HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Articles FAQ Contact About




Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Mon Nov 05, 2012 3:55 am 
Offline

Joined: Fri May 27, 2011 4:48 am
Posts: 35
Hi, Just ordered a Ritchey P29er frameset and should arrive in another week. Sold my Merlin Ti, w/ Ritchey Logic rigid fork mountain bike in 2000, but presently into road (Cervelo R5, Moots Vamoots), and cyclocross racing (Ridley X-Night, X-Fire). When i mountain biked (circa 1992-2000) it was mostly long epic rides on single track trails and fireroads going forever that i enjoyed. Not interested in huge dropoffs or chucking your bike. Which brings me to Ritchey build. I wish to have a something of the past, but with all the new bling.
1. Rigid carbon fork; LBS have a Shimano Pro 29er, but is there another brand you would recommend.
2. Drivetrain; Shimano or SRAM? I run RED (road) Force (CX) , but not sure of anything in the mtn world.
3. Wheelsets; Would it be better to have a custom build or factory built?
4. Discs; best ones available
5. Tires; I used every tire back in my era. But, have no clue now. What happened to the green Michelin Wildgripper or white Onza Porcupines in white?
I am going with a flat bar and some small barends just like when i rode in Vail, SoCal, Moab, Boulder, Banff. Parts available in my garage are; DuraAce 7800 cranks 130mm 38/44 chainrings, Force RD, 970XTR pedals, Flite Ti saddle, Thompson Elite Seatpost (330mm, zero setback), Shimano 105 12-27 cassette...any thing from this bin worth using?
Thanks for your input.


Top
 Profile  
 
Posted: Mon Nov 05, 2012 3:55 am 


Top
  
 
PostPosted: Mon Nov 05, 2012 5:01 am 
Offline
Shop Owner
User avatar

Joined: Tue Mar 10, 2009 5:27 am
Posts: 1244
Location: McCall, ID
For the drive train, maybe take a look at the SRAM X0 or X9. The SRAM shifting seems to be a bit more crisp than the Shimano lineup. Concerning the wheels, going with a handbuilt setup can easily get you better value and higher quality than most factory built options.

_________________
http://www.zencyclery.com


Top
 Profile  
 
PostPosted: Mon Nov 05, 2012 5:47 am 
Offline

Joined: Sat Jun 06, 2009 7:28 am
Posts: 479
Disregard the above.

SRAM 10-speed stuff is far less crisp than shimano 10-speed.

I'm a SRAM 9-speed guy, but of 10-speed groups, shimano is far better build quality and feel. Shimano xt and xtr brakes in particular are more reliable than any of the offerings from SRAM.

As far as wheelsets, if just depends what your budget is. I really like shimano and mavic factory wheels for proper UST tubeless. Stans do some popular and light factory wheels also.

Otherwise, a stans or mavic rim laced to the hub of your choice is a good bet. I like Shimano XT and DT swiss 350s hubs, but you can get something blingy if you want.

The PRO carbon fork is nice, but ritchey do a similar one that'll match the bike better. White Brothers also do one. There are some monocoque rigid carbon forks available as well, from niner and Whisky Parts co.


Top
 Profile  
 
PostPosted: Mon Nov 05, 2012 3:46 pm 
Offline

Joined: Tue Dec 16, 2003 4:24 am
Posts: 945
I'd get a Ritchey/Syncros fork or a Niner.
Drivetrain? Shimano XT or XTR or maybe the new Sram XX1 but you'll need a special rear wheel for that.
I'd get the wheels built up locally with DT, King or XTR hubs. DT spokes. Mavic or Stans rims.
The best reviewed discs are XTR then XT then a big drop off. Don't buy any Sram discs, they all suck.
Tires? Conti Race King 2.2 or Schwalbe. You'll probably want to go tubeless. Ask local riders what they use.
New Ultimate flat bar with Ritchey WCS bar ends.
You can use your bin stuff (if they fit) but that would be a high gearing.


