Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sun Dec 11, 2016 11:27 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 12 posts ] 
Author Message
PostPosted: Mon Aug 13, 2012 7:02 pm 
Offline

Joined: Tue Sep 08, 2009 10:12 pm
Posts: 561
Folks, I'm having problems with my Garmin sensor reading the magnet within my Lightweight Standard 111 wheels. I understand it's a bit hit and miss. Sadly, the Garmin magnet doesn't fit the Lightweight carbon spoke as it's too flat.

I see Mavic do a magnet which has been designed for their flat carbon spokes. I just wondered if it fits the Lightweight spokes. Here is the link

http://www.chainreactioncycles.com/Mode ... tedKingdom

Thanks for the feedback


Top
   
Posted: Mon Aug 13, 2012 7:02 pm 


Top
   
 
PostPosted: Mon Aug 13, 2012 7:46 pm 
Offline

Joined: Fri Dec 24, 2010 9:37 pm
Posts: 956
Location: it's raining, it must be uk
look on ebay for neodymium magnets, i use 5x5x2mm ones, 5mm diameter x 2mm will be ok too, maybe even smaller

you can get a pack of 50 for less than the price of one mavic

tape or glue one magnet to the spoke - i use a small strip of 3m's kapton tape, the silicone adhesive won't harm cf expoxy and is impervious to water

this is light and unobtrusive, you will also have lots of spare magnets


Top
   
PostPosted: Mon Aug 13, 2012 8:42 pm 
Offline

Joined: Wed Oct 29, 2008 7:55 pm
Posts: 232
Location: Finland
Lightweights should have magnet laminated inside the rim, both fron and rear. Look for small dekal on nds.
How old are your wheels? I think they added magnet to 2009--> models


Top
   
PostPosted: Mon Aug 13, 2012 9:22 pm 
Offline

Joined: Thu Apr 01, 2010 10:24 am
Posts: 599
Turbo, he says he's having trouble getting the sensor to pick up the magnet inside the rim on his Lightweights.

I'd follow sungod's advice and try do a nice neat job!


Top
   
PostPosted: Mon Aug 13, 2012 11:37 pm 
Offline

Joined: Mon Nov 15, 2010 7:58 am
Posts: 380
I have a tune micro magnet on my Zipps. I superglued it to spoke and picks up sensor. Fairwheel bike sells them.


Top
   
PostPosted: Tue Aug 14, 2012 1:23 am 
Offline

Joined: Mon Sep 07, 2009 3:10 am
Posts: 406
Just make sure to glue the magnet to the spoke. Never clamp a magnet to your carbon spoke.


Top
   
PostPosted: Tue Aug 14, 2012 1:47 am 
Offline
User avatar

Joined: Thu May 04, 2006 4:43 pm
Posts: 5375
Location: Wherever there's a mountain beckoning to be climbed
coppercook62 wrote:
I have a tune micro magnet on my Zipps. I superglued it to spoke and picks up sensor. Fairwheel bike sells them.
I believe you are referring to the Tune Pulsar Spoke Magnet, which is undoubtedly a Neodymium Iron Boron magnet, commonly known as a Neodymium magnet, and is what all "Neodymium" magnets are.


Top
   
PostPosted: Tue Aug 14, 2012 1:55 am 
Offline

Joined: Tue Nov 29, 2011 10:07 pm
Posts: 70
On my mad fibers they included a tiny magnet they included s a tiny glue dot to keep it moving


Top
   
PostPosted: Wed Aug 15, 2012 1:50 pm 
Offline

Joined: Sat Dec 13, 2003 2:25 am
Posts: 4774
Location: Canada
No, don't glue the magnet to the spoke on a LW wheel. The only reason that magnets have been historically on the spoke is that, with box-sectioned rims, the spoke was the only rational place to put it. With the advent of deep(ish) wheels (45mm and deeper), the obvious place to put the magnet is on the rim.

I run rear-wheel speed. A rare-earth magnet (like this: http://www.leevalley.com/en/wood/page.a ... 2065&cat=1) glued to the rim makes for a very reliable speed sensor and a more solid placement than a spoke. Also, you can run a bigger, 1/2" x 1/8" magnet...


Top
   
PostPosted: Mon Sep 03, 2012 8:58 am 
Offline

Joined: Wed Aug 11, 2010 7:52 am
Posts: 70
Can anyone who has a set of Lightweight wheels and garmin edge with GSC 10 unit show us your solutions? I'm a little skeptical about gluing anything to the spoke/rim of a Lightweight wheelset. What exactly did you do and how did you do it? Pictures of your setup would be appreciated.

I have some Lightweight wheels coming in within the next few weeks and would like to find the best solution possible. I would like to continue using my garmin 800 with the magnet as I do a lot of riding under heavy tree cover. The GPS has a hard time finding a signal and without the magnet, I have a hard time knowing what speed I'm going.

One more thing, where did you source all of your parts for this project would also be greatly appreciated.

Cheers.


Top
   
PostPosted: Mon Sep 03, 2012 11:14 am 
Offline

Joined: Fri Jun 25, 2004 8:32 pm
Posts: 1367
Location: the Netherlands
Why not ask carbonsports? You don't want to void warranty by any glueing aktions.

I myself glued neodymium magnets on the spokes of numerous lightweight wheels which works perfect as long as you use a proper glue (a good 2 component epoxy would be fine) and not something called "superglue" (most are hydroscopic which mean thes attract water and will loose clamping power within a short timeperiod)


Top
   
Posted: Mon Sep 03, 2012 11:14 am 


Top
   
 
 Post subject:
PostPosted: Thu Sep 06, 2012 11:07 am 
Offline

Joined: Tue Apr 17, 2012 11:20 am
Posts: 325
.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 12 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Search: Lightweight wheel with broken spoke! To repair!

in Road

Carbonwork

0

457

Sat Apr 23, 2016 7:47 pm

Carbonwork View the latest post

There are no new unread posts for this topic. New Mavic CXR Elite Wheels

in Road

brianwchan

1

380

Wed Nov 09, 2016 2:15 am

pdlpsher1 View the latest post

There are no new unread posts for this topic. Roval Star Carbon Spoke Wrench

in Road

seahuston

1

478

Sat Dec 26, 2015 3:38 am

seahuston View the latest post

There are no new unread posts for this topic. New wheels - Enve or lightweight

[ Go to page: 1 2 3 4 5 6 ]

in Road

ebsilon

84

5094

Wed Feb 24, 2016 6:32 pm

jwfinesse View the latest post

There are no new unread posts for this topic. Roval CLX 32 vs. Mavic COSMIC PRO CARBON SL C

in Road

christofersmith

2

426

Wed Nov 02, 2016 5:04 am

thedonnydino View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], Google [Bot], olmostalegend, sugarkane, Yahoo [Bot] and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited