Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Fri Jul 29, 2016 3:17 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Sat Aug 25, 2012 2:47 am 
Offline

Joined: Thu Aug 12, 2010 3:01 pm
Posts: 38
Time for new Wippermann Connex links for my Campy 10 speed system. When last I purchased some there were two for 10 speeds: one marked "10 speed" and one marked "10S1." The 10S1 was best for UN chains. In searching for new links I only see one model offered and the description says it works with all 10 speed systems. Does anyone know if there now is just the single model?


Top
   
PostPosted: Sat Aug 25, 2012 2:52 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
campy's 10sp chain used to be wider than shimano/sram's 10sp chains. then campy came out with their "ultra narrow" 10sp chains, which ran quieter. theyre all practically the same width now. so theres only one 10sp link.


Top
   
PostPosted: Sat Aug 25, 2012 6:33 pm 
Offline

Joined: Fri Mar 24, 2006 1:26 pm
Posts: 2529
While all modern 10 speed chains are now the same 5.9mm in width across the outside, they are not all the same width across the inner plates, so mixing brands of chains and master links will yield different amounts of side clearance.

Shimano, KMC and Wipperman all have about the same width across the inner plates, the last time I measured them, while SRAM and Campy were both about .1mm narrower.

Using a Wipperman connex link with the narrower chain brands will produce more side clearance than the other links on the chain. There is only one width of 10 speed connex link in current production.


Top
   
PostPosted: Sat Aug 25, 2012 7:21 pm 
Offline

Joined: Thu Aug 12, 2010 3:01 pm
Posts: 38
is the current link the narrower of the two that were offered previously...the one i am using now works fine with my Campy chain


Top
   
PostPosted: Sat Aug 25, 2012 9:39 pm 
Offline

Joined: Fri Mar 24, 2006 1:26 pm
Posts: 2529
goldmine848 wrote:
is the current link the narrower of the two that were offered previously...the one i am using now works fine with my Campy chain


No, since Wipperman, Shimano and KMC are the wider models, it means that Wipperman no longer makes the narrower version that they use to refer to as "Shimano compatible".

The SRAM link should be the narrowest, but it always pays to measure, since manufacturers may make changes without notice.

I like to see a side clearance in the .004-.008 inch or .1-.2mm range and use feeler gages to check.


Top
   
PostPosted: Sun Aug 26, 2012 12:05 am 
Offline

Joined: Thu Aug 12, 2010 3:01 pm
Posts: 38
Well I just looked at the box and it says they are 6.1mm. They seem to work fine with the Campy chain.


Top
   
PostPosted: Sun Aug 26, 2012 2:10 pm 
Offline

Joined: Fri Mar 24, 2006 1:26 pm
Posts: 2529
You must have bought new-old-stock chains. Wipperman hasn;t made 6.1mm width chains for quite a few years.

http://www.connexchain.com/Bicycle-chai ... 1_326.html


Top
   
PostPosted: Sun Aug 26, 2012 2:21 pm 
Offline

Joined: Thu Aug 12, 2010 3:01 pm
Posts: 38
sorry for the confusion...I meant that the Connex links are 6.1 and I am using them with current Campy chains


Top
   
PostPosted: Sun Aug 26, 2012 9:28 pm 
Offline

Joined: Mon Jul 31, 2006 6:49 pm
Posts: 448
i used shiomano 10 speed model with great success


Top
   
PostPosted: Sun Aug 26, 2012 11:01 pm 
Offline

Joined: Fri Jan 27, 2006 1:38 pm
Posts: 677
Location: Greater Pittsburgh
Skip the Wippermann and get a KMC instead... works much better.

_________________
"Suddenly the thought struck me; my floor is someone elses ceiling" - Nils Ferlin


Top
   
PostPosted: Sun Aug 26, 2012 11:15 pm 
Offline

Joined: Fri Mar 24, 2006 1:26 pm
Posts: 2529
I've always found the wipperman link to work well and it's the easiest to remove. You just have to remember to install it in the correct direction. The KMC link does not remove as easily and some are not recommended for reuse. I figure that as long as the link has some snap left to it, when reconnected, it's probably OK to reuse.

IRD makes links for 10 and 11 speed that have a similar shape to the wipperman.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 11 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Adding a KMC Missing Link to a Campy chain

in Road

BigPoser

9

438

Sun Jul 03, 2016 1:29 am

bikerjulio View the latest post

There are no new unread posts for this topic. 10 Speed Campy

in Road

wpccrunner

5

451

Tue Sep 15, 2015 6:36 am

vejnemojnen View the latest post

There are no new unread posts for this topic. original 11 speed Campy shifts work with my Record 11 14?

in Road

rossjm11

1

443

Wed Aug 26, 2015 8:27 pm

MartyW View the latest post

There are no new unread posts for this topic. Campy Bora Ultra 50 / Fulcrum Racing Speed spokes/nipples

in Road

clm2206

6

465

Thu Apr 21, 2016 2:55 am

em3 View the latest post

There are no new unread posts for this topic. Brake squeal slowing down from higher speed, but works fine with slower speed.

in Road

stockae92

2

162

Mon Jun 27, 2016 5:40 pm

Calnago View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], MSNbot Media, peted76 and 30 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited