3T Ergonova Pro 'stripes' - how to change?

[giant man]

hi - does anyone know - or has changed - the white stripe on their Ergonova pro alloy stem and handlebars to a different colour?

It can't be that hard I guess, but what's the best - and most pro looking method? thanks ....

[mrfish]

Option 1: Remove with acetone. You may want to mask off the rest of the bar if you want to keep the lettering.

Option 2: Use white stripe as primer. Lay down two strips of masking tape to mask off rest of bar and spray paint it.

[PSM]

I taped the stem exept from the white stripe and removed the white paint with acetone. Looks good.

[HarryS]

Be careful with the acetone...Not only does it remove the white logos but it also dulls and wears the black base finish as well. Theres a greyish patch on my 3T stem that annoys the hell out of me because of this.