Project AsiaCarbon with ISP (FM015-ISP) Pics pg. 2

Who are you (no off-topic talk please)

Moderators: MrCurrieinahurry, maxim809, Moderator Team

CaptainP
Posts: 336
Joined: Sun Jun 24, 2012 11:02 am
Location: Danmark
Contact:

by CaptainP

So i was originally going to build my first WW bike based on a Pro-Lite Cuneo with a 3T Funda Pro fork, but then i found a too good offer on a unbranded tapered carbon frame in 3k weave with integrated seatpost. I have always desired a frame with ISP, but avoided it because of the troubles when it comes to traveling(flying). But lucky me, if i remove the cranks it fits right in the bike suitcase, HURRA!

I'm hoping to reach a bit under the UCI weight limit at 6,8kg, but we'll see.



Now on to the build.

Build list
Frame sz. 52 - 1174g (including headset!)
Tapered fork (still needs to be cut about 2cm, to get all slammed) - 381g
Sram Red cranks 172,5 (with black Sram Force chainrings) - 475g w/o chainrings
Sram Red shifters - 280g (including hoods)
Sram Red RD - 136g
Sram Red FD - 70g
Sram Red cassette 11-28
Tune Cappy seatmast - 73g
Prologo C.one.50 - 157g
Planet X carbon bottlecages - 45g

In the mail
Wheelset - Kinlin XR200, Dati hubs, CX-ray 24/28, radial/2x (all silver) and yellow Veloplugs - Hoping it will end up below 1300g

To buy list
3T Ergonova Pro bars
LizardSkin DSP 1,8 tape (white)
Tune GumGum expander
KMC X10SL chain (GoooooOoOOoold)
Planet-X Ultra Light brakes (black)
Look Keo Max or Blade
Ceramic GXP box



I can't decide on a stem. I have three in the run, Zipp Service Course SL, 3T Arx and Deda Zero100. Does anybody know it it's possible to remove logos from the Deda?




Image

Image

Image

Image

Image

Image

Image


Image

Image

Image

Image

Image

Image

Image
Last edited by CaptainP on Mon Apr 01, 2013 5:27 pm, edited 2 times in total.

istigatrice
Posts: 849
Joined: Sat May 12, 2012 8:32 am
Location: Australia

by istigatrice

this should turn out really stealthy... is it just me, or does that look like a Fuji Altamira?
I write the weightweenies blog, hope you like it :)

Disclosure: I'm sponsored by Velocite, but I do give my honest opinion about them (I'm endorsed to race their bikes, not say nice things about them)

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



system787
Posts: 126
Joined: Fri Mar 16, 2012 1:49 pm
Location: LA/OC, California

by system787

Is that the FM-015?

CaptainP
Posts: 336
Joined: Sun Jun 24, 2012 11:02 am
Location: Danmark
Contact:

by CaptainP

system787 wrote:Is that the FM-015?


I'm pretty sure it is. It also has the Neco headset, so let's just say that this is the FM-015.

User avatar
trychle
Posts: 240
Joined: Thu Nov 29, 2012 12:36 pm
Location: The Netherlands
Contact:

by trychle

I really like the looks of that frame, it's a shame though that it doesn't have icr.

Reamens
Posts: 64
Joined: Mon May 17, 2010 11:56 am

by Reamens

Black in Black :)
Very nice build!!

CaptainP
Posts: 336
Joined: Sun Jun 24, 2012 11:02 am
Location: Danmark
Contact:

by CaptainP

trychle wrote:I really like the looks of that frame, it's a shame though that it doesn't have icr.


The rear brake cable runs internal :lol: But yes, it's also one of my only complains.


Anybody have some sugestions on a good light shiny black stem? Budget doesn't allow for Extralite unfortunately... :oops:

CWDK
Posts: 38
Joined: Sun Aug 29, 2010 12:30 pm
Location: Denmark

by CWDK

Exciting project Patrick - looking forward to see the finished bike :)

I'm gonna do a very similiar build on my CAAD.

PS: You're gonna get tired of that white bartape ;)

CW/Mads

CaptainP
Posts: 336
Joined: Sun Jun 24, 2012 11:02 am
Location: Danmark
Contact:

by CaptainP

CWDK wrote:Exciting project Patrick - looking forward to see the finished bike :)

I'm gonna do a very similiar build on my CAAD.

PS: You're gonna get tired of that white bartape ;)

CW/Mads


Thanks, Mads! I'm pretty exited about the build aswell.

I've chosen to go with the white tape to match it with the saddle.

Maybe i'll get a black saddle and then some crazy colored tape just to get some color in the mix.

User avatar
Juggler
Posts: 286
Joined: Thu Jul 26, 2012 8:34 am
Location: Copenhagen, Denmark

by Juggler

Looking gooooood, Patrizz... "stealth" is the way to go...

My advice on the cockpit is to go with a complete 3T - the Arx is stiff AND cheap AND if you by the Team version you can get it in an all-black version.

CaptainP wrote:Maybe i'll get a black saddle and then some crazy colored tape just to get some color in the mix.


I know a guy who once did this with pink bar tape... and then he grew up to become a real man, and switched to black :D
2012 Canyon Aeroad CF 8.0 Di2
2014 Canyon Ultimate CF SLX Di2

CWDK
Posts: 38
Joined: Sun Aug 29, 2010 12:30 pm
Location: Denmark

by CWDK

Sounds like a strange guy - he must be drinking alot of cortado !

CaptainP
Posts: 336
Joined: Sun Jun 24, 2012 11:02 am
Location: Danmark
Contact:

by CaptainP

Haha!

I'll stick with the white, and see how i like it, after all it's just bartape.

szaffiri
Posts: 14
Joined: Wed Dec 08, 2010 4:27 pm

by szaffiri

I like the cranks! Have those been painted or is that raw carbon with a clear coat?

CaptainP
Posts: 336
Joined: Sun Jun 24, 2012 11:02 am
Location: Danmark
Contact:

by CaptainP

szaffiri wrote:I like the cranks! Have those been painted or is that raw carbon with a clear coat?


Sanded and clear coated (flat/mat)

User avatar
Elrey
Posts: 557
Joined: Sat Oct 23, 2010 11:13 pm
Location: Denmark. Yeeees

by Elrey

I know a guy from DK ho has a cheap deda100 stem with no logos.
Want hes number?

Great build. Where did you find that frame?

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Post Reply