VeloNews seatpost test

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

User avatar
djconnel
Posts: 7917
Joined: Wed Sep 26, 2007 1:57 pm
Location: San Francisco, CA
Contact:

by djconnel

VeloNews seatpost test.

Good stuff: hard data showing my Thomson zero-setback, while being excellent in every other way, is more prone to transmitting vibration than other posts.

Carbon does better than Al in general but it's less difference than some would think.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



whodesigns
in the industry
Posts: 162
Joined: Thu Jan 08, 2009 12:16 pm
Location: Melbourne Australia
Contact:

by whodesigns

Interesting test.

The thing with the carbon posts is that the fibre type and orientation is primarily optimised for volume production, not damping, so not really taking full advantage of the material.
Specialist Sports Technology
http://www.luescherteknik.com.au
Carbon Bike Repairs
http://www.carbonbikerepair.com.au

User avatar
djconnel
Posts: 7917
Joined: Wed Sep 26, 2007 1:57 pm
Location: San Francisco, CA
Contact:

by djconnel

Also they toss in the "conclusion" that carbon posts are good for lighter weight, but I've seen no evidence for that, especially since I'm fairly sure the lightest post in their test is the Thomson (which is what I use).

The issue is you need the post to be strong enough to handle compressive force from the clamp and that requires a lot of material.

The lightest posts out there are carbon (AX-Lightness, for example), but that's the boutique bleeding edge.

NGMN
Posts: 1497
Joined: Mon May 30, 2005 7:13 am

by NGMN

The lightest post is the Ritchey Carbon, at 170 grams.

If anyone is having trouble reading the graphs, you can see them in original size:
http://velonews.competitor.com/files/20 ... ction2.jpg
http://velonews.competitor.com/files/20 ... ostbar.jpg

Pharmstrong
Posts: 328
Joined: Sun Jul 22, 2012 7:17 pm

by Pharmstrong

A shame the Canyon VCLS post wasn't included.

istigatrice
Posts: 849
Joined: Sat May 12, 2012 8:32 am
Location: Australia

by istigatrice

Or the Syntace P6 highflex... Not sure if that's placebo, but it turned my rain bike from a beater to a lounge chair...
I write the weightweenies blog, hope you like it :)

Disclosure: I'm sponsored by Velocite, but I do give my honest opinion about them (I'm endorsed to race their bikes, not say nice things about them)

User avatar
prendrefeu
Posts: 8580
Joined: Wed Oct 31, 2007 10:32 pm
Location: Glendale / Los Angeles, California
Contact:

by prendrefeu

djconnel wrote:The lightest posts out there are carbon (AX-Lightness, for example), but that's the boutique bleeding edge.


NGMN wrote:The lightest setback post is the Ritchey Carbon, at 170 grams.


Thanks for posting the test! (minor editing to NGMN's quote)
But I disagree with you DJ - you don't have to go boutique-expensive or "bleeding edge" to go light. An OMNI seatpost, zero setback, is 116g, uncut.
Performance Bike Shops had a house brand "FORTE" "Precision Seatpost" which, even with setback, came in at 145g uncut, untuned. Still lighter than the Ritchey Carbon, all for $45US. Donald (currently with the lightest bike here) used the Forte Precision seatpost and with some minor tuning brought it down to 86g (ish?)... so... boutique? Hardly.
Exp001 || Other projects in the works.

User avatar
djconnel
Posts: 7917
Joined: Wed Sep 26, 2007 1:57 pm
Location: San Francisco, CA
Contact:

by djconnel

Well, Donald's parts are literally bleeding edge: if he removed another 5 grams from that post he'd end up on the edge of the road, bleeding :). He'd better watch what he eats because if he gains any weight he's going to push his bike over the limit... :) (I'm a Donald fan: his bike is amazing. I'm just teasing.)

I'm talking about commercially available parts. That said, I didn't realize the Forte (or whatever is behind it) came in that light.

