Untitled by Harleyhoracio, on Flickr

Untitled by Harleyhoracio, on Flickr

Untitled by Harleyhoracio, on Flickr

Untitled by Harleyhoracio, on Flickr

Untitled by Harleyhoracio, on Flickr

Untitled by Harleyhoracio, on Flickr

Currently changing out the Rotor 3D+ crank for a THM Clavicula M3.
Also, the silver decal area on the top of the handlebar doesnt match the dark grey on the bike, so I'm in the process of getting that re-done.

That's way more fancy then mine!



Longer stem (Ritchy Carbon Matrix C260), cut the steer tube, wrap the bars.

In the long term, will probably swap the bars out for something shiny but still aluminum. I guess Ritchey wet black bars but they're pretty heavy. Just have black Rival brakes on there now. Might get something light like EE Brakes at some point. And a SRAM Red Quarq.

_________________
2013 Wilier Cento1 SR || 2009 Ridley Crossbow || 2011 Yeti AS-R 5 Carbon

Ritchey monocurve integrated stem/bar is really nice. I ordered one to check it out as an option.
Found it on sale for $350. It would look great on your bike opposed to mine.

I'm thinking of ordering one of these :
How tall is that headset upper bearing cover ? I am thinking I may also get the matching wilier plasma bars, but as they are 0 deg I'm wondering it I can get the right position.

Also - do the framesets come with all the parts necessary to flip between mechanical and electronic ? and a saw guide for the ISP ?

I can't get the measurement for you now, but all frames come ready for mechanical or electronic.
Those bars I posted I had custom done. I too was worried about the correct positioning with 0 deg, but it really is a non issue. We mocked it up and positioning felt fine...at least for me. I currently ride a Deda Element Zero 100 stem that has -6 and when I'm on the Wilier, the fitter said my positioning was the same as on my old bike. So I'm rolling with that.
No saw guide for the ISP is included. So measure with a micrometer, mark with chalk and cut with an axe!
As for the saga with 9070 Di2, word I got was Jan, so I'm going 9000 until the Di2 arrives, let the dust and prices settle a bit, then I will switch to Di2 and sell the 9000
stuff.

looking really nice. why not record eps if shimano isn't available? is it a spare wheels issue? i'd be just as happy ordering it once, and saving the hassle of selling DA mech for DI2.

Just my preference and really don't like the size of the brain on the EPS.

Just did a quick shakedown ride. Hope you're looking for a stiff and lively race bike Horacio! If so, you're in for a treat!

_________________
2013 Wilier Cento1 SR || 2009 Ridley Crossbow || 2011 Yeti AS-R 5 Carbon

Oh man, I'm jealous!
Can't wait!

I envy you both!

_________________
Current:
Project C6.0

On to a better life:
Felt AR FRD | Colnago C59 NERO | 2014 S-Works Tarmac | S-Works Venge | Wilier Cento Uno SL | Tarmac SL2

nice bikes guys - although I really think the Wilier graphics department are far from their previous best right now - lovely builds though.

_________________
Wiliers: Cento Uno; Cento SLR; Imperiale, Zero 7 (all Super Record 11sp naturally)

+1
Waiting for the outcome

_________________
My 6560gr TIME Skylon
My 9733gr COLNAGO Master X-light

Two super sexy frames there.
That green is stunning.

_________________
S-Works Venge

Posted some details here:
viewtopic.php?f=10&t=109085



Love the new graphics. They go well with the angular SR frames. Way more inspiring to me then the older stuff.

Opinions!

_________________
2013 Wilier Cento1 SR || 2009 Ridley Crossbow || 2011 Yeti AS-R 5 Carbon