Gap inside stem to fork, steerer tube
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
As long as the steerer is higher than the top bolt on the clamp (back of the stem) then I would ride it with a bung like this that sits at the top of the steerer.
Ideally the steerer should be cut above the stem with a spacer on top imo.
Also don't expect the fork manufacturer to sign off on using a fork with the steerer cut below the stem unless it's Cannondale, and in that case don't expect them to sign off on using a fork with a steerer cut above the stem.
Ideally the steerer should be cut above the stem with a spacer on top imo.
Also don't expect the fork manufacturer to sign off on using a fork with the steerer cut below the stem unless it's Cannondale, and in that case don't expect them to sign off on using a fork with a steerer cut above the stem.