Lightweights running Dura Ace 9000/9070

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

tommyb

Post subject: Lightweights running Dura Ace 9000/9070

Posted: Tue Nov 13, 2012 8:37 pm

Joined: Wed Mar 08, 2006 7:50 pm
Posts: 441
Location: Bolton

Trying to find out if my LW Gen3's will be able to run a d/a 11 cassette, I know I'll need a new DT freehub (http://www.derks-wielersport.nl/dt-swis ... 04977.html) but what about re-dishing?? Obviously LW's can't be

I did ask the UK agent and this is his response..

Hi
Thanks for the enquiry. It may work, but we cannot guarantee it.

As you stated, it's impossible to re-dish a Lightweight wheel, and using a 11-speed DT Freehub body may work but leave the rear deraillieur perilously close the the spokes when used in the largest rear sprocket, in addition to the free hub ending 0.5mm 'off-centre'.
Let me know if you have any questions.

Regards,

Does this make sense to anyone/has anyone used 9000 with LW's yet?

Thanks in advance!

_________________
Team FB page
Team Leapfrog

Top

HammerTime2

Post subject: Re: Lightweights running Dura Ace 9000/9070

Posted: Tue Nov 13, 2012 10:10 pm

Joined: Thu May 04, 2006 4:43 pm
Posts: 4548
Location: Wherever there's a mountain beckoning to be climbed

Read viewtopic.php?f=3&t=100549&start=90#p909815
and
viewtopic.php?f=3&t=100549&start=90#p909861

Top

sedluk

Post subject: Re: Lightweights running Dura Ace 9000/9070

Posted: Tue Nov 13, 2012 10:25 pm

Joined: Mon Sep 07, 2009 3:10 am
Posts: 327

So in summary, you buy the Shimano 11 DT Swiss hub body and cap. Replace the Hub Body/cap and go riding. Theoretically the wheel is now 131mm and the frame is made for a 130mm wheel so your wheel will be off center by 0.5mm. But in practice you will never know the difference and you just enjoy.

Top

upside

Post subject: Re: Lightweights running Dura Ace 9000/9070

Posted: Tue Nov 13, 2012 10:29 pm

Joined: Fri Mar 09, 2007 1:26 am
Posts: 325
Location: USA

I just installed the DT Swiss 11 speed cassette body with the 11 sp end cap. The wheel is out of dish by 3mm... this is on a Bontrager D3 tubular. It sounds like that any conversion is done that redishing is required. PITA

Top

Page 1 of 1

[ 4 posts ]

Board index » Discussion » Road

Who is online

Users browsing this forum: AGW, russianbear and 38 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

	Author	Replies	Views	Last post
Lightweights - Dura Ace 9000 compatible? [ Go to page: 1, 2 ] in Road	tommyb	18	2449	Sun Apr 14, 2013 12:51 pm BeeBee30
Dura Ace 9070 Di2 in Road	Horacio	3	1383	Fri Nov 30, 2012 7:56 am SvenNijs
Dura ace 9000 di2 vs Campy EPS [ Go to page: 1, 2 ] in Road	Ufgators	17	3945	Tue Sep 04, 2012 9:24 am thisisatest
Dura Ace 9000 hubs [ Go to page: 1, 2 ] in Road	upside	26	4576	Wed Feb 20, 2013 7:52 am eric01
Dura Ace 9000 FD compatibility [ Go to page: 1, 2, 3 ] in Road	TimmS	33	4323	Mon Mar 04, 2013 8:16 pm Berg