Back by popular demand, the general all-things Road forum!
Moderator: robbosmans
-
RaceWareDirect
- in the industry
- Posts: 94
- Joined: Thu Apr 19, 2012 8:14 pm
- Location: Berkshire, England
by RaceWareDirect on Tue Oct 23, 2012 10:53 pm
Horacio wrote:I rode a double century a few weeks ago and I noticed a rider that had the FSA Plasma bar. He had his Garmin mounted out up front, so I asked he what mount he had. He told me it was a Bar Fly. He said there was just enough "give" to wrap it around the bar. I'm not sure he knew what he had because last I checked, that Bar Fly wasnt going around anything that wasnt round.
I have never tried our mounts around a none round bar but it maybe possible, the nylon does flex well so it could work. All of our mounts have the garmin sat inline with the bars rather than up on top so if it was one of ours that would be the biggest give away over a barfly mount that sits the Garmin much higher above the bars.
2011 Track Masters World Champion
Cervelo T3
Colnago CX-1
S works shiv
Specialized Tarmac SL5 Di2
Specialized epic comp
-
aerozy
- Posts: 776
- Joined: Thu Sep 04, 2008 9:48 am
- Location: Andaluzia, Spain
by aerozy on Wed Oct 24, 2012 12:44 pm
Just to say I was contacted by racewaredirect about my incident and have to say I'm pleased with the outcome.
They have promised to replace all my earlier mounts with the latest stronger version. I'm still of course upset about losing my edge 800 but It comes with the game as they say.
Factor O2 Rim / Winspace 1500 Disk / Yoeleo R6 Rim / Cervelo S2 Rim
-
RaceWareDirect
- in the industry
- Posts: 94
- Joined: Thu Apr 19, 2012 8:14 pm
- Location: Berkshire, England
by RaceWareDirect on Thu Oct 25, 2012 9:38 pm
ms6073 wrote:Horacio wrote:Are there any mounts available for the FSA Plasma bar? I'm not crazy about the FSA supplied mount.
Myself and a couple others have asked this same question and the guy from RWD has made a couple prototypes but as integrated bars are more of a niche market, there has not been much progress in the past month.
I have an update atlast for those of you who want an integrated mount. Please see attached pictures. It is now strong enough and works with a 500 on Cinelli RAM bars but yet to be tested on anything else. If anyone is interested I can post up a detailed dimensioned picture to see if it will fit specific bars.
Martyn
-
Attachments
-
2011 Track Masters World Champion
Cervelo T3
Colnago CX-1
S works shiv
Specialized Tarmac SL5 Di2
Specialized epic comp
-
RaceWareDirect
- in the industry
- Posts: 94
- Joined: Thu Apr 19, 2012 8:14 pm
- Location: Berkshire, England
by RaceWareDirect on Thu Oct 25, 2012 10:03 pm
aaric wrote:Martin - I'm interested please post dimensions
Please see below a few dimensions, if you need anymore then just say and I will add whatever you need.
Martyn
-
Attachments
-
-
2011 Track Masters World Champion
Cervelo T3
Colnago CX-1
S works shiv
Specialized Tarmac SL5 Di2
Specialized epic comp
-
RaceWareDirect
- in the industry
- Posts: 94
- Joined: Thu Apr 19, 2012 8:14 pm
- Location: Berkshire, England
by RaceWareDirect on Thu Oct 25, 2012 10:16 pm
aaric wrote:Thanks. What is the offset of the top of the garmin mount from the top of the mounting bar?
That offset is 8mm
2011 Track Masters World Champion
Cervelo T3
Colnago CX-1
S works shiv
Specialized Tarmac SL5 Di2
Specialized epic comp
-
Horacio
- Posts: 214
- Joined: Sat Jan 21, 2012 5:28 am
-
RaceWareDirect
- in the industry
- Posts: 94
- Joined: Thu Apr 19, 2012 8:14 pm
- Location: Berkshire, England
by RaceWareDirect on Fri Oct 26, 2012 7:15 am
aaric wrote:Ok. How do I go about getting the integrated mount into my hands - and how much?
If any of you would like to buy one then please email me direct at
sales@racewaredirect.co.uk so I can discuss your order and make sure it will work with your set up. They will not be on the website until I have tested a few other bars out to check how universal the fitting is.
Regards,
Martyn
2011 Track Masters World Champion
Cervelo T3
Colnago CX-1
S works shiv
Specialized Tarmac SL5 Di2
Specialized epic comp
-
ms6073
- Posts: 4291
- Joined: Fri Jul 23, 2004 8:24 pm
- Location: Houston, Texas
by ms6073 on Thu Nov 01, 2012 8:36 pm
RaceWareDirect wrote:Please see below a few dimensions, if you need anymore then just say and I will add whatever you need.
Martin, well I am definitely interested.
- Michael
"People should stop expecting normal from me... seriously, we all know it's never going to happen"
-
RaceWareDirect
- in the industry
- Posts: 94
- Joined: Thu Apr 19, 2012 8:14 pm
- Location: Berkshire, England
by RaceWareDirect on Thu Nov 01, 2012 11:45 pm
Anyone fancy a mount in Neon colours?
It took a while but finally found a way to get a proper neon finish.
-
Attachments
-
2011 Track Masters World Champion
Cervelo T3
Colnago CX-1
S works shiv
Specialized Tarmac SL5 Di2
Specialized epic comp