HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Articles FAQ Contact About




Post new topic Reply to topic  [ 25 posts ] 
Go to page 1, 2  Next
Author Message
 Post subject: Polishing bicycle parts
PostPosted: Thu Nov 22, 2012 9:41 am 
Offline
User avatar

Joined: Tue Aug 08, 2006 1:41 pm
Posts: 845
Location: The Netherlands
I always had a soft spot for polished bicycle parts, but up until recently I had never been able to achieve the high polish look I was looking for.

The change has been brought about by the purchase of a polishing machine, two different polishing wheels and two different polishing compounds. That is pretty much all it takes to get a nice finish on aluminium bike parts. Before I used hand polishing compounds and a rag and a polishing wheel you can insert into a drill, but neither gave the results I wanted.

Attached are a couple of pictures of a pair of C-Record hubs I polished yesterday. Unlike most bicycle parts, early Campagnolo hubs are not anodized, making them a great starting point for learning how to polish stuff. First you need to clean the outside of the hub thoroughly (I used Finish Line speed degreaser). Then you start to polish the hub using the cotton disc and the matching compound for this disc. You will need to apply some pressure to get the disc to do its trick. Use gloves while doing this because the part you are polishing will get hot (that is if you are doing it right). You can see the results of your labour within seconds, which is pretty cool. After you finish polishing the hub with the cotton disc, clean it again to remove any polishing compound. Now you repeat the process with a flannel disc and the matching compound. Again you will see major improvement almost instantly. The final step is to clean the hub again and give it a coat of (liquid) wax for the ultimate shine. All this took me under an hour.

If you want to polish an anodized part, you will have to remove the anodizing first. Doing this is pretty tricky and requires using lye. I have yet to do this successfully, but apparently in the US they sell Easy-Off oven cleaner which is great for this.


Attachments:
File comment: Before
C-Record1.jpg
C-Record1.jpg [ 158.65 KiB | Viewed 2487 times ]
File comment: The machine
C-Record2.jpg
C-Record2.jpg [ 150.13 KiB | Viewed 2487 times ]
File comment: Half way through
C-Record3.jpg
C-Record3.jpg [ 154.3 KiB | Viewed 2487 times ]
File comment: The final result
C-Record4.jpg
C-Record4.jpg [ 142.69 KiB | Viewed 2487 times ]

_________________
My Renovo R1 wooden bike project and the reason for my passion for all that is wood.

Check it out: the most amazing vintage Colnago, Merckx and Pinarello collection
Top
 Profile  
 
 Post subject: Polishing bicycle parts
Posted: Thu Nov 22, 2012 9:41 am 


Top
  
 
PostPosted: Thu Nov 22, 2012 9:47 am 
Offline
User avatar

Joined: Tue Aug 08, 2006 1:41 pm
Posts: 845
Location: The Netherlands
This is an example of a set I polished a while back. They started out looking pretty much the same as the C-Record hubs. By the way, the polishing wheel is also great for polishing damaged hub cones

Image

_________________
My Renovo R1 wooden bike project and the reason for my passion for all that is wood.

Check it out: the most amazing vintage Colnago, Merckx and Pinarello collection


Top
 Profile  
 
PostPosted: Thu Nov 22, 2012 9:55 am 
Offline

Joined: Mon Jan 12, 2004 12:32 pm
Posts: 3552
Location: UK & WEST AFRICA
Nice work. I've just had a bunch of stuff polished myself. Extralite stem, headset, cranks; Van Nicholas TI seatpost. Maybe also think about doing it to some rims.


Top
 Profile  
 
PostPosted: Thu Nov 22, 2012 10:23 am 
Offline
User avatar

Joined: Tue Aug 08, 2006 1:41 pm
Posts: 845
Location: The Netherlands
Any tips on how to remove the anodizing?

_________________
My Renovo R1 wooden bike project and the reason for my passion for all that is wood.

Check it out: the most amazing vintage Colnago, Merckx and Pinarello collection


Top
 Profile  
 
PostPosted: Thu Nov 22, 2012 10:37 am 
Offline

Joined: Tue Nov 24, 2009 12:37 pm
Posts: 100
Remove Anodising = Use Oven Cleaner

_________________
Scott CR1 - 12.84Ib


Top
 Profile  
 
PostPosted: Thu Nov 22, 2012 10:55 am 
Offline
User avatar

Joined: Tue Aug 08, 2006 1:41 pm
Posts: 845
Location: The Netherlands
Unfortunately not every oven cleaner uses the same ingredients. The ones sold in The Netherlands for example don't work for removing anodizing.

_________________
My Renovo R1 wooden bike project and the reason for my passion for all that is wood.

Check it out: the most amazing vintage Colnago, Merckx and Pinarello collection


Top
 Profile  
 
PostPosted: Thu Nov 22, 2012 2:12 pm 
Offline

Joined: Mon Jan 12, 2004 12:32 pm
Posts: 3552
Location: UK & WEST AFRICA
I also use oven cleaner. I'm not in the UK at present so don't know which brand, but it defintely worked for me. It was a spray can that 'foams' up.


Top
 Profile  
 
PostPosted: Thu Nov 22, 2012 4:50 pm 
Offline
User avatar

Joined: Tue Aug 08, 2006 1:41 pm
Posts: 845
Location: The Netherlands
@KB: I would love to hear what you are using!

