For MTB wheelset

Looking for durability and "stiffnes"

DT240 are very good
Are White Industries same or better?

_________________
http://kavitec.blogspot.com/

click this! http://www.youtube.com/watch?v=jqfFdCWAH5I&list=UUEtgd6K9EDGmoSE2YYipQgQ&index=20

Not sure dt swiss will build into the stiffest wheels out there...

_________________
2013 rocky mountain vertex 29er
­Twitter
www.cyclingtrainingnuts.blogspot.ca

I have had two sets of 240s both laced to Stans rims.
As most people will tell you, they have been very reliable and servicing them is so easy.

_________________
"Stay cool and try to survive" A. Klier to the other members of the Garmin classics squad the night before P-R.

I would say go with the White Industries. The DTs are overpriced and really aren't too special considering. The Whites are just as durable as the DTs yet they are easier to service and quite a bit cheaper.

_________________
http://www.zencyclery.com

http://www.wheelbuilder.org

Not getting into the ''stiffest hub'' debate

Dt Swiss come in black only and White Industries in black or silver. Fine if you like the options.

White Industries front hub = 199g. That is unfortunate or a brick in other words. Rear is 306g but you want the most reliabilty from the rear. That is what gives trouble most of the time.

So I would go for something light(cheap or expensive) at the front and figure out something good for the rear. Perhaps Chris King if you want reliable.

Chris.

_________________
MSC Koncept Carbon Di2 - 6955g
Leichtkraft Team Carbon - 6868g.

wheelset for Eliminator race style. White industry so. they also look much better from DT swiss.

_________________
http://kavitec.blogspot.com/

click this! http://www.youtube.com/watch?v=jqfFdCWAH5I&list=UUEtgd6K9EDGmoSE2YYipQgQ&index=20

chris king is pretty expensive

_________________
http://kavitec.blogspot.com/

click this! http://www.youtube.com/watch?v=jqfFdCWAH5I&list=UUEtgd6K9EDGmoSE2YYipQgQ&index=20

I have had 4 sets of White Industries already and no regrets about it.

However if you are counting grams, don't trust the claimed weight on WI website.

Here are my rear hub weights:-

313gms (Titanium freehub)
316gms (Titanium freehub)
333gms (Normal freehub)
334gms (Normal freehub)


I agree with krzysiekmz that the front is a brick and because of this, I have bought & used the Hope Pro II Evo hub for the front. Cheaper & lighter.

_________________
Please visit my blogs:-

I'm a MILF - er blog (Help raise awareness!) http://firespitter38.blogspot.com

True tales from the dark side http://truetalesfromthedarkside.blogspot.com