unfortunately I doubt that I could make it. If I'm right the seatpost tube isn't round?
Probably I could copy the shape of that tube, but don't know if it would make sense to me because the moulds are quite expensive, if you know what I mean. I already wanted to make a few different projects with some different tube shapes and had quite a lot of problems. But if you could get some photos of the seatpost profile I could let you know.
Otherwise here are some more details from the measurments for a seatpost combo. I get a few questions regarding the combo measurments/position, and here are some of my answers:
It's completely custom, so any position is possible. Here just one quick sketch to show you the most important details:X:
setback - measured from the virtual begining of the seatpost till the saddle nose, level with the saddle shellY:
seatpost lenght - measured from the top of the saddle till the end of the seatpost (min. insert is 70mm)Q:
saddle angle - if it's level then I only need the frame geometry, if not, then just let me know how much drop there is (-/+ mm of the saddle nose till it's level).
For all those measurments also some photos help. For example, if you aren't sure for the "X" measurment I only need to get one photo with your saddle position and with a ruler on the same photo..
Hope it helps, more informations on my personal email jureberk92(a)gmail.com, soon I'll have also a new email as soon as I get my own website...
Otherwise I can make more different saddle shapes, with custom carbon look (3K plain, UD or Twill), custom finish etc.,.. At this moment I can make a few different saddle shells, that are similar to (based on those saddles, but with a bit changed design that won't change the ride characteristics):
1) Selle Italia SLR c64
2) Tune Speedneedle
3) AX Phoenix
4) Selle San Marco Aspide
5) something similar to Fizik K:1 in process
On special request I can make also a new mould, but in that case I would need a saddle that I can get the measurments and make my own mould.
Price for any custom combo is 380€
Manufacturing time: usually around 10 days
Hope it helps a bit. I get a few questions and I hope that this answer helps. If there are some more just please let me know.
Regarding the price; that's the best I can offer. I do have to pay some taxes each month, and for my insurance etc., and this is the best I can offer. Also if I just cover my costs for each month I'll be happy. The more important thing to me is that I started with it, that I "break the ice" as we say in Slovenia, and hope that I'll get some interesting experiences for the future. Probably some though that it will be cheaper, or more expensive, but that's really the best that I can afford.
Back to the frame project - I almost finished PT5! Just some more fine sanding to do and it will be prepared for clearcoating. Hopefully till next weekend the frame will be already finished, I'll let you know
And here are some new pictures from my monocoque frame project, it's completely designed, hope you like it!
Next step - the moulds...I'll keep you updated!