Project AsiaCarbon with ISP (FM015-ISP) Pics pg. 2
Moderators: MrCurrieinahurry, maxim809, Moderator Team
So i was originally going to build my first WW bike based on a Pro-Lite Cuneo with a 3T Funda Pro fork, but then i found a too good offer on a unbranded tapered carbon frame in 3k weave with integrated seatpost. I have always desired a frame with ISP, but avoided it because of the troubles when it comes to traveling(flying). But lucky me, if i remove the cranks it fits right in the bike suitcase, HURRA!
I'm hoping to reach a bit under the UCI weight limit at 6,8kg, but we'll see.
Now on to the build.
Build list
Frame sz. 52 - 1174g (including headset!)
Tapered fork (still needs to be cut about 2cm, to get all slammed) - 381g
Sram Red cranks 172,5 (with black Sram Force chainrings) - 475g w/o chainrings
Sram Red shifters - 280g (including hoods)
Sram Red RD - 136g
Sram Red FD - 70g
Sram Red cassette 11-28
Tune Cappy seatmast - 73g
Prologo C.one.50 - 157g
Planet X carbon bottlecages - 45g
In the mail
Wheelset - Kinlin XR200, Dati hubs, CX-ray 24/28, radial/2x (all silver) and yellow Veloplugs - Hoping it will end up below 1300g
To buy list
3T Ergonova Pro bars
LizardSkin DSP 1,8 tape (white)
Tune GumGum expander
KMC X10SL chain (GoooooOoOOoold)
Planet-X Ultra Light brakes (black)
Look Keo Max or Blade
Ceramic GXP box
I can't decide on a stem. I have three in the run, Zipp Service Course SL, 3T Arx and Deda Zero100. Does anybody know it it's possible to remove logos from the Deda?
I'm hoping to reach a bit under the UCI weight limit at 6,8kg, but we'll see.
Now on to the build.
Build list
Frame sz. 52 - 1174g (including headset!)
Tapered fork (still needs to be cut about 2cm, to get all slammed) - 381g
Sram Red cranks 172,5 (with black Sram Force chainrings) - 475g w/o chainrings
Sram Red shifters - 280g (including hoods)
Sram Red RD - 136g
Sram Red FD - 70g
Sram Red cassette 11-28
Tune Cappy seatmast - 73g
Prologo C.one.50 - 157g
Planet X carbon bottlecages - 45g
In the mail
Wheelset - Kinlin XR200, Dati hubs, CX-ray 24/28, radial/2x (all silver) and yellow Veloplugs - Hoping it will end up below 1300g
To buy list
3T Ergonova Pro bars
LizardSkin DSP 1,8 tape (white)
Tune GumGum expander
KMC X10SL chain (GoooooOoOOoold)
Planet-X Ultra Light brakes (black)
Look Keo Max or Blade
Ceramic GXP box
I can't decide on a stem. I have three in the run, Zipp Service Course SL, 3T Arx and Deda Zero100. Does anybody know it it's possible to remove logos from the Deda?
Last edited by CaptainP on Mon Apr 01, 2013 5:27 pm, edited 2 times in total.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 849
- Joined: Sat May 12, 2012 8:32 am
- Location: Australia
this should turn out really stealthy... is it just me, or does that look like a Fuji Altamira?
I write the weightweenies blog, hope you like it
Disclosure: I'm sponsored by Velocite, but I do give my honest opinion about them (I'm endorsed to race their bikes, not say nice things about them)
Disclosure: I'm sponsored by Velocite, but I do give my honest opinion about them (I'm endorsed to race their bikes, not say nice things about them)
system787 wrote:Is that the FM-015?
I'm pretty sure it is. It also has the Neco headset, so let's just say that this is the FM-015.
I really like the looks of that frame, it's a shame though that it doesn't have icr.
trychle wrote:I really like the looks of that frame, it's a shame though that it doesn't have icr.
The rear brake cable runs internal But yes, it's also one of my only complains.
Anybody have some sugestions on a good light shiny black stem? Budget doesn't allow for Extralite unfortunately...
CWDK wrote:Exciting project Patrick - looking forward to see the finished bike
I'm gonna do a very similiar build on my CAAD.
PS: You're gonna get tired of that white bartape
CW/Mads
Thanks, Mads! I'm pretty exited about the build aswell.
I've chosen to go with the white tape to match it with the saddle.
Maybe i'll get a black saddle and then some crazy colored tape just to get some color in the mix.
Looking gooooood, Patrizz... "stealth" is the way to go...
My advice on the cockpit is to go with a complete 3T - the Arx is stiff AND cheap AND if you by the Team version you can get it in an all-black version.
I know a guy who once did this with pink bar tape... and then he grew up to become a real man, and switched to black
My advice on the cockpit is to go with a complete 3T - the Arx is stiff AND cheap AND if you by the Team version you can get it in an all-black version.
CaptainP wrote:Maybe i'll get a black saddle and then some crazy colored tape just to get some color in the mix.
I know a guy who once did this with pink bar tape... and then he grew up to become a real man, and switched to black
2012 Canyon Aeroad CF 8.0 Di2
2014 Canyon Ultimate CF SLX Di2
2014 Canyon Ultimate CF SLX Di2
Haha!
I'll stick with the white, and see how i like it, after all it's just bartape.
I'll stick with the white, and see how i like it, after all it's just bartape.
szaffiri wrote:I like the cranks! Have those been painted or is that raw carbon with a clear coat?
Sanded and clear coated (flat/mat)
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
I know a guy from DK ho has a cheap deda100 stem with no logos.
Want hes number?
Great build. Where did you find that frame?
Want hes number?
Great build. Where did you find that frame?