Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sun Jul 24, 2016 2:08 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 39 posts ]  Go to page Previous 1 2 3
Author Message
PostPosted: Thu Nov 29, 2012 7:56 pm 
Offline
User avatar

Joined: Tue Jan 23, 2007 11:22 am
Posts: 3657
Location: Leg hurty
I think the important part of the quote beforehand is....'If' (No disrespect to you Ron BTW)

_________________
Pedalling Law Student.


Top
   
PostPosted: Thu Nov 29, 2012 10:34 pm 
Offline

Joined: Mon Dec 14, 2009 6:26 pm
Posts: 839
WMW wrote:
konky wrote:
I had Ti spokes on my AX/tune (830g i think) wheel build and this happened to me twice in quite a short period of time.


Which Ti spokes?


Pillar. And built by the excellent Adrien of RA who was great and did the replacement free of charge. Very good guy.


Top
   
PostPosted: Fri Nov 30, 2012 2:23 am 
Offline
in the industry
User avatar

Joined: Sun Jul 29, 2012 2:59 pm
Posts: 832
Location: Ruidoso, NM
thisisnotaspoon wrote:
I run my pads quite close to the rim (<1mm)


No reason to do that. Best adjustment is so you can just lock up the wheel when the levers hit the bar. That is where you have the best hand force and control.

_________________
formerly rruff...


Top
   
PostPosted: Fri Nov 30, 2012 2:27 am 
Offline
in the industry
User avatar

Joined: Sun Jul 29, 2012 2:59 pm
Posts: 832
Location: Ruidoso, NM
konky wrote:
Pillar. And built by the excellent Adrien of RA who was great and did the replacement free of charge. Very good guy.


I'm guessing they were the super light ones, then?

It's a shame that they have durability issues. They'd be awesome for making stiff-light rear wheels otherwise. A better alternative to triplet IMO.

It's also a shame that no one wants to make bladed SS spokes that are that light...

_________________
formerly rruff...


Top
   
PostPosted: Fri Nov 30, 2012 9:48 am 
Offline

Joined: Sat May 12, 2012 8:32 am
Posts: 602
Location: Adelaide, Australia
What about the Sapim CX-Super (or whatever its called) and the Pillar Megalite SS?

_________________
I write the weightweenies blog, hope you like it :)

My SwiftCarbon Ultravox

My Velocite Selene

Disclosure: I'm sponsored by Velocite, but I do give my honest opinion about them (I'm endorsed to race their bikes, not say nice things about them)


Top
   
PostPosted: Fri Nov 30, 2012 11:19 am 
Offline

Joined: Thu Aug 30, 2012 8:42 pm
Posts: 95
For the Ti spoke debate, I was under the impression they were a bad idea simply because you can't use alloy nipples, so if you wanted to save weight alloy nipples and steel spokes were barely any heavier than Ti and brass.

Quote:
No reason to do that. Best adjustment is so you can just lock up the wheel when the levers hit the bar. That is where you have the best hand force and control.


Hmmm, I might look into that, TBH I like them with no freeplay, which is odd seeing as I run the brakes on my mountainbike completely the opposite, the bite point wound right in so that the levers are almost at the bars before they even start. But then they're the new XT's on 203/180 with organic pads so have almost 100% power straight away (and very powerfull).

Quote:
It's also a shame that no one wants to make bladed SS spokes that are that light...


Surely not possible without resorting to really thin sections? In my head that seems like a bad idea (would it not start to oscilate like blowing on a blade of grass?)


Top
   
PostPosted: Fri Nov 30, 2012 8:06 pm 
Offline
in the industry
User avatar

Joined: Sun Jul 29, 2012 2:59 pm
Posts: 832
Location: Ruidoso, NM
verycreativeusername wrote:
What about the Sapim CX-Super (or whatever its called) and the Pillar Megalite SS?


I have some of the Pillars... they should be ~82% of the stiffness of the CX-Rays, which isn't bad... but the Pillar Ti are ~62%.

I realized when I was helping with the Fairwheel hub article that using light spokes on the NDS and a high spacing would effectively have the same benefits as triplet without the downsides... ie rim doesn't need to be that stiff or have center drilling, any holecount is fine, wheel doesn't go so far out true if you lose a NDS spoke, etc. Spokes with the same stiffness as the Pillar Ti would be about ideal, combined with an NDS spacing in the 42-44mm range.

_________________
formerly rruff...


Top
   
PostPosted: Fri Nov 30, 2012 8:11 pm 
Offline
in the industry
User avatar

Joined: Sun Jul 29, 2012 2:59 pm
Posts: 832
Location: Ruidoso, NM
You can use aluminum nipples with Ti spokes.

You think the spokes would "flutter"?... not a chance of that...

_________________
formerly rruff...


Top
   
PostPosted: Tue Dec 11, 2012 8:46 pm 
Offline

Joined: Tue Feb 19, 2008 12:27 am
Posts: 134
Ti spokes may not be for everyone but they can have their place. I have a set of Edge 45s built by Jeremy (Alchemy) with his hubs front/rear and Pillar Ti spokes. Sub 1,000 grams. Wheelset rocks in crits with hills. I can attack a hill unlike with any other wheelset in my arsenal. And I am a 145 pound sprinter (self proclaimed!). The wheelset is also fantastic for climbing mountains, however, the wheelset makes me a bit nervous descending. I have much more confidence descending on my 303 tubies; I don't know if its the light weight or spoke flex that bugs me. But if I want to try to hang with the stronger climbers on a climbing training ride (hill climb races are really not my cup of tea), I am on this wheelset. So the wheelset has its place depending on the ride or race. YMMV


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 39 posts ]  Go to page Previous 1 2 3

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. New Wheel Day!!!

[ Go to page: 1 2 ]

in Road

dvdslw

20

1903

Mon Nov 16, 2015 7:11 pm

dvdslw View the latest post

There are no new unread posts for this topic. Rear wheel help

in Road

ibikelover

0

308

Tue Aug 04, 2015 9:23 am

ibikelover View the latest post

There are no new unread posts for this topic. Wheel and Shifting

in Road

ipenguinking

7

276

Sat Apr 23, 2016 1:11 am

fh8425 View the latest post

There are no new unread posts for this topic. Help to choose a Wheel

in Road

marcio riva

2

425

Fri Dec 11, 2015 10:24 am

jet520 View the latest post

There are no new unread posts for this topic. Hub in Lightweight disc wheel

in Road

Daveke

10

892

Wed Aug 12, 2015 4:07 pm

LeDuke View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], Google [Bot], MSNbot Media, Yahoo [Bot] and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited