lightweight Rd on Sram Posted: Tue Dec 18, 2012 9:36 pm
Joined: Tue Aug 02, 2011 9:20 pm Posts: 762 Location: New Zealand	One of these? You actually have one of them?
Top

bm0p700f	Post subject: Re: Lightweight Rd on Sram Posted: Tue Dec 18, 2012 10:21 pm
in the industry Joined: Sat May 12, 2012 7:25 pm Posts: 836 Location: Glermsford, Suffolk U.K	That is just porn. I feel corupted and dirty now, thanks guys. How light is it? _________________ www.thecycleclinic.co.uk
Top

wshiong	Post subject: Re: Lightweight Rd on Sram Posted: Wed Dec 19, 2012 2:58 am
Joined: Tue Oct 12, 2010 4:00 pm Posts: 439 Location: MY	dereksmalls wrote: One of these? You actually have one of them? Yes i have it running on campy for few years. Now planing to go sram, just would like to ask before i took out from the bike. If cant fit i wont do it and have to reinstall back to campy again. _________________ Parlee Z3sl - 5 kg Passoni Xxti- 6.2 kg
Top

prendrefeu	Post subject: Re: Lightweight Rd on Sram Posted: Wed Dec 19, 2012 3:13 am
Joined: Wed Oct 31, 2007 10:32 pm Posts: 6611 Location: Los Angeles	A tuned SRAM RD is lighter and more affordable. _________________ Exp001
Top

Wingnut	Post subject: Lightweight Rd on Sram Posted: Wed Dec 19, 2012 3:48 am
Joined: Sat Jun 23, 2007 12:41 am Posts: 1056	But the Lightweight derailleur has triple the coolness... _________________ "It never gets easier, you just go faster..." - Greg Lemond "Because technology alone is a poor substitute for experience." - Richard Sachs
Top

prendrefeu	Post subject: Lightweight Rd on Sram Posted: Wed Dec 19, 2012 4:12 am
Joined: Wed Oct 31, 2007 10:32 pm Posts: 6611 Location: Los Angeles	True, true. Maybe OP can tune it. _________________ Exp001
Top

wshiong	Post subject: Re: Lightweight Rd on Sram Posted: Wed Dec 19, 2012 4:19 am
Joined: Tue Oct 12, 2010 4:00 pm Posts: 439 Location: MY	prendrefeu wrote: A tuned SRAM RD is lighter and more affordable. Been running on sram rd with fiberlyte pulley and cage now. _________________ Parlee Z3sl - 5 kg Passoni Xxti- 6.2 kg
Top

wshiong	Post subject: Re: Lightweight Rd on Sram Posted: Wed Dec 19, 2012 4:22 am
Joined: Tue Oct 12, 2010 4:00 pm Posts: 439 Location: MY	prendrefeu wrote: True, true. Maybe OP can tune it. Maybe i will just try to fix it with standard shifters and see how it works. If really not fit will change back to sram. _________________ Parlee Z3sl - 5 kg Passoni Xxti- 6.2 kg
Top

NGMN	Post subject: Re: Lightweight Rd on Sram Posted: Wed Dec 19, 2012 4:28 am
Joined: Mon May 30, 2005 7:13 am Posts: 1456	I think the actual pull ratios for the various derailleurs are something like: SHimano 1.7:1 Campy 1.4:1 Sram 1.3:1
Top

lechat	Post subject: Re: Lightweight Rd on Sram Posted: Wed Dec 19, 2012 4:52 am
Joined: Thu Sep 30, 2010 3:32 pm Posts: 218 Location: S.E. TN	prendrefeu wrote: True, true. Maybe OP can tune it. I'm a terror with a dremel, but I'd need at least 4 fingers before cutting into that thing. To steady my hand if nothing else.
Top

dereksmalls	Post subject: Re: Lightweight Rd on Sram Posted: Wed Dec 19, 2012 6:10 am
Joined: Tue Aug 02, 2011 9:20 pm Posts: 762 Location: New Zealand	wshiong - is your bike with the LW derailleurs in the gallery section? I'd love to see them!
Top

wshiong	Post subject: Re: Lightweight Rd on Sram Posted: Wed Dec 19, 2012 8:02 am
Joined: Tue Oct 12, 2010 4:00 pm Posts: 439 Location: MY	dereksmalls wrote: wshiong - is your bike with the LW derailleurs in the gallery section? I'd love to see them! yea on a parlee. _________________ Parlee Z3sl - 5 kg Passoni Xxti- 6.2 kg
Top

Display posts from previous: All posts1 day7 days2 weeks1 month3 months6 months1 year Sort by AuthorPost timeSubject AscendingDescending

Page 1 of 2

[ 30 posts ]

Go to page 1, 2  Next