Whats your favorite bike wheel skewer?

Discuss light weight issues concerning road bikes & parts.
LionelB
Posts: 1441
Joined: Sun Oct 05, 2008 8:09 pm
Location: Aix en Provence

by LionelB

none of these lightweight skewers work with horizontal dropouts.

by Weenie


BobSantini
Posts: 292
Joined: Sun Jul 10, 2011 9:03 am

by BobSantini

^^ Do you mean they don't clamp hard enough to stop the axle twisting in the dropout?
r o y g b i v

LionelB
Posts: 1441
Joined: Sun Oct 05, 2008 8:09 pm
Location: Aix en Provence

by LionelB

BobSantini wrote:^^ Do you mean they don't clamp hard enough to stop the axle twisting in the dropout?

Exactly. With horizontal dropouts your best bet is campy or shimano or something that has an equivalent clamping force.

deluxerider
Posts: 33
Joined: Thu Dec 06, 2007 11:32 pm
Location: Denver, CO

by deluxerider

Dura-Ace skewers are the best. Period. Easy to use and very secure.

socratease
Posts: 169
Joined: Thu Oct 13, 2011 5:25 pm

by socratease

I'm a big fan of shimano's skewers myself. On the road bike, which has semi-horizontal dropouts, the open-cam skewers I had didn't keep the wheel from sliding forward under hard accelerations.

On the mountain side of things, I had problems with my salsa skewer (one with relatively high clamping force) with my rear wheel coming out of the dropout when landing or crashing a particular way while navigating off-camber sections. On the mountain, it is possible to load the rear wheel pretty hard. Also, bear in mind, the clamping force listed is the vector normal to the plane of a dropout's face. This force times the coefficient of friction is what will keep your wheel in, which according to the internet is around .3 (for anodized aluminum i.e. hub/skewer head). This has been solved moving to an XTR rear skewer.

artray
Posts: 1365
Joined: Fri Oct 07, 2011 2:08 pm

by artray

I use tune skyline . no issues.

RWeb
Posts: 2
Joined: Tue Sep 25, 2012 5:29 pm

by RWeb

I have been using "Control Tech Race" skewers (http://www.controltechbikes.com/english ... kewers.php" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;) for 15 years (since 1997) on my Merlin mountain bike. Hubs are Chris King, and wheels are Mavic 517s. I have never had any problems. They have worked flawlessly. I have ridden that bike quite hard, hitting rocks big enough to give me a few flat spots on the rims. They have never come loose. They weigh just under 50 grams.

Last year I bought another set for my first road bike, a Serotta Ottrott with Mavic R-Sys SL wheels. Again they have been functioning perfectly. Two months ago, I replaced my road bike with a Storck Fascenario, with Reynolds 32 carbon tubular wheels on Tune hubs (front: Mig 70; rear: Mag 180). The spacing on the rear wheel is slightly larger with about 3 mm of the nut threads exposed, so I am going to replace them with the 135 mm rear skewer (spec'ed for MTB use) and go with the "Control Tech Race Light" skewers (http://www.controltechbikes.com/english ... kewers.php" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;) which are a claimed weight of 26 grams. The difference between the "Control Tech Race Light" and the "Control Tech Race" skewers is the scandium nut and end cap. I'm confident they'll function as well as the "Race" skewers.
Last edited by RWeb on Mon Nov 28, 2016 7:43 am, edited 1 time in total.

User avatar
Calnago
Posts: 5660
Joined: Sun Nov 07, 2010 9:14 pm

by Calnago

Campy skewers on Campy hubs/wheels, and Shimano skewers on Shimano hubs/wheels. They've got it right.

I have some wheels with DT Swiss 190 hubs and have the DT Swiss RWS ratcheting skewers on them (the steel version as I avoid Ti skewers completely). But though they seem to work well, they completely defeat the purpose of a "quick release" since you have to essentially ratchet (screw) them on. I prefer the standard cam open/close type much better for function.
Colnago C64 - The Naked Build; Colnago C60 - PR99; Trek Koppenberg - Where Emonda and Domane Meet;
Unlinked Builds (searchable): Colnago C59 - 5 Years Later; Trek Emonda SL Campagnolo SR; Special Colnago EPQ

headwind816
Posts: 335
Joined: Mon Mar 12, 2012 4:43 pm

by headwind816

I am a big fan of Salsa Ti skewers.

justkeepedaling
Posts: 1340
Joined: Thu Jan 03, 2008 6:14 am
Location: by Crystal Springs (Sawyer Creek Trail)

by justkeepedaling

Dura Ace skewers. Reliable, and clamp perfectly

ttts2
Posts: 31
Joined: Wed Jan 06, 2010 8:50 pm

by ttts2

Dura ace or other level shimano skewer. Look good, clamp firmly and reliably. Ideal in my opinion.

teddysaur
Posts: 119
Joined: Tue Jan 10, 2006 4:28 am

by teddysaur

I use the one that comes with my Shimano RS80 wheelset, Ultegra. It should be much cheaper than DA and have similar functionality with small weight penalty.

stephenjames
Posts: 68
Joined: Thu Sep 23, 2010 1:44 pm

by stephenjames

Tune!

User avatar
Powerful Pete
Moderator
Posts: 4004
Joined: Fri Dec 10, 2004 10:22 am
Location: Lima, Peru and occasionally in the Washington DC area.
Contact:

by Powerful Pete

Campagnolo! Since 1927, the original. :mrgreen:
Road bike: Cervelo R3, Campagnolo Chorus/Record mix...
Supercommuter: Jamis Renegade...pastatrails.blogspot.com
And you can call me Macktastik Honey Pete Kicks, thank you.

by Weenie


fdegrove
Tubbie Guru
Posts: 5851
Joined: Tue May 03, 2005 2:20 am
Location: Belgium

by fdegrove

Hi,

ROTFLMAO. :lol: Brilliant.

These were driving the man "nuts" :

Image

Ciao, ;)
Being a snob is an expensive hobby.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post