My Thomson was 190.3 uncut, 180.6 cut, 137.4 after replacing beefy Thomson clamp with KCNC, 140.0 after adding metal tape to dissipate clamping pressure on carbon saddle.

maxxevv
Posts: 2012
Joined: Wed Feb 09, 2005 4:51 am

by maxxevv

Interesting to say the least. But I believe a more clinical version of the test can be done if the human being was taken out of the equation in the testing.

Also, a 6mm or 1/4" deflection is kinda excessive for normal road riding. That's really rough roads !!

If you must, then there should be a variation in deflection levels, 2mm, 4mm, 6mm, 8mm and at different speeds too. 15km/h, 20km/h, 25km/h, 30km/h, 35km/h and 40km/h.

Only when you have all these nuances tabulated can you have a clearer and more useful picture of which is the best post for what kind of rides ! :beerchug:

maxxevv
Posts: 2012
Joined: Wed Feb 09, 2005 4:51 am

by maxxevv

djconnel wrote:
I'm talking about commercially available parts. That said, I didn't realize the Forte (or whatever is behind it) came in that light.

My Thomson was 190.3 uncut, 180.6 cut, 137.4 after replacing beefy Thomson clamp with KCNC, 140.0 after adding metal tape to dissipate clamping pressure on carbon saddle.


DJ, haven't seen the forte post, but I do have one that's straight 27.2 / 350mm. Comes in at ~165g uncut, untuned. Just changing the twin adjustor bolts to titanium ones will bring it down ~8-10g I believe.

Imaking20
Posts: 2260
Joined: Fri Nov 18, 2011 5:19 am

by Imaking20

Cool test, thanks for sharing.


Iirc, my 240mm Thomson masterpiece setback post came in under the 170 mark... I thought the Fizik post felt more comfortable though... Glad to see it wasn't placebo!

User avatar
bura
Posts: 842
Joined: Mon Mar 01, 2010 8:07 pm
Location: Civitatis Vaticanae

by bura

Is this an all American post test?
Just asking because I can not see brands from other than US based manufacturers.
Correct me if I am wrong.
I partly agree with prendrefeu because the Omni seat post is identical to the Token carbon post.
So where are 3T,Deda,ITM,KCNC,Token,Merek and many others?
Aren't above mentioned posts commercial available in the US?
WW know where to get light,reliable and not overpriced seat posts.Not so VeloNews. :)
Kuota Kom Evo
viewtopic.php?f=10&t=111825&p=955235#p955235" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
SOLD

User avatar
andy2
in the industry
Posts: 711
Joined: Sun Dec 16, 2007 9:33 pm
Location: Luxembourg / Sweden

by andy2

Hi guys,

Here is another test with some more brands:

http://www.schmolke-carbon.de/carbon/ca ... imiert.pdf" onclick="window.open(this.href);return false;

It's obviously taken from the Schmolke site so you can guess who the winner is, but the data is still pretty interesting and shows how widely varied the flex
is between the posts. It should form an interesting point of comparison to the VeloNews test.
I also like that the test displays the data in industry standard Nmm instead of fractions of inches.
So the comfiest (Schmolke) 31.6 post has a deflection of 71Nmm whereas the stiffest (FSA) 31.6 is at 273Nmm.
Both these are carbon btwy.
You can also conclude that there is basically no significant relationship between comfort and price or for that matter comfort and weight.
rolobikes

Imaking20
Posts: 2260
Joined: Fri Nov 18, 2011 5:19 am

by Imaking20

Great read.... I'm guessing. Me no speaky ze German :(

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



maxxevv
Posts: 2012
Joined: Wed Feb 09, 2005 4:51 am

by maxxevv

Don't completely understand the fine details of the description but I would discount the test methodology there.

Maximum deflection at low loads does not automatically equate to a good quality ride. The ability to attenuate for multitude of road buzz frequencies is far more crucial in real world riding. Its almost like saying the suspension fork with the softest spring settings is the best fork for MTBs !

The Velonews methodology is far more realistic though as I mentioned in a previous comment, its only really useful if they tested the posts at a variety of undulation heights and wheel spin speeds. And that the human subject is taken out of the context.

Post Reply