Hi guys,
Im looking for a single speed commuter (Melbourne is flat) to complement my main bike - probably throw on some olds Boras and put an Enve cockpit up there. Need something light and stiff, probably carbon and not too expensive for the frame set (say $1800 max). I was looking at the BMC track machine a few years ago but its out of production. Cant find anything on the Pinarello XTRACK although i like the geo. Any roadies out there with internal brake routing? I know pretty much anything could be used here but im chasing something with that halfway track geo, nice and aggressive but without a BB so low i cant turn.

Best I know with holes for brakes is the Specialized Langster (non pro version). http://www.specialized.com/au/gb/bikes/road/langster/langster#specs

But, you would have to buy the whole bike to get the frame.

Unless your thinking single speed without brakes, in which case the frameset only pro version would work.

Lightest open-mould carbon you can find that fits you, BB30 + Beer Components Eccentric BB converter and you're set. Plenty with internal routing as well so you can keep it clean. You can even ask for your frame to not have a front derailleur hanger if you want the "ultra clean" look.

Very Affordable + chain-adjustable + light + 130mm rear spacing. Done. The frameset will probably cost you no more than $700 delivered. Keep the rest of your $1100 for something else (or better: add it to your savings).

That's pretty much the best answer you'll find considering your components in waiting and goals.

_________________
Exp001
Selling: DMT Prisma 2.0 Shoes

Run a chinese generic t.t. carbon frame......$700 ish....have horizontal dropouts on many....have nice internal routing for brakes and handle OK (only). I have a FM018 that I quite like (Dengfu). Alibaba to go look.

_________________
Used to race....got too wrinkly and old Updated: Racing again! Thought this was unlikely! Eventually, I may even have a decent race!

http://imgur.com/a/Z4DCL/ something like this perhaps?