New Giant Propel
Moderator: robbosmans
Heard from my LBS Giant is coming out with an aero frame.
Anyone heard any chatter about this?
Was thinking really hard about purchasing the TCR Advanced SL 0, but now I must pause.
Another hold up for me is waiting for 11 speed and revamped Di2.
Anyone heard any chatter about this?
Was thinking really hard about purchasing the TCR Advanced SL 0, but now I must pause.
Another hold up for me is waiting for 11 speed and revamped Di2.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Spoke to the Rabo mechanics and some of the ex-Rabo pros that have been testing it. I think they were still debating on the brake placement (I would bet it'll be madone style give the close giant-shimano connection). They were really quite positive about it, but they do seem to be a bit late to the game now so it'd better be special.
-
- Posts: 172
- Joined: Fri Apr 18, 2008 12:55 am
The giant in the picture has a pretty aero looking junction around the seat clamp/seat stay rear wheel area. It reminds me a lot of the Felt DA junction. Rear brake is maybe set in the frame a little ala the fuji TT bikes...?
-
- Posts: 57
- Joined: Wed Aug 08, 2012 5:54 pm
While the picture is pretty terrible it is still fairly informative;
The frame is has a flat top tube in order to maintain the orientation with the flow.
The rear seat stays consist of a UCI legal aero section that terminates in a way fairly similar to the Trinity.
The rear brake has not been hidden under the BB so it will be more flexible with regards to what brakes can be used.
Looking at the fork, they have either fattened up the airfoil section quite a bit (not terribly likely) or since the brake pads on the front are extending behind the fork, it is in fact an integrated front brake.
And now for some conjectures;
Depending on how the rear stays are formed into seat tube, it could shield the rear brake fairly well and effectively extend the airfoil section.
Looking at how the riders (Theo Bos?) leg is obscured by the seat mast, they will be using a slightly thinner section airfoil or a unique aero section. By looking at the downtube where we can tell how narrow the downtube is by comparing the bottle and what we can see from where the frame member overlaps it's own shadow. By using comparative scaling in the picture and the fact that UCI likes the 3:1 ratio and most manufacturers push the 3:1 rule, then the down tube is about 1.75"x.58" in the perpendicular cross section if they are using a true airfoil shape. However, since a tube shape like that would be very flexy we can assuem that they are using some sort of a different truncated airfoil or similar solution.
Also what race was that screenshot from?
The frame is has a flat top tube in order to maintain the orientation with the flow.
The rear seat stays consist of a UCI legal aero section that terminates in a way fairly similar to the Trinity.
The rear brake has not been hidden under the BB so it will be more flexible with regards to what brakes can be used.
Looking at the fork, they have either fattened up the airfoil section quite a bit (not terribly likely) or since the brake pads on the front are extending behind the fork, it is in fact an integrated front brake.
And now for some conjectures;
Depending on how the rear stays are formed into seat tube, it could shield the rear brake fairly well and effectively extend the airfoil section.
Looking at how the riders (Theo Bos?) leg is obscured by the seat mast, they will be using a slightly thinner section airfoil or a unique aero section. By looking at the downtube where we can tell how narrow the downtube is by comparing the bottle and what we can see from where the frame member overlaps it's own shadow. By using comparative scaling in the picture and the fact that UCI likes the 3:1 ratio and most manufacturers push the 3:1 rule, then the down tube is about 1.75"x.58" in the perpendicular cross section if they are using a true airfoil shape. However, since a tube shape like that would be very flexy we can assuem that they are using some sort of a different truncated airfoil or similar solution.
Also what race was that screenshot from?
Eneco Tour, 1st stage.
Ive been told that the Giant aero frame wasnt approved on time by UCI for the Tour and just got approved recently (that's why its used on a race otherwise it cannot!).
Ive been told that the Giant aero frame wasnt approved on time by UCI for the Tour and just got approved recently (that's why its used on a race otherwise it cannot!).
-
- Posts: 849
- Joined: Sat May 12, 2012 8:32 am
- Location: Australia
I've heard that it will be called the "Propel Advanced sl" not sure how much truth there is to that though
I write the weightweenies blog, hope you like it
Disclosure: I'm sponsored by Velocite, but I do give my honest opinion about them (I'm endorsed to race their bikes, not say nice things about them)
Disclosure: I'm sponsored by Velocite, but I do give my honest opinion about them (I'm endorsed to race their bikes, not say nice things about them)
Not in the 2013 catalog yet
http://www.giant-bicycles.com/en-us/bike-index/?collections_id=9&preview=true
http://www.giant-bicycles.com/en-us/bike-index/?collections_id=9&preview=true
euan wrote:The Propel got UCI approval on the 12th of June.
Then they had plenty of time for using it at le Tour.
-
- Posts: 191
- Joined: Thu Sep 17, 2009 5:38 pm
Heard this will be released in January. Not sure if that means it will be available though.
- lancejohnson
- Posts: 2831
- Joined: Sat Apr 16, 2005 6:08 pm
- Location: Boulder, Colorado
- Contact:
can anyone find any additional images?
___________________________________________________
"Organization is for the simple-minded, the Genius controls the chaos." - Jens
"Organization is for the simple-minded, the Genius controls the chaos." - Jens
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com