Torque Wrenches
Moderator: robbosmans
-
- Posts: 1629
- Joined: Fri Oct 28, 2011 3:25 am
- Location: United Kingdom of Great Britain and Northern Ireland
I am going to buy a 3/8" torque wrench for higher torque applications in the 30-50Nm range, ie. BB cups and cassette lockring.
Is a digital torque wrench worth the money? Any helpful comments appreciated.
Is a digital torque wrench worth the money? Any helpful comments appreciated.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 170
- Joined: Sat Jul 17, 2010 11:36 am
I guess it never hurts to have a more accurate read on torque specs, but for the components and torque values you're describing, I don't feel that a digital indicator is necessary. I've been using Park's torque wrenches for the application you specify, and there have been no problems in terms of component life or performance. Also, a more sophisticated gauge may not guarantee a better-calibrated, more accurate tool, just higher resolution of whatever value the gauge things the wrench is applying.
For really low values (e.g., Schmolke and Ax stuff with alloy/ti hardware, carbon bolts, nylon threads), I'd say get the most accurate tools available. The really low values tend to demand torque wrenches with smaller drive studs than the big iron used on BB's and the like.
-Tim
For really low values (e.g., Schmolke and Ax stuff with alloy/ti hardware, carbon bolts, nylon threads), I'd say get the most accurate tools available. The really low values tend to demand torque wrenches with smaller drive studs than the big iron used on BB's and the like.
-Tim
as above, wouldn't bother with digital readout
i use a sealey stw1011 for the big stuff, comes with a good storage box and calibration certificate...
http://www.toolbox.co.uk/sealey-stw1011 ... 526-106502
...just under 33 quid including delivery
i use a sealey stw1011 for the big stuff, comes with a good storage box and calibration certificate...
http://www.toolbox.co.uk/sealey-stw1011 ... 526-106502
...just under 33 quid including delivery
- michel2
- Posts: 1144
- Joined: Mon Jan 10, 2005 10:47 am
- Location: somewere floating between here and the other side
a digital torque wrench isnt more accurate. read the literature, torque wrenches need to be calibrated, most of the snap on tools are calibrated with in 4 precent, norbar wrenches seem to be calibrated with in 2 percent...has nothing to do with the method in which you read the wrench...
i would go with norbar, they are affordable accurate and very durable, i belive the syntace wrenches are made by them aswell.
cheers
i would go with norbar, they are affordable accurate and very durable, i belive the syntace wrenches are made by them aswell.
cheers
-
- Shop Owner
- Posts: 1980
- Joined: Sat Jun 13, 2009 4:02 am
- Location: NoVA/DC
Digital torque wrenches are not necessarily more accurate-correct. But not having to wind them back down (or suffer the consequences over the long term), the ability to use them on left-hand threads, and the generally wider range, are pretty compelling arguments. I also like that, regardless of what the tone is set to, you see the last max torque read on the screen.
I can understand for small alu bolts or carbon parts but do you really need torque wrench for cassette and BB cups?
- Spindoctor
- Posts: 109
- Joined: Wed Jun 27, 2012 8:56 am
I have a torque wrench, never use it. Always feels like tightening to within an inch of its life and way beyond what is necessary.
Wiliers: Cento Uno; Cento SLR; Imperiale, Zero 7 (all Super Record 11sp naturally)
-
- Posts: 367
- Joined: Tue Aug 30, 2011 2:08 am
- Location: Washington State and the Colorado Front Range.
Spindoctor wrote:I have a torque wrench, never use it. Always feels like tightening to within an inch of its life and way beyond what is necessary.
I understand where you're coming from. I'm very careful with my components and I find that using my torque wrench/torque keys to affix the stem plate always "prints" the heck out of whatever carbon bars I'm attaching if I use 5 n m. Still, I won't touch any of my carbon stuff without one. On a related note, how often do you folks get your wrenches recalibrated if at all?
Colnago e Campagnolo
Hi,
IIRC those are made by Wuerth.
Anyhow, as others said, digital readout capability is not necessary at all.
If you need to wrench carbon/carbon parts or carbon/metal use some carbon mounting paste. That way you do not need to be close to manufacturers allowed torque (-30%) and you do not stress parts as much.
Small screws (aluminium/ti mostly), BB cups and the like do benefit from more accurate torquing so that's where you'd want to use a torque wrench.
Ciao,
i would go with norbar, they are affordable accurate and very durable, i belive the syntace wrenches are made by them aswell.
IIRC those are made by Wuerth.
Anyhow, as others said, digital readout capability is not necessary at all.
If you need to wrench carbon/carbon parts or carbon/metal use some carbon mounting paste. That way you do not need to be close to manufacturers allowed torque (-30%) and you do not stress parts as much.
Small screws (aluminium/ti mostly), BB cups and the like do benefit from more accurate torquing so that's where you'd want to use a torque wrench.
Ciao,
Being a snob is an expensive hobby.
I can only imagine your bike, if you use such tools
Beam style torque wrenches are more accurate in use then click type torque wrenches. They also happen to often be quite a bit cheaper.
Click type wrenches are prone to over torque because you can easily continue tightening after click whereas beam type you are more accurately using the tool.
Click type wrenches are prone to over torque because you can easily continue tightening after click whereas beam type you are more accurately using the tool.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com