Rotor 3D+ vs Sram Red for bbright

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Naturel
Posts: 107
Joined: Sun Mar 01, 2009 12:34 am
Location: Belgium

by Naturel

I receive an answer from a webstore for BB Rotor:

For Shimano cranks (24mm axle diameter) the following BB would be your choice:
- Rotor PressFit 4624 BBright Steel Bottom Bracket (item code: ROT134528)

For Sram BB30 cranks (30mm axle diameter) you can choose between the following BBs:
- Rotor Press Fit 4630 Road Steel Bottom Bracket (item code: ROT134525)
- Rotor Press Fit 4630 Road Ceramic Bottom Bracket (item code: ROT134526)


Than now, it is possible to place a BB30 crankset on a Bbright Cervelo frameset :thumbup:

1415chris
Posts: 1433
Joined: Sat Apr 18, 2009 8:59 am
Location: Surrey UK

by 1415chris

If you mange to put it on, don't forget to let us know :wink:
I would strongly urge you to read carefully what Sram 30mm spindle crank you can use with bbright.
I can also refer you to:
http://www.bbright.net/" and Cervelo forum.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



drmutley
Posts: 338
Joined: Fri Feb 11, 2011 4:23 am

by drmutley

1415chris wrote:If you mange to put it on, don't forget to let us know :wink:
I would strongly urge you to read carefully what Sram 30mm spindle crank you can use with bbright.
I can also refer you to:
http://www.bbright.net/" onclick="window.open(this.href);return false;" and Cervelo forum.



Good advice

thisisatest
Shop Owner
Posts: 1980
Joined: Sat Jun 13, 2009 4:02 am
Location: NoVA/DC

by thisisatest

IF you do, in fact, try to install a Red crank WITH INTEGRATED SPIDER onto a bbright frame, i'll be here to say I told you so.

Naturel
Posts: 107
Joined: Sun Mar 01, 2009 12:34 am
Location: Belgium

by Naturel

And anybody use this model :

FSA BBright Adaptor Bearingcups for MegaExo Road Carbon Cranksets

Is this ok for Shimano crankset?

thisisatest
Shop Owner
Posts: 1980
Joined: Sat Jun 13, 2009 4:02 am
Location: NoVA/DC

by thisisatest

You will likely need a 1mm spacer between the bearings and the arms on one or both sides. Otherwise, your shimano preload cap will bottom out early. Other than that, it fits.

Naturel
Posts: 107
Joined: Sun Mar 01, 2009 12:34 am
Location: Belgium

by Naturel

thisisatest wrote:You will likely need a 1mm spacer between the bearings and the arms on one or both sides. Otherwise, your shimano preload cap will bottom out early. Other than that, it fits.


Thank You.
Ok but with which model of bottom adapter?

thisisatest
Shop Owner
Posts: 1980
Joined: Sat Jun 13, 2009 4:02 am
Location: NoVA/DC

by thisisatest

For the one you mentioned- FSA bbright adapter for carbon megaexo road cranksets.
If you find their adapter for ALUMINUM megaexo road cranksets, you will not need any 1mm spacers.

Post Reply