_________________
My Renovo R1 wooden bike project and the reason for my passion for all that is wood.

Check it out: the most amazing vintage Colnago, Merckx and Pinarello collection


Top
 Profile  
 
PostPosted: Thu Nov 22, 2012 6:45 pm 
Offline
in the industry
User avatar

Joined: Fri Sep 09, 2011 2:38 pm
Posts: 70
Location: Brighton, UK
That might be Mr Muscle Oven cleaner then!

_________________
Strada Hand Built Wheels
http://www.stradawheels.co.uk


Top
 Profile  
 
PostPosted: Thu Nov 22, 2012 8:00 pm 
Offline

Joined: Mon Mar 01, 2010 8:07 pm
Posts: 643
SW, such a machine is the best tool to polish parts. :thumbup:
I know someone who hand made some walnut wooden parts for cars and used the same machine to polish the top varnish layer on the top of the walnut veneer.This is a real dusty job and it is good to wear some mask.
He used cotton discs and some light blue hard compound which he put on the cotton discs before polishing clear varnish.
Which paste or compound are you using when polishing metal parts and do you apply it also onto the cotton disc?
Thanks.

_________________
Kuota Kom Evo
viewtopic.php?f=10&t=111825&p=955235#p955235" onclick="window.open(this.href);return false;


Top
 Profile  
 
PostPosted: Fri Nov 23, 2012 8:06 am 
Offline

Joined: Mon Jan 12, 2004 12:32 pm
Posts: 3552
Location: UK & WEST AFRICA
StradaJon wrote:
That might be Mr Muscle Oven cleaner then!

Yes, the very one. Works well.


Top
 Profile  
 
PostPosted: Fri Nov 23, 2012 9:02 am 
Offline
User avatar

Joined: Tue Aug 08, 2006 1:41 pm
Posts: 845
Location: The Netherlands
Great! Will give that a try then. How long does it take for the oven cleaner to work its magic?

I used drain opener in the past on a pair of DA 7700 cranks, but that pretty much destroyed them, instead of leaving a nice even dull finish :|

_________________
My Renovo R1 wooden bike project and the reason for my passion for all that is wood.

Check it out: the most amazing vintage Colnago, Merckx and Pinarello collection


Top
 Profile  
 
PostPosted: Fri Nov 23, 2012 10:22 am 
Offline

Joined: Sun Oct 26, 2008 3:12 pm
Posts: 164
The bike shop where I work sends all the aluminum polishing to a specialist, who uses (if I remember correcty) an acid mixture to remove anodization. He once told me, that he needs to alter the mixture for different alloys: the DA 7700/XTR 9XX crank is made of duraluminum alloy, which is very sensitive to such a chemical process. He uses a machine similar to yours for polishing, with mask and elbow-lenght gloves. He also has a few special polishing compounds for different alloys. Next time I have to visit him, I can get more info...


Attachments:
record_polish.jpg
record_polish.jpg [ 77.99 KiB | Viewed 2051 times ]
Top
 Profile  
 
PostPosted: Fri Nov 23, 2012 10:44 am 
Offline
User avatar

Joined: Tue Aug 08, 2006 1:41 pm
Posts: 845
Location: The Netherlands
WOW :shock: ! That was what I was hoping my DA cranks would like look.

_________________
My Renovo R1 wooden bike project and the reason for my passion for all that is wood.

Check it out: the most amazing vintage Colnago, Merckx and Pinarello collection


Top
 Profile  
 
Posted: Fri Nov 23, 2012 10:44 am 


Top
  
 
PostPosted: Fri Nov 23, 2012 12:11 pm 
Offline
User avatar

Joined: Tue Aug 08, 2006 1:41 pm
Posts: 845
Location: The Netherlands
bura wrote:
Which paste or compound are you using when polishing metal parts and do you apply it also onto the cotton disc?
Thanks.


I use blue compound with a cotton disc and white compound with a flannel disc. If a part shows deeper scratches then I go for brown compound with a cottom disc first or I use fine grit sanding paper (800+). The color of the compound is not the same for every manufacturer though.

_________________
My Renovo R1 wooden bike project and the reason for my passion for all that is wood.

Check it out: the most amazing vintage Colnago, Merckx and Pinarello collection


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 25 posts ] 
Go to page 1, 2  Next


Who is online

Users browsing this forum: cajer, Google Adsense [Bot], Jdrsvin and 40 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Bicycle frame analysis on FEA

in Road

An1MuS

11

1168

Thu Apr 17, 2014 12:22 pm

An1MuS View the latest post

There are no new unread posts for this topic. Attachment(s) Ultrasonic Parts Washer?

in Road

freemyheel

14

890

Sun Nov 09, 2014 11:28 pm

WheresWaldo View the latest post

There are no new unread posts for this topic. A couple of tuned red parts.

in Road

xena

14

1281

Sat Apr 19, 2014 1:29 am

spdntrxi View the latest post

There are no new unread posts for this topic. XRD Racing parts or Ravx??

in Road

anaerobic

1

218

Sun Feb 16, 2014 7:54 am

michel2 View the latest post

There are no new unread posts for this topic. Di2 TT build, small parts not to forget

in Road

Tinea Pedis

9

611

Tue Nov 18, 2014 5:24 am

Tinea Pedis View the latest post


It is currently Fri Nov 21, 2014 7:17 pm

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB