I'm considering fitting the new SRAM XX 1x11 drivetrain to my Santa Cruz Blur XC when it is released in October. I have Tune hubs, but so far only SRAM, DT Swiss and Mavic have committed to the new freehub body required. Is Tune manufacturing a compatible freehub body, or do any of the others listed fit a Tune hub?

I have heard that Extralite is working on a new hub body to be compatible with the XX1 cassette, you may want to contact Tune to see of they are planning the same.

Extralite:
http://www.lightbike-magazine.es/index.php?option=com_k2&view=item&id=776:gui%C3%B1o-de-extralite-al-nuevo-sram-xx1&Itemid=46

Hope:
http://www.vitalmtb.com/photos/features/New-Mountain-Bike-Components-at-Eurobike-2012,4252/2013-Hope-XD-Freehub-for-SRAM-XX1,41913/bturman,109

News about tune freebub for XX1 ?

Thanks

_________________
Blog Cannondale: https://www.facebook.com/BlogCannondale
Twitter: http://twitter.com/#!/Blog_Cannondale

Not heard anything about Tune. Send them a mail and ask?

For information, i asked American Classic, and they will release a XX1-body in february 2013.

Yes, I heard that too.



A friend asks Tune 1 week ago but still no answer...

_________________
Blog Cannondale: https://www.facebook.com/BlogCannondale
Twitter: http://twitter.com/#!/Blog_Cannondale

Asked Tune this morning and also got an answer within an hour.

"we are planning a XX-1 body for spring 2013"

So i think that is good news!

And FRM made XX1 standard crank

Alexandra Engen uses tune-hubs and xx1.

Are you sure? I know she had a XX-crank & chainring at the WC-Eliminator, but the rest of the driveline seems to be 10 spd XX/X0 with a X0 Type 2 RD. But if you seen her on the XX1-cassette with a Tune-hub, then it's only good news.



Sorry for the big picture!

I hope Tune custom the hub body for XX1, or we will have to change the rear hub to put XX1 on the bike.