Dura Ace 9000 hubs

Page 2 of 3

[ 40 posts ]

Go to page Previous  1, 2, 3  Next

Print view Previous topic | Next topic

Author	Message
Tinea Pedis	Post subject: Re: Dura Ace 9000 hubs Posted: Tue Nov 27, 2012 11:13 am
Moderator Joined: Sat Mar 14, 2009 6:08 am Posts: 7316 Location: Geeeelong!	No more silver hubs. Like Campag. Such a pity. _________________ Baum Ristretto, Baum Mondrian Corretto & the '89 Merckx! | "If you could eat it in one sitting, hold your line." | twitter.com/Tinea_Pedis
Top

upside	Post subject: Re: Dura Ace 9000 hubs Posted: Tue Nov 27, 2012 12:25 pm
Joined: Fri Mar 09, 2007 1:26 am Posts: 372 Location: USA	They are black. If I knew how to post pic's here I would take a pic of a carbon clincher I built recently. The rear wheel came in at 720 grams.. not bad.
Top

Weenie	Post subject: Re: Dura Ace 9000 hubs Posted: Tue Nov 27, 2012 12:25 pm
	Shimano Dura-Ace components & groupset at reasonable prices from 10.90 € (including 19% VAT) 59 components
Top

lovej	Post subject: Re: Dura Ace 9000 hubs Posted: Wed Nov 28, 2012 7:44 pm
Joined: Sun Jan 17, 2010 11:04 am Posts: 16	upside wrote: They are black. If I knew how to post pic's here I would take a pic of a carbon clincher I built recently. The rear wheel came in at 720 grams.. not bad. mine shine a blue / grey in the sun.
Top

petal666	Post subject: Re: Dura Ace 9000 hubs Posted: Mon Dec 03, 2012 10:42 pm
Joined: Fri Dec 12, 2008 5:19 am Posts: 606 Location: Brisbane, Oz	Tinea Pedis wrote: No more silver hubs. Like Campag. Such a pity. It is a shame, and unlike campag you can't use the older shiny version on current groupsets. I still have a brand new set of shiny record hubs in the cupboard.
Top

euan	Post subject: Re: Dura Ace 9000 hubs Posted: Mon Dec 03, 2012 10:58 pm
Joined: Sat Sep 05, 2009 11:20 am Posts: 1306	Nothing a little caustic soda won't sort out _________________ "Step forward the climber and all those who worship at the altar of lightness" - R. Millar
Top

policedutchdog	Post subject: Re: Dura Ace 9000 hubs Posted: Wed Dec 19, 2012 6:03 pm
Joined: Fri Apr 10, 2009 4:50 pm Posts: 20 Location: USA	I'm also building a new 11-speed wheel set using the new DA9000 24-hole rear hub and Stan's Alpha 340 rim. I would like to build it using 3-cross on the drive side and radial on the non-drive side but having difficulty calculating the spoke lengths. Any assistance would be appreciated. Scott
Top

petal666	Post subject: Re: Dura Ace 9000 hubs Posted: Thu Dec 20, 2012 2:31 am
Joined: Fri Dec 12, 2008 5:19 am Posts: 606 Location: Brisbane, Oz	Pretty sure you can't build 3x on a 24 holed hub.
Top

sud35	Post subject: Re: Dura Ace 9000 hubs Posted: Wed Feb 20, 2013 3:02 am
Joined: Sat Mar 06, 2010 8:29 am Posts: 1	Attached is a screenshot for different spoke combos for this hub with Stan's Alpha 340 rim. Cheers, Jason. Attachments: Shimano 9000rear & stans340.jpg [ 91.26 KiB | Viewed 1316 times ]
Top

743power	Post subject: Dura Ace 9000 hubs Posted: Wed Feb 20, 2013 3:06 am
Shop Wrench Joined: Sat Nov 29, 2008 6:15 am Posts: 691	What program is that screenshot from? _________________ "Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction."
Top

michel2	Post subject: Re: Dura Ace 9000 hubs Posted: Wed Feb 20, 2013 4:48 am
Joined: Mon Jan 10, 2005 10:47 am Posts: 796 Location: somewere floating between here and the other side	petal666 wrote: Pretty sure you can't build 3x on a 24 holed hub. Why is that ? Are the spoke going to cross spoke heads of other spokes ?
Top

Doolop	Post subject: Re: Dura Ace 9000 hubs Posted: Wed Feb 20, 2013 6:04 am
Joined: Wed Jul 08, 2009 9:19 pm Posts: 545	743power wrote: What program is that screenshot from? Its from here: http://lenni.info/edd/
Top

eric01	Post subject: Re: Dura Ace 9000 hubs Posted: Wed Feb 20, 2013 7:52 am
Joined: Mon Feb 06, 2006 1:06 am Posts: 192	michel2 wrote: petal666 wrote: Pretty sure you can't build 3x on a 24 holed hub. Why is that ? Are the spoke going to cross spoke heads of other spokes ? Generally speaking, that's one reason and the other is avoid extreme angles entering the rim. Many more experienced wheel builders than I on this forum could provide a more precise answer... _________________ Scott Foil Team Issue, Cervelo R3, Strong Titanium
Top

bikerjk	Post subject: Re: Dura Ace 9000 hubs Posted: Sat Aug 24, 2013 6:51 am
Joined: Wed Aug 14, 2013 6:44 am Posts: 3	Guerdi wrote: If someone's interested in building a wheelset with those new 9000 hubs, here are the specs : 9000 Freehub : Spoke Holes PCD : 44 mm (Non drive side) / 45 mm (drive side) Flange distance : 56.9 mm Flange distance 28 holes : 56.5 mm Dish : 9.75 mm Dish 28 holes : 9.95 mm 9000 Front hub : Spoke Holes PCD : 38 mm Flange distance : 74.0 mm Does anyone know the spoke hole diameter on the front and rear hubs? I read an article suggesting narrow spoke holes such that a Sapim CX-Ray spoke wouldn't fit but this sounds hard to believe.
Top

WMW	Post subject: Re: Dura Ace 9000 hubs Posted: Sun Aug 25, 2013 12:18 am
in the industry Joined: Sun Jul 29, 2012 2:59 pm Posts: 504 Location: Ruidoso, NM	They fit. _________________ formerly rruff...
Top

bikerjk	Post subject: Re: Dura Ace 9000 hubs Posted: Sun Aug 25, 2013 4:41 am
Joined: Wed Aug 14, 2013 6:44 am Posts: 3	WMW wrote: They fit. Thanks. So this guy has it all wrong then. http://paolocoppo.drupalgardens.com/content/dura-ace-9000-hubs-finally-here
Top

Weenie	Post subject: Re: Dura Ace 9000 hubs Posted: Sun Aug 25, 2013 4:41 am
	Shimano Dura-Ace components & groupset at reasonable prices from 10.90 € (including 19% VAT) 59 components
Top

Display posts from previous: All posts1 day7 days2 weeks1 month3 months6 months1 year Sort by AuthorPost timeSubject AscendingDescending

Page 2 of 3

[ 40 posts ]

Go to page Previous  1, 2, 3  Next