Top
 Profile  
 
PostPosted: Mon Nov 05, 2012 11:10 pm 
Offline

Joined: Thu Oct 13, 2011 5:25 pm
Posts: 158
I've been very pleased with my XX setup. I had some rear shifting trouble with it at first, but for the last year, it has been more reliable than anything else I've ever run. I think XTR shifts just as well. Don't think you can go wrong with any of shimano's nicer stuff. As far as sram goes, I would stick with X.0 or XX.

I think the magura MT8s are the highest performing brakes on the market right now: if you're concerned with weight and ultimate blingability. Otherwise, Shimano's XTRs are very, very nice, as well as XT and SLX, but you're paying a small weight penalty over the Maguras. Stopping power of either of these two will be comparable. The Formula R1s, in my opinion, have the potential to be the highest performing brakes out there, but rotor clearance is basically zero, so you will have a constant battle with pad rub. Hopes are reliable and well made, but stopping power versus weight is very poor. Avid's quality control is poor, and their design (taperbore) is flawed, though they can perform allright. I'd rock some X0 trails if they were given to me.

King hubs are reliable, fairly light, reliable, build stiff wheels due to their high flanges, reliable, have quick engagement, and are reliable. Some kings laced to arch rims would build a pretty stiff and light wheelset. 29er factory wheelsets have improved quite a bit: especially the nicer Mavic wheels, but the rims are narrow if you're into running wide, thin casing tires.


Top
 Profile  
 
PostPosted: Thu Nov 08, 2012 6:23 pm 
Offline

Joined: Thu Aug 30, 2012 8:42 pm
Posts: 94
My 2p worth.

SRAM Mech's bend really easily. I went through 3 this summer (and that was without wearing out a chain, that's how little the bike was used compared to the singlespeed!). Back on shimano and not bent it yet. Odly it always seemed to be the really chunky parralelogram section that bent, I think Shimano forge theirs rather than CNC, maybe that's the difference.

Rigid forks, see if you can track down a pair of forks off a Singular Swift. They're identical to the niner steel forks, but typicaly sell for £30-£40!

Brakes, shimano, relaible, cheep, very powerfull.

I'd always go handbuilt for offroad wheels, CBA with paying to have factory wheels rebuilt at a silly cost. Hope Hoops? Cheeper than King, and the only difference in bling levels is a percieved one due to the cost!


Top
 Profile  
 
PostPosted: Fri Nov 09, 2012 4:24 am 
Offline

Joined: Sat Jun 06, 2009 7:28 am
Posts: 479
FWIW I think that hubs are the least good way to spend money on a bike. Anything more than SLX/XT and you're just paying for bling.


Top
 Profile  
 
Posted: Fri Nov 09, 2012 4:24 am 


Top
  
 
PostPosted: Fri Nov 09, 2012 4:32 am 
Offline

Joined: Tue Dec 16, 2003 4:24 am
Posts: 945
and possibly longevity. My XT hubs are from 1997 and my Ultegra are 2000. DT, King, XTR will all last forever.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Build Advice

in MTB

robb

7

406

Thu May 15, 2014 10:55 pm

robb View the latest post

There are no new unread posts for this topic. My upcoming Bianchi Build. Any advice

in Introduce Yourself / Gallery - Please use metric weights.

GreenGoat93

6

1045

Tue Jul 15, 2014 9:03 am

GreenGoat93 View the latest post

There are no new unread posts for this topic. condor terra x build advice

in Cyclocross / Touring

Jamesclowes

2

388

Thu Jan 09, 2014 11:13 am

JackWalk View the latest post

There are no new unread posts for this topic. Ridley Heilium build advice sort

in Introduce Yourself / Gallery - Please use metric weights.

Clubagreenie

7

1447

Sun Oct 06, 2013 9:21 am

Clubagreenie View the latest post

There are no new unread posts for this topic. Wheel build /spoke count advice - Tune/IRD/CX ray

in Everything wheels

oldmuthariley

4

547

Sat Sep 07, 2013 10:47 pm

oldmuthariley View the latest post


It is currently Mon Jul 28, 2014 9:58 am

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB