Non Shimano Di2 Cranks
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- Stolichnaya
- Posts: 2621
- Joined: Wed Oct 06, 2004 6:55 pm
- Location: Vienna, AUT
The Shimano cranks are pretty nice, and there is nothing about them that makes them Di2 specific.
You can pretty much use all of those suggested, but many here would take great umbrage at you mounting Campy or SRAM cranks on a Shimano bike. If you have BB30 or other standards that can use an adaptor, then the Cannondale cranks might be nice if the budget allows, along with some of the other aftermarket cranks (plenty of threads on those).
You can pretty much use all of those suggested, but many here would take great umbrage at you mounting Campy or SRAM cranks on a Shimano bike. If you have BB30 or other standards that can use an adaptor, then the Cannondale cranks might be nice if the budget allows, along with some of the other aftermarket cranks (plenty of threads on those).
-
- Posts: 3262
- Joined: Wed Mar 17, 2004 1:38 pm
The line given by Shimano for using their cranks and rings is that the three dimensional construction of their DA rings makes them stiff enough to resist the forces imposed by DI2 front shifting. Apparently there were some broken 7800 rings during the time they were field testing the DI2 systems, before they had developed the 7900 chain ring design.
Other rings may indeed be stiff enough to resist the forces of DI2, though not as stiff as the DA rings. It sounds like you've decided that the non Shimano options are stiff enough for you, though.
Take it as you will.
Other rings may indeed be stiff enough to resist the forces of DI2, though not as stiff as the DA rings. It sounds like you've decided that the non Shimano options are stiff enough for you, though.
Take it as you will.
Last edited by BdaGhisallo on Tue Sep 04, 2012 3:24 pm, edited 1 time in total.
-
- Posts: 382
- Joined: Mon Nov 15, 2010 7:58 am
I run THM's M3 with Praxis ring and have no shifting issues.
Rotor 3D with Stronglight CT2... shifts like a dream.
I am converting to Red Exogram (keeping the CT2's). To avoid the combination of Shimano and Sram on the same build, I will sand them down, and keep them in nude carbon.
As said prior, there are lots of threads regarding these issues.
I am converting to Red Exogram (keeping the CT2's). To avoid the combination of Shimano and Sram on the same build, I will sand them down, and keep them in nude carbon.
As said prior, there are lots of threads regarding these issues.
2012 Canyon Aeroad CF 8.0 Di2
2014 Canyon Ultimate CF SLX Di2
2014 Canyon Ultimate CF SLX Di2
Yes you are right there are plenty of posts about the topic but many conflicting views, hard to know what to believe
I'm trying to sort through these to find the truth
- the da 7900 crankset is specifically designed due to the tremendous forces that the FD servo generates. Not many others can cope with the stress
- the spacing between the chainrings is unique to da and using other cranksets with a different gap will result in the auto trimming not working as intended
I am not worried with mixing and matching, i've never really loved the look of the stock da crankset. I also run a bike with campy sr which i really like the performance of and look of and if they worked I would definitely try them but I can not find anyone who has used this combination successfully.
I am interested to see what the alternatives are...
I'm trying to sort through these to find the truth
- the da 7900 crankset is specifically designed due to the tremendous forces that the FD servo generates. Not many others can cope with the stress
- the spacing between the chainrings is unique to da and using other cranksets with a different gap will result in the auto trimming not working as intended
I am not worried with mixing and matching, i've never really loved the look of the stock da crankset. I also run a bike with campy sr which i really like the performance of and look of and if they worked I would definitely try them but I can not find anyone who has used this combination successfully.
I am interested to see what the alternatives are...
-
- Posts: 829
- Joined: Tue Jan 13, 2009 2:35 am
How much stress can that little FD motor really create? It's about the same size motor as you would find in a $10 toy car.
I have a hard time believing that motor puts more stress on the rings than a sprint would. I think that is just some marketing BS Shimano came up with to encourage people to buy Shimano cranks.
OP, personally, I don't like mixing Campy/Sram/Shimano, but I am very OCD - My closet is organized by type of clothing and color. But that doesn't mean you couldn't use FSA, Rotor or any of the lightweight options out there.
I have a hard time believing that motor puts more stress on the rings than a sprint would. I think that is just some marketing BS Shimano came up with to encourage people to buy Shimano cranks.
OP, personally, I don't like mixing Campy/Sram/Shimano, but I am very OCD - My closet is organized by type of clothing and color. But that doesn't mean you couldn't use FSA, Rotor or any of the lightweight options out there.
I agree that the amount off stress that di-2 puts on the rings isn't that muchs bigger that a manual FD.
I us a compact Rotor with Rotor chainrings combined with di-2 on a Cervelo R5 and everything works fine and with zero problems so far (10k miles)
I us a compact Rotor with Rotor chainrings combined with di-2 on a Cervelo R5 and everything works fine and with zero problems so far (10k miles)
- dadoflam08
- Posts: 951
- Joined: Wed Feb 13, 2008 11:25 am
- Location: Southern Great Southern Land
Have used both Zipp Vumaquads and also Ax Lightness Morpheus with Stronglight CT2 rings (and also the carbon DA cranks with the CT2 rings) - all worked well with Di2 - CT2 rings seem to work particularly well.
'83 De Rosa+'11 Baum Corretto+'08 BMC Pro Machine >6kg+'86 Pinarello Team +'72 Cinelli SC +'58 Bianchi+'71 Cinelli SC+'78 Masi GC+'83 La Redoute Motobecane+'94 Banesto Pegoretti+'88 Bianchi X4 +'48 Super Elliott+'99 Look Kg281+'18 Pegoretti
Spent last year on Rotor 3D+ and Q-rings with Di2 drivetrain. no probs at all.
You would be absolutely floored at how powerful that Di2 stepper motor is! When activated against an unpedalled crank, the rings visibly deflect. If you accidentally caught your finger in there, it would shear your finger off. Small children need to be warned never to play with a Di2 bike, as that could be a real tragedy. My four-year-old would do that, until a dramatic demonstration with a pencil... When working on your Di2 front, unplug it.
Back to the shifting, Di2 will work with any ring, but due to the power of the thing, it is best with Dura-Ace 7900 rings. The spacing of the rings is optimized for Shimano, as it is factory pre-set for sweep. Campagnolo ring spacing is very slightly different and I have never tried a Campagnolo crank on Di2. Most other cranks use Shimano ring spacing, so you should be good there.
Back to the shifting, Di2 will work with any ring, but due to the power of the thing, it is best with Dura-Ace 7900 rings. The spacing of the rings is optimized for Shimano, as it is factory pre-set for sweep. Campagnolo ring spacing is very slightly different and I have never tried a Campagnolo crank on Di2. Most other cranks use Shimano ring spacing, so you should be good there.
-
- Posts: 2594
- Joined: Mon Jan 21, 2008 12:09 pm
I am using 1990s vintage Sweet Wings cranks with CT2 chainrings... shifting is great.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Geoff wrote:The spacing of the rings is optimized for Shimano, as it is factory pre-set for sweep. Campagnolo ring spacing is very slightly different and I have never tried a Campagnolo crank on Di2. Most other cranks use Shimano ring spacing, so you should be good there.
Isn't this what the high and low trim setscrews are for on the FD? I assume you can use it with any spacing you want on any double chainring crank.