why not ? carbon wheels from china !?

[1415chris]

Bought my ones from X-Bike Equipment.
Very good contact, awaiting time 2-3 weeks, shipping china-uk 3 days!
Rims came with pads and nipple washers.

[voodoojar]

I've been using my commuter to test light weight parts. I have a couple of the rims below that have about 500 miles of the bumpiest roads in Atlanta and have survived so far.

[focuscarbon]

showdown where did you buy your rims from? sub 1100g for a 50mm set is awesome!What spokes and hubs are you using?

50mm foam-filled rims(320g+320g) and Powerway R13 hub(290g) and Sapim Race spokes(250g), 1180g in total, that's my wheelbuilding.....thanks.

[focuscarbon]

Did you happen to weigh the 20mm tubular rims separatly? I'm really starting to concider a set of 20mm tubulars + bikehubstore.com hubs and some cx-rays. And maybe a set of 88mm tubulars

the normal weight of 20mm tubular rims is 250g, and the foam-filled rims will be some lighter, around 220g.....

[voodoojar]

The Chinese rim maker I buy from is switching to 24mm and dumping the 20mm because of failure rate. the 24mm weight 230gram. I do not have pictures on a scale but I have 2 sets on the way.

[kimaswan]

Bought my ones from X-Bike Equipment.
Very good contact, awaiting time 2-3 weeks, shipping china-uk 3 days!
Rims came with pads and nipple washers.

Those are 50mm rims ?
A friend of mine ordered very light 50mm rims (310gr) and both had problems while lacing them. They seem to be not strong enough. What about yours if they are 50mm ?

[focuscarbon]

The Chinese rim maker I buy from is switching to 24mm and dumping the 20mm because of failure rate. the 24mm weight 230gram. I do not have pictures on a scale but I have 2 sets on the way.

As i know that just one factory have 24mm mould, maybe you bought from them...

[voodoojar]

The Chinese rim maker I buy from is switching to 24mm and dumping the 20mm because of failure rate. the 24mm weight 230gram. I do not have pictures on a scale but I have 2 sets on the way.

As i know that just one factory have 24mm mould, maybe you bought from them...

Yeah, it's the same one you buy from.

[eigner]

Hi I would just warn you against Yishun:

I have been dealing with Yishun for a two years now. And everything went fine until my last batch of wheels where there where several quality problems. I emailed Yishun about these issues and in the beginning they asked for photos, so I emailed photos and even a video.
After that I have heard nothing. Absolutely nothing. Its been a month now, and now I would just share my experience with Yishun.
DON'T SUPPORT THIS COMPANY WHO CLAIM TO GIVE 1 YEAR WARRANTY, BUT IGNORE YOU IF YOU EVER WANT TO MAKE USE OF THAT WARRANTY!

[CharlesM]

And there it is in a nutshell....

[Dammit]

Farsports sent me a warranty replacement pair of 50mm superlight tubular rims after the first pair had a braking track issue.

[gigantor7]

Just found these pictures of an x-section of reynolds' new rims. Very clean looking.

[eric]

Nice find. Interesting that they stuck with a V section rim rather than the new trendy U shape.