New Parlee Z1
Moderators: MrCurrieinahurry, maxim809, Moderator Team
-
- Posts: 55
- Joined: Thu Dec 02, 2010 4:55 am
^what you could do with the ENVE logo in the seat post is to get a red marker and trace over the white ENVE logo. You could paint over it with red paint too (if you have a steady hand or a friend who's good a painting).
That way you can match it with the Red Parlee frame logo before trying sanding down the seat post.
I've done it with things like carbon bottle cages with white logos. I traced over the logo with a yellow marker to "ghost logo" it and to match my yellow frame.
That way you can match it with the Red Parlee frame logo before trying sanding down the seat post.
I've done it with things like carbon bottle cages with white logos. I traced over the logo with a yellow marker to "ghost logo" it and to match my yellow frame.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Tinker, Taylor, Tart
- Posts: 2070
- Joined: Sat Nov 29, 2008 8:00 pm
- Location: Sydney, Aus.
I reckon just get the BB Zipp post to match - much easier than faffing around with the Enve one, and the Zipp post is every bit as nice.
The BB finish is a nice contrast to the matte frame finish too.
The BB finish is a nice contrast to the matte frame finish too.
runningDoc wrote:^what you could do with the ENVE logo in the seat post is to get a red marker and trace over the white ENVE logo. You could paint over it with red paint too (if you have a steady hand or a friend who's good a painting).
If you mask the post well, painting is not that hard
-
- Posts: 1426
- Joined: Sat Oct 10, 2009 7:13 am
- Location: 90039
I'll take the post for $5 USD, shipped. Make it happen
I think it would be fairly easy to black out the logos, or even easier just to remove them.
The Zipp stem looks a lot better.
I think it would be fairly easy to black out the logos, or even easier just to remove them.
The Zipp stem looks a lot better.
tonytourist wrote:I'll take the post for $5 USD, shipped. Make it happen
After my LA trip, I think I'm broke! $5 ain't gona help much
I've tried acetone on the ENVE logos, but to no avail..
-
- Posts: 314
- Joined: Tue Nov 02, 2010 12:13 am
RippedUp wrote:Here goes, with BB Zipp Stem and K-Edge mount.
Is it very cold in your apartment?
Your stem looks a bit... withered.
-
- Posts: 292
- Joined: Sun Jul 10, 2011 9:03 am
What's the finish on those tubes? Is it clear coat or raw?
I really like that business like look.
I really like that business like look.
r o y g b i v
BobSantini wrote:What's the finish on those tubes? Is it clear coat or raw?
I really like that business like look.
Waxed finish. Thanks
-
- Posts: 292
- Joined: Sun Jul 10, 2011 9:03 am
RippedUp wrote:BobSantini wrote:What's the finish on those tubes? Is it clear coat or raw?
I really like that business like look.
Waxed finish. Thanks
That's raw carbon with auto wax?
r o y g b i v
BobSantini wrote:That's raw carbon with auto wax?
There is a wax finish at Parlee. It is one of the finishing options you can choose from.
Weight with Enve 1.25 tubulars is 6.2 Kg. Or 13.6 lbs.
-
- Posts: 5
- Joined: Tue Oct 16, 2012 11:55 pm
- Location: England
- Contact:
Absolutely gorgeous build and the wax finish is lovely im sure that will fly uphill.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com