S-Works Tarmac SL4 (2013)

Moderator: Moderator Team

Page 2 of 2

[ 27 posts ]

Go to page Previous  1, 2

Previous topic | Next topic

Author	Message
Wouter	Post subject: Re: S-Works Tarmac SL4 (2013) Posted: Thu Oct 25, 2012 3:44 pm
Joined: Wed Oct 24, 2012 12:02 pm Posts: 4	I am using a 110mm stem. 54cm should be ok. A 56cm frame ha a headtube of 170mm which is 15mm to high. On a 54cm frame I will use a 10mm spacer on top of the 8mm topcap. Thanks for your reply.
Top

Michel	Post subject: Re: S-Works Tarmac SL4 (2013) Posted: Thu Oct 25, 2012 9:55 pm
Joined: Tue May 11, 2010 7:43 pm Posts: 79	apLe wrote: How do you like the saddle? I chose SLR because I couldn't find Nago in decent price, but I still would like to try it! after a couple of rides, the nago seems to fit quite well. On my other bike I have a scratch nack.
Top

Weenie	Post subject: Re: S-Works Tarmac SL4 (2013) Posted: Thu Oct 25, 2012 9:55 pm
Top

mangkali	Post subject: Re: S-Works Tarmac SL4 (2013) Posted: Fri Oct 26, 2012 12:07 pm
Joined: Fri Oct 26, 2012 6:59 am Posts: 4	Michel wrote: here's my new one... Frame: S-Works Tarmac SL4 56cm Wheels: Enve 3.4 Chris King Groupset: Campa Super Record Crankset: Cannondale Hollowgram SL Seatpost: S-Works Stem/Handlebar: Zipp Service Course SL / Zipp Carbon SL TB Saddle: Prologo Nago Evo Nack Wheight: 6,28 Kg Yours look pretty trick as well!
Top

Valy	Post subject: Re: S-Works Tarmac SL4 (2013) Posted: Fri Oct 26, 2012 4:52 pm
Joined: Tue May 29, 2012 11:16 pm Posts: 125	Nice, looks a lot beastier than other SL4s I've seen. Go figure! :p _________________ London2Paris24 2014 Fundraising for Scope UK Facebook Page for more information and updates!
Top

YinYang	Post subject: Re: S-Works Tarmac SL4 (2013) Posted: Sat Oct 27, 2012 8:28 pm
Joined: Tue Dec 09, 2008 5:54 am Posts: 42	Michel, Was your previous bike a SL3? Would like to hear a ride comparison between the 2 frames.
Top

Michel	Post subject: S-Works Tarmac SL4 (2013) Posted: Sat Oct 27, 2012 8:56 pm
Joined: Tue May 11, 2010 7:43 pm Posts: 79	YinYang wrote: Michel, Was your previous bike a SL3? Would like to hear a ride comparison between the 2 frames. Yes, until I crashed it Sorry, can't say that much about it yet. Just had a short ride. My first impression is quite positive, although there's no big difference in ride quality in my opinion.
Top

YinYang	Post subject: Re: S-Works Tarmac SL4 (2013) Posted: Sat Oct 27, 2012 9:11 pm
Joined: Tue Dec 09, 2008 5:54 am Posts: 42	Suck to hear about your crash. Hope you are OK. I too have a SL3 and thinking about upgrading to a SL4 but not sure if there will be any significant difference.
Top

Michel	Post subject: S-Works Tarmac SL4 (2013) Posted: Sat Oct 27, 2012 10:25 pm
Joined: Tue May 11, 2010 7:43 pm Posts: 79	YinYang wrote: Suck to hear about your crash. Hope you are OK. I too have a SL3 and thinking about upgrading to a SL4 but not sure if there will be any significant difference. I'm ok, thanks. Not sure, if there's a big difference. Ok, its stiffer and lighter. But the Sl3 was already more than stiff enough. Saving some weight is nice. Everything else i'll see after a couple of more rides
Top

ressac	Post subject: Re: S-Works Tarmac SL4 (2013) Posted: Sun Oct 28, 2012 5:48 pm
Joined: Sun Oct 28, 2012 9:01 am Posts: 2	Is this http://zipp.com/bars/service-course-sl-bar/" onclick="window.open(this.href);return false; your handlebar? I'm gonna get one like that but I didn't have the chance to see it installed on a bike. Can you post a photo from the front?
Top

Michel	Post subject: S-Works Tarmac SL4 (2013) Posted: Sun Oct 28, 2012 7:44 pm
Joined: Tue May 11, 2010 7:43 pm Posts: 79	ressac wrote: Is this http://zipp.com/bars/service-course-sl-bar/" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false; your handlebar? I'm gonna get one like that but I didn't have the chance to see it installed on a bike. Can you post a photo from the front? No, its a Zipp Carbon SL TB bar. Sorry, don't have a picture of the front yet. Will post one the next days.
Top

ressac	Post subject: Re: S-Works Tarmac SL4 (2013) Posted: Sun Oct 28, 2012 8:30 pm
Joined: Sun Oct 28, 2012 9:01 am Posts: 2	Michel wrote: ressac wrote: Is this http://zipp.com/bars/service-course-sl-bar/" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false; your handlebar? I'm gonna get one like that but I didn't have the chance to see it installed on a bike. Can you post a photo from the front? No, its a Zipp Carbon SL TB bar. Sorry, don't have a picture of the front yet. Will post one the next days. Right, but I think both share the same geometry. Did you find it easy to become comfortable on that?
Top

Michel	Post subject: S-Works Tarmac SL4 (2013) Posted: Sun Oct 28, 2012 9:51 pm
Joined: Tue May 11, 2010 7:43 pm Posts: 79	ressac wrote: Michel wrote: ressac wrote: Is this http://zipp.com/bars/service-course-sl-bar/" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false; your handlebar? I'm gonna get one like that but I didn't have the chance to see it installed on a bike. Can you post a photo from the front? No, its a Zipp Carbon SL TB bar. Sorry, don't have a picture of the front yet. Will post one the next days. Right, but I think both share the same geometry. Did you find it easy to become comfortable on that? For me the Zipp sl fits perfectly. The Zipp replaced a deda campione, deda Zero 100 respectively. It felt very comfortable from the beginning.
Top

Display posts from previous: All posts1 day7 days2 weeks1 month3 months6 months1 year Sort by AuthorPost timeSubject AscendingDescending

Page 2 of 2

[ 27 posts ]

Go to page Previous  1, 2