Polishing bicycle parts
Moderator: robbosmans
I always had a soft spot for polished bicycle parts, but up until recently I had never been able to achieve the high polish look I was looking for.
The change has been brought about by the purchase of a polishing machine, two different polishing wheels and two different polishing compounds. That is pretty much all it takes to get a nice finish on aluminium bike parts. Before I used hand polishing compounds and a rag and a polishing wheel you can insert into a drill, but neither gave the results I wanted.
Attached are a couple of pictures of a pair of C-Record hubs I polished yesterday. Unlike most bicycle parts, early Campagnolo hubs are not anodized, making them a great starting point for learning how to polish stuff. First you need to clean the outside of the hub thoroughly (I used Finish Line speed degreaser). Then you start to polish the hub using the cotton disc and the matching compound for this disc. You will need to apply some pressure to get the disc to do its trick. Use gloves while doing this because the part you are polishing will get hot (that is if you are doing it right). You can see the results of your labour within seconds, which is pretty cool. After you finish polishing the hub with the cotton disc, clean it again to remove any polishing compound. Now you repeat the process with a flannel disc and the matching compound. Again you will see major improvement almost instantly. The final step is to clean the hub again and give it a coat of (liquid) wax for the ultimate shine. All this took me under an hour.
If you want to polish an anodized part, you will have to remove the anodizing first. Doing this is pretty tricky and requires using lye. I have yet to do this successfully, but apparently in the US they sell Easy-Off oven cleaner which is great for this.
The change has been brought about by the purchase of a polishing machine, two different polishing wheels and two different polishing compounds. That is pretty much all it takes to get a nice finish on aluminium bike parts. Before I used hand polishing compounds and a rag and a polishing wheel you can insert into a drill, but neither gave the results I wanted.
Attached are a couple of pictures of a pair of C-Record hubs I polished yesterday. Unlike most bicycle parts, early Campagnolo hubs are not anodized, making them a great starting point for learning how to polish stuff. First you need to clean the outside of the hub thoroughly (I used Finish Line speed degreaser). Then you start to polish the hub using the cotton disc and the matching compound for this disc. You will need to apply some pressure to get the disc to do its trick. Use gloves while doing this because the part you are polishing will get hot (that is if you are doing it right). You can see the results of your labour within seconds, which is pretty cool. After you finish polishing the hub with the cotton disc, clean it again to remove any polishing compound. Now you repeat the process with a flannel disc and the matching compound. Again you will see major improvement almost instantly. The final step is to clean the hub again and give it a coat of (liquid) wax for the ultimate shine. All this took me under an hour.
If you want to polish an anodized part, you will have to remove the anodizing first. Doing this is pretty tricky and requires using lye. I have yet to do this successfully, but apparently in the US they sell Easy-Off oven cleaner which is great for this.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 553
- Joined: Tue Nov 24, 2009 12:37 pm
- Location: London
Remove Anodising = Use Oven Cleaner
Cervelo S3 Disc - 6.78Kg/14.94Ib
Scott CR1 - 5.69Kg/12.54Ib
Scott Addict RC - 6.92Kg/15.25Ib
OnOne - Free Ranger - 8.68Kg/19.1Ib
Scott CR1 - 5.69Kg/12.54Ib
Scott Addict RC - 6.92Kg/15.25Ib
OnOne - Free Ranger - 8.68Kg/19.1Ib
- StradaJon
- in the industry
- Posts: 133
- Joined: Fri Sep 09, 2011 2:38 pm
- Location: Brighton, UK
- Contact:
That might be Mr Muscle Oven cleaner then!
Strada Hand Built Wheels
http://www.stradawheels.co.uk
http://www.stradawheels.co.uk
SW, such a machine is the best tool to polish parts.
I know someone who hand made some walnut wooden parts for cars and used the same machine to polish the top varnish layer on the top of the walnut veneer.This is a real dusty job and it is good to wear some mask.
He used cotton discs and some light blue hard compound which he put on the cotton discs before polishing clear varnish.
Which paste or compound are you using when polishing metal parts and do you apply it also onto the cotton disc?
Thanks.
I know someone who hand made some walnut wooden parts for cars and used the same machine to polish the top varnish layer on the top of the walnut veneer.This is a real dusty job and it is good to wear some mask.
He used cotton discs and some light blue hard compound which he put on the cotton discs before polishing clear varnish.
Which paste or compound are you using when polishing metal parts and do you apply it also onto the cotton disc?
Thanks.
Kuota Kom Evo
viewtopic.php?f=10&t=111825&p=955235#p955235" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
SOLD
viewtopic.php?f=10&t=111825&p=955235#p955235" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
SOLD
The bike shop where I work sends all the aluminum polishing to a specialist, who uses (if I remember correcty) an acid mixture to remove anodization. He once told me, that he needs to alter the mixture for different alloys: the DA 7700/XTR 9XX crank is made of duraluminum alloy, which is very sensitive to such a chemical process. He uses a machine similar to yours for polishing, with mask and elbow-lenght gloves. He also has a few special polishing compounds for different alloys. Next time I have to visit him, I can get more info...
bura wrote: Which paste or compound are you using when polishing metal parts and do you apply it also onto the cotton disc?
Thanks.
I use blue compound with a cotton disc and white compound with a flannel disc. If a part shows deeper scratches then I go for brown compound with a cottom disc first or I use fine grit sanding paper (800+). The color of the compound is not the same for every manufacturer though.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com