Hi there!

Thought it was time to introduce my ride. Thinking of removing the Edge decals or swap them for a set of black ones.
Other then that I'm pretty happy with my ride so far. Haven't got the opportunity to see her on a scale yet.

Hope you like it

Cheers from Sweden!


Frame: Cannondale SuperSix HiMod -54
Group: SRAM Red
Brakes: Ciamillo ZeroGravity
Cables: Gore

Wheels: Edge 1.65 w DT 240 hubs and Sapim CX-Ray spokes
Tires: Vittoria EVO CX front, Schwalbe Ultremo HT rear

Bars: Zipp Service Course SL Short & Shallow 44 cm
Stem: Pro Vibe, Cavendish 120mm
Bar Tape: Pro Gel

Bottle Cage: Elite Custom Race
Saddle: Fizik Arione CX Braided
Seat Post: Ritchey WCS Carbon
Seat Post Clamp: No clue
Pedals: Speedplay Zero Stainless

Greetings That is a very well put together ride and makes me want to own a Cannondale some day. Very nice part selection and aesthetics. Personally, I like the EDGE stickers on the wheels but could go either way, with or without.

_________________
My Bikes:
BMC SLR01 TeamMachine
Cannondale CAAD8

I usually hate decals on wheels except white decals on a black w/white logo frame. Looks awesome. All you need to do is anodize your crank arms and you will be all set

Nice c'dale. For me I'd remove the decals on the wheels and change the stem. But it looks awesome as it is .

_________________
Caad9 BBQ Durace7800 build
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=82445#p721875

Very nice Dale!! Personally I would go black Edge stickers but the white ones work with that paint scheme.

_________________
Gaulzetti Cabron Disc = (pending)
Ridley X-Night Disc = 7.80 kg
Goto Bikes 29er = (SS conversion in process)

Sold
Ridley Noah FAST = 6.86
Ridley Fenix = 6.74
Raligh HiLife = 7.46
Fuji SST = 7.34
Van Dessel FTB = 7.58

Great build that I'm sure leaves nothing to be desired. The Cannondale b/w paint job got to be the best monochromatic one out there, and the wheels are a perfect match.

From an aesthetic point of view black cranks arms and maybe a more subtle stem might round off the looks.

_________________
Bikes: Raw Ti, 650b flatbar CX

Thanks guys!

I removed the decals today, looks way better imo.

Do you work in a distribution center for hockey equipment?

_________________
Exp001 || TeamLACBC

Heard about "HockeyMonkey"?

I think there is four stores in the US.

There's only one in Europe (Södertälje, Sweden) and I'm pretty sure it's the
biggest of all available ice hockey stores in Europe.

Nice work... Looks fantastic

_________________
Caad9 BBQ Durace7800 build
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=82445#p721875

I kinda liked it with the stickers...

_________________

Looks even better without the stickers, but it was already nice apart from the sloping saddle. I especially like that chunky stem, but I think it would look even better with a spacer that's the same width as the frame. The transition would then look less pronounced than with the conical spacer. I had some spacers made for my Super6 and then promptly lost them.

Now you're styling.. looks much nicer without the decals. Just my two cents.

Very lovely build and it was a good choice to take the decals of the wheels. It's a much cleaner look and not so busy anymore. I have to agree with some of the other , I'm not a big fan if the stem since I don't like bigger stems in general. One more suggestion would be to get a different looking spacer under the stem.
Still, this is a beautiful ride as is.
Great job!!!

_________________
Pfeiffer's Rennrad Camp and USA Cycling Certified Coach
Independent HED Wheel Dealer

I replaced my white decals with some outline cut vinyl decals in black I got custom made..
Heaps less busy but still keeping it real.
The wheels need something other wise they may as well be chinese carbon which edge/enve wheels are not.

_________________
Skunkworks Bikes