Anybody successfully used an SM-PCE1 with a Mac? I run VirtualBox on my Mac for WKO and downloaded the E Tube software but it won't recognize the SM-PCE1 so I can't update the Ultegra Di2. The computer recognizes the device when I check the port but it E Tube won't recognize it. Any help would be appreciated.

_________________
Ridley Noah FAST = 7.38 kg
BMC TM01 = 7.96 kg
Raligh HiLife = 7.46 kg
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=104672

try installing vmware fusion - there's a 30-day free trial so it won't cost anything - i've found this works well with usb devices

but some usb devices/windows drivers seem to go through a few connect/disconnect/connect cycles during device detection/initialiaztion, ones that do this can be a real pain to use with a virtual pc unless you can configure the usb port to be dedicated to the virtual machine rather than arbitrated/prompted for on each connection

I would second the recommendation for VMWare Fusion. It works well with all USB devices, I use it everyday for my job. I wont be able to test the shimano di2 usb dongle with it till my bike arrives.

Thanks for the feedback, I'll check out VMWare Fusion. The odd thing is that I've never had a problem mounting the Garmin or a USB memory stick for uploading files in WKO and the if I check the drive while in the virtual machine it recognizes it but it's like it won't mount completely. May try to find a PC to hook it to to validate that it's not the dongle itself.

_________________
Ridley Noah FAST = 7.38 kg
BMC TM01 = 7.96 kg
Raligh HiLife = 7.46 kg
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=104672

Tried VMWare Fusion and it worked, thanks guys!!

_________________
Ridley Noah FAST = 7.38 kg
BMC TM01 = 7.96 kg
Raligh HiLife = 7.46 kg
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=104672