So i was originally going to build my first WW bike based on a Pro-Lite Cuneo with a 3T Funda Pro fork, but then i found a too good offer on a unbranded tapered carbon frame in 3k weave with integrated seatpost. I have always desired a frame with ISP, but avoided it because of the troubles when it comes to traveling(flying). But lucky me, if i remove the cranks it fits right in the bike suitcase, HURRA!
I'm hoping to reach a bit under the UCI weight limit at 6,8kg, but we'll see.
Now on to the build.Build list
Frame sz. 52 - 1174g (including headset!)
Tapered fork (still needs to be cut about 2cm, to get all slammed) - 381g
Sram Red cranks 172,5 (with black Sram Force chainrings) - 475g w/o chainrings
Sram Red shifters - 280g (including hoods)
Sram Red RD - 136g
Sram Red FD - 70g
Sram Red cassette 11-28
Tune Cappy seatmast - 73g
Prologo C.one.50 - 157g
Planet X carbon bottlecages - 45gIn the mail
Wheelset - Kinlin XR200, Dati hubs, CX-ray 24/28, radial/2x (all silver) and yellow Veloplugs - Hoping it will end up below 1300gTo buy list
3T Ergonova Pro bars
LizardSkin DSP 1,8 tape (white)
Tune GumGum expander
KMC X10SL chain (GoooooOoOOoold)
Planet-X Ultra Light brakes (black)
Look Keo Max or Blade
Ceramic GXP box
I can't decide on a stem. I have three in the run, Zipp Service Course SL, 3T Arx and Deda Zero100. Does anybody know it it's possible to remove logos from the Deda?