my friends bike for the season is almost done - this was one of ben berdens bikes from a couple years ago. I don't think that the bars and stem are final, but i could be wrong.

incidentally, another friend of mine has the purple one that berden rode.

Updated my crossbike with Chorus groupset and Zonda wheels...

_________________
Slammed. Campy. Tubulars.

Nice, also thinking about updating my cx next year for Chorus. Is good mounting brakewirestop like that on the stem?

_________________
/jonas l
http://cerrol.wordpress.com (my cyclingblog)

2013 Felt Fx...I wish I knew had to post bigger pics

http://www.flickr.com/photos/88617415@N06/8084770736/

_________________
Genentech
A Member of the Roche Group

lol please excuse the instagram dividers, but here is my crux 52cm

pretty much setup as shown. nothing fancy really imho, just parts laying around that i wanted to use.

force group
red130 cranks
46/38
xxx seatpost
fizik arione cx
easton equipe bars
easton ea90 stem
crankbros eggbeaters
short avid ultimates
fulcrum 7s with mich mud 2s and mich jets
ceramic black box bb

weight is just under 18.5lbs with the fulcrum 7s. It rides nice and i like the frame. Glad i got it. I dont race cx much , but would like to try tubulars next year probably. Also please excuse the lack of 46x11 for pictures hah.

oh it has white lizard skin 1.8mm tape now. The sram tape (which i go with the bike and reused) was too firm =\

Nice crux! Looks the business

This is my rig, excuse the horrible bartape job...

The brake cable stopper in the stem works OK, just have to use as much toe-in in the pads as possible to stop brake judder...

_________________
Slammed. Campy. Tubulars.

That Shawver looks great! I'd love to do a custom steel cx frame.

_________________
Trek 5500 - 13.75lbs on a $1400 Budget
20 gram 1x10 chain guide

Finally took the CX bike I picked up just before my trip OS on its first jaunt along the Yarra river single tracks yesterday. Got a few odd looks from the MTB riders coming the other direction...

Stock 2010 Colnago World Cup except the Ultegra compact crank and Enduro Ceramic BB fitted by the previous owner.

Changes by me so far was to replace the saddle with an SLR, retape the bars and fit a longer stem.

Will look at rotating the bars down and drop some spacers.

_________________
http://climbinglama.blogspot.com.au

@commfire: SICK build! any spacers between bb and crank?will be putting a cannondale srm on my f1 frame and think it's a pretty tight fit.

The Shawver is killer.

Have to show my Cannondale SuperX before first race this weekend. 7kg

_________________
/jonas l
http://cerrol.wordpress.com (my cyclingblog)

Thanks Simon. It is a fun/fast bike. The cannondale crank does fit fairly snug on the frame. As far as I can tell no spacers used but I will admit my LBS installed it.
Be sure to post pics of your F1. Not enough of those on here. I was thinking that might be my next road frame