Vakker sykkel! If I had access to Canyon in the US, I would have that same frame next to my CAAD. Beautiful. Let us know how it rides when you get some good km's on it.

_________________
"Let's plunge ourselves into the roar of time, the whirl of accident; may pain and pleasure, success and failure, shift as they will -- it's only action that can make a man."

Nice bike! How tall are u? Must be like 6"3..... 191cm....

Seriously, it's the most disappointing thing that they don't sell these here. I would be riding one right now

very cool machine...

wow, that is one sweet ride

_________________
Apparently my bikes were talking the other day & are undecided whether to upgrade the current rider or get a new one...

one of the schemers...

Hi,

Lovely bike! So lovely I have just bought a Canyon Ultimate AL frameset myself - it's in the post as I write. I'm a bit unsure about how to set up the internal cables for the front and read derailleurs. Did you run cable housing right down to where the cables exit in the bottom bracket - or did you cut the cable housing so that only a little bit went into the frame and the bare cables ran down to the exit?

No housings of any kind inside the frame - only the cable itself runs through the frame. However I used the "liners"/plastic tubes that were already fed through the frame to pull the cables through the frame - all in all very painless and easy. I've kept the liners/plastic tubes for later when I have to change a cable and I can use them again. I set it up with Jagwire cables and housings and they've performed perfectly so far.

_________________
12 Canyon Aeroad CF 9.0 ETE
12 Canyon Ultimate AL
11 Cervélo P2

Replaced the 7800 crankset with a 7900.

_________________
12 Canyon Aeroad CF 9.0 ETE
12 Canyon Ultimate AL
11 Cervélo P2

Updates: DA7900 crankset, Bar Fly by Abovecategorycycling, Veloflex Carbon tubulars, removed decals from Mavic CCUs. No weight yet, I'll wait for it to dry after a proper cleaning

And I forgot; Mavic's titanium freehub body - real weenie part there!

Now I just need to replace the 105 cassette with something slightly lighter!

_________________
12 Canyon Aeroad CF 9.0 ETE
12 Canyon Ultimate AL
11 Cervélo P2

That's really nice, and it's now built up almost exactly how I have my Z5 SL. Given the size (mine is 54) and price difference for the frame I'm very impressed.

Just a question about when you received the frame, was the steerer tube cut?
How much extra steerer was there for adjustment?

Cheers

My Ultimate CF came pre cut and I think Canyon allow 15mm of adjustment on the Ultimate framesets, one 10mm and one 5mm spacer. It may be that if you had a specific requirement for more height you could contact Canyon and see if they can cut the fork less.

djm, weight of the bike?

_________________
EX Colnago C50
TREK Madone 5.9 SL #7

Not sure!

..and I just remounted my SRM which came back from service.. adds a couple of hundred grams I guess. And it's back on my training wheels. No races to use the CCUs in this weekend.

tarz: mattyb95 is on the money. You can always ask Canyon, but I don't think they will be able to give you a longer steerer tube, but who knows.

mrfish: Thanks!

_________________
12 Canyon Aeroad CF 9.0 ETE
12 Canyon Ultimate AL
11 Cervélo P2

Which do you ride more: this or aeroad ete? How do you compare rides?

_________________
"Smart may have the answers, but stupid have all the interesting questions."