lovej wrote:I have used a campy 11 speed wheel in my 9000. shifting is 95% of the shimano setup.
I assume that was using a Shimano chain? Shifting may even improve with a KMC or Campag chain.
Moderator: robbosmans
lovej wrote:I have used a campy 11 speed wheel in my 9000. shifting is 95% of the shimano setup.
mnmasotto wrote:I swapped out the Shimano 11 speed wheel for the Campy 11 speed wheel last night. The shifting was substandard.
WMW wrote:mnmasotto wrote:Give me some ideas about what to adjust.
Give me an idea of what is wrong...?
Adjust the limit screws to the proper range, and use the barrel to line up the gears.
It is my understanding that the Campy 11 chain is a little thinner in some way than a Shimano chain. I am not sure about this, if true then it would be interesting to see if shifting is perfect with Praxis rings in the front, Campy 11 chain and Campy 11 cassette in the back. I would suspect that this would be a popular setup if it works.
DaveS wrote:Campy spacing is 3.8mm, not 3.85mm. The cogs are 1.6mm and the spacers are 2.2mm. Of course those are the nominal dimensions and all parts have an allowable tolerance, that results in small variations.
You'll get more accurate results measuring the individual parts, or a riveted together group, rather than a whole cassette.
If Shimano 11 spacing is 3.8mm, then the match should be as perfect as possible, with Campy.