Cannondale 2013 Lineup
Moderator: robbosmans
-
- Shop Owner
- Posts: 1980
- Joined: Sat Jun 13, 2009 4:02 am
- Location: NoVA/DC
The EVO Red Racing does come with the sisl2 cranks, without the spidering. Spidering will fit. They are generally available. I don't remember exactly, but I'm pretty sure the spidering MSRP is less than what cannondaleexperts lists them at.
Spidering will fit any Si crankarms.
Spidering will fit any Si crankarms.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Didnt realise it was backward compatible. No problem with my SiSl? Just remove the current spider and rings?
Anyone have a weight for just the Spidering?
Anyone have a weight for just the Spidering?
Looking at photos from Olympics and came across this frame again.
Absolutely love it! Anyone know if this getable?
Absolutely love it! Anyone know if this getable?
....also, doesn't nibali look good on a bike?!
-
- Posts: 24
- Joined: Mon Jan 07, 2013 2:56 pm
Maybe I missed it in the thread but does anyone know what color scheme comes with just the supersix frameset? If just getting frameset from lbs.
- Gearjunkie
- Posts: 877
- Joined: Tue Feb 19, 2008 5:17 am
- Location: NZ
Hi all.
I need some help.
I've signed up (in October last year) for an Evo Nano frameset in 56. Initially was delayed till December, then February and now April by the time they get down under.
Apparently some size 52 are here already, size 54 will be early March (they say) and 56 not till April.
Historically I've always ridden a 56 (Addict) but tested a 54 Evo (only issue was with overlap, otherwise loved it) and currently riding a Zero.7 in Large which has geometry closer to a 54 than a 56.
I have short legs and long body / arms.
I reckon I can fit either a 54 (110mm stem) or a 56 (100mm stem), there are pluses and minuses each way. The 54 pluses are that I should get it sooner (though that's not essential), I loved the way the demo handled, but it had toe overlap. The 56 will be what I've ridden with the Addict, won't have toe overlap (I do track stand at lights a lot) but I haven't (and can't) demo'd a 56 Evo so I'm worried the 56 won't be quite so "sharp" as the 54. I do prefer sharp handling.
What should I do?
Help appreciated.
Cheers
GJ
I need some help.
I've signed up (in October last year) for an Evo Nano frameset in 56. Initially was delayed till December, then February and now April by the time they get down under.
Apparently some size 52 are here already, size 54 will be early March (they say) and 56 not till April.
Historically I've always ridden a 56 (Addict) but tested a 54 Evo (only issue was with overlap, otherwise loved it) and currently riding a Zero.7 in Large which has geometry closer to a 54 than a 56.
I have short legs and long body / arms.
I reckon I can fit either a 54 (110mm stem) or a 56 (100mm stem), there are pluses and minuses each way. The 54 pluses are that I should get it sooner (though that's not essential), I loved the way the demo handled, but it had toe overlap. The 56 will be what I've ridden with the Addict, won't have toe overlap (I do track stand at lights a lot) but I haven't (and can't) demo'd a 56 Evo so I'm worried the 56 won't be quite so "sharp" as the 54. I do prefer sharp handling.
What should I do?
Help appreciated.
Cheers
GJ
Here is a data point regarding Evo HiMod frame weight for anyone interested. My bike came in with the FD mounting bracket slightly off location preventing the mechanic from getting the FD cage adjusted to his liking. So, Cannondale sent a new frame allowing me to easily get a weight for the naked frame except for derailleur hangars, of course. Here are the specs:
2013 Evo HiMod frame for Dura Ace di2
52cm
No seat post clamp
No cage bolts
Front and Rear Derailleur hangers included
Leader pull cord for rear brake cable in place
740 grams
If the weight of the front and rear hangers are taken out, it appears to come in pretty much in line with the marketing claims of 'sub 700g', although this is a small frame.
FWIW
2013 Evo HiMod frame for Dura Ace di2
52cm
No seat post clamp
No cage bolts
Front and Rear Derailleur hangers included
Leader pull cord for rear brake cable in place
740 grams
If the weight of the front and rear hangers are taken out, it appears to come in pretty much in line with the marketing claims of 'sub 700g', although this is a small frame.
FWIW
My rides:
2006 Look 555 Ultegra
2006 Felt B2 Dura Ace
2013 Cannondale Evo HiMod Dura Ace di2
2006 Look 555 Ultegra
2006 Felt B2 Dura Ace
2013 Cannondale Evo HiMod Dura Ace di2
thechemist wrote:Maybe I missed it in the thread but does anyone know what color scheme comes with just the supersix frameset? If just getting frameset from lbs.
2013 frameset
or
It's online again:The Machinist
My CAAD10:http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=109014
My CAAD10:http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=109014
I prefer it to the lime green one.RobH wrote:KAOS Cycles in Melbourne has the stars & stripes frame hanging in the shop, it looks very cool
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Couldn't find this in the 2013 Cannondale thread- which colors does the CAAD10 Frameset come in when you order frameset only?