Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Thu Dec 14, 2017 6:16 pm

All times are UTC+01:00





Post new topic  Reply to topic  [ 12 posts ] 
Author Message
PostPosted: Mon Aug 13, 2012 7:02 pm 
Offline

Joined: Tue Sep 08, 2009 10:12 pm
Posts: 620
Folks, I'm having problems with my Garmin sensor reading the magnet within my Lightweight Standard 111 wheels. I understand it's a bit hit and miss. Sadly, the Garmin magnet doesn't fit the Lightweight carbon spoke as it's too flat.

I see Mavic do a magnet which has been designed for their flat carbon spokes. I just wondered if it fits the Lightweight spokes. Here is the link

http://www.chainreactioncycles.com/Mode ... tedKingdom

Thanks for the feedback


Top
   
Posted: Mon Aug 13, 2012 7:02 pm 


Top
   
 
PostPosted: Mon Aug 13, 2012 7:46 pm 
Offline

Joined: Fri Dec 24, 2010 9:37 pm
Posts: 1360
Location: it's raining, it must be uk
look on ebay for neodymium magnets, i use 5x5x2mm ones, 5mm diameter x 2mm will be ok too, maybe even smaller

you can get a pack of 50 for less than the price of one mavic

tape or glue one magnet to the spoke - i use a small strip of 3m's kapton tape, the silicone adhesive won't harm cf expoxy and is impervious to water

this is light and unobtrusive, you will also have lots of spare magnets


Top
   
PostPosted: Mon Aug 13, 2012 8:42 pm 
Offline

Joined: Wed Oct 29, 2008 7:55 pm
Posts: 361
Lightweights should have magnet laminated inside the rim, both fron and rear. Look for small dekal on nds.
How old are your wheels? I think they added magnet to 2009--> models


Top
   
PostPosted: Mon Aug 13, 2012 9:22 pm 
Offline

Joined: Thu Apr 01, 2010 10:24 am
Posts: 599
Turbo, he says he's having trouble getting the sensor to pick up the magnet inside the rim on his Lightweights.

I'd follow sungod's advice and try do a nice neat job!


Top
   
PostPosted: Mon Aug 13, 2012 11:37 pm 
Offline

Joined: Mon Nov 15, 2010 7:58 am
Posts: 383
I have a tune micro magnet on my Zipps. I superglued it to spoke and picks up sensor. Fairwheel bike sells them.


Top
   
PostPosted: Tue Aug 14, 2012 1:23 am 
Offline

Joined: Mon Sep 07, 2009 3:10 am
Posts: 408
Just make sure to glue the magnet to the spoke. Never clamp a magnet to your carbon spoke.


Top
   
PostPosted: Tue Aug 14, 2012 1:47 am 
Offline
User avatar

Joined: Thu May 04, 2006 4:43 pm
Posts: 5414
Location: Wherever there's a mountain beckoning to be climbed
coppercook62 wrote:
I have a tune micro magnet on my Zipps. I superglued it to spoke and picks up sensor. Fairwheel bike sells them.
I believe you are referring to the Tune Pulsar Spoke Magnet, which is undoubtedly a Neodymium Iron Boron magnet, commonly known as a Neodymium magnet, and is what all "Neodymium" magnets are.


Top
   
PostPosted: Tue Aug 14, 2012 1:55 am 
Offline

Joined: Tue Nov 29, 2011 10:07 pm
Posts: 70
On my mad fibers they included a tiny magnet they included s a tiny glue dot to keep it moving


Top
   
PostPosted: Wed Aug 15, 2012 1:50 pm 
Offline

Joined: Sat Dec 13, 2003 2:25 am
Posts: 4966
Location: Canada
No, don't glue the magnet to the spoke on a LW wheel. The only reason that magnets have been historically on the spoke is that, with box-sectioned rims, the spoke was the only rational place to put it. With the advent of deep(ish) wheels (45mm and deeper), the obvious place to put the magnet is on the rim.

I run rear-wheel speed. A rare-earth magnet (like this: http://www.leevalley.com/en/wood/page.a ... 2065&cat=1) glued to the rim makes for a very reliable speed sensor and a more solid placement than a spoke. Also, you can run a bigger, 1/2" x 1/8" magnet...


Top
   
PostPosted: Mon Sep 03, 2012 8:58 am 
Offline

Joined: Wed Aug 11, 2010 7:52 am
Posts: 83
Can anyone who has a set of Lightweight wheels and garmin edge with GSC 10 unit show us your solutions? I'm a little skeptical about gluing anything to the spoke/rim of a Lightweight wheelset. What exactly did you do and how did you do it? Pictures of your setup would be appreciated.

I have some Lightweight wheels coming in within the next few weeks and would like to find the best solution possible. I would like to continue using my garmin 800 with the magnet as I do a lot of riding under heavy tree cover. The GPS has a hard time finding a signal and without the magnet, I have a hard time knowing what speed I'm going.

One more thing, where did you source all of your parts for this project would also be greatly appreciated.

Cheers.


Top
   
PostPosted: Mon Sep 03, 2012 11:14 am 
Offline

Joined: Fri Jun 25, 2004 8:32 pm
Posts: 1386
Location: the Netherlands
Why not ask carbonsports? You don't want to void warranty by any glueing aktions.

I myself glued neodymium magnets on the spokes of numerous lightweight wheels which works perfect as long as you use a proper glue (a good 2 component epoxy would be fine) and not something called "superglue" (most are hydroscopic which mean thes attract water and will loose clamping power within a short timeperiod)


Top
   
 Post subject:
PostPosted: Thu Sep 06, 2012 11:07 am 
Offline

Joined: Tue Apr 17, 2012 11:20 am
Posts: 325
.


Top
   
 Post subject:
Posted: Thu Sep 06, 2012 11:07 am 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 12 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Mavic Cosmic Pro Carbon SL C wheels

in Road

micropox

8

2513

Wed Feb 15, 2017 2:38 pm

micropox View the latest post

There are no new unread posts for this topic. Mavic Cosmic pro carbon exalith

in Road

cho00010

4

2435

Tue May 23, 2017 5:02 pm

BanthaTrx View the latest post

There are no new unread posts for this topic. JRC lightweight carbon components

[ Go to page: 1 2 ]

in Road

sussexhills

15

1955

Wed Nov 22, 2017 9:22 am

Jenmoss View the latest post

There are no new unread posts for this topic. Carbon fiber spokes + Alloy Rim = DISASTER(for MAVIC users)

[ Go to page: 1 2 3 4 5 6 ]

in Road

ohhyeok90

80

5061

Thu Nov 16, 2017 9:57 pm

antonioiglesius View the latest post

There are no new unread posts for this topic. How to use a Pioneer power meter without a magnet

in Road

alastairb

10

906

Mon Jun 26, 2017 5:38 am

Darceking View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], FIJIGabe, Google Adsense [Bot], Shrike, Yahoo [Bot] and 38 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited