leosantos wrote:
love your bike for a few months now but only now had to post: isnt it a great thing to be able to lower your saddle, center of gravity, stem, cut some weight, look nicer, etc just because you swapped pedals/shoes?? also, how do you like the spindle being shorter? I personaly didnt.. I tried the 50mm spindle lenght but had to go back to the standard 53mm, since it did feel different, too narrow for me.
p.s. it is not only the sidi shoes and pedals that we use in commom.. I also have the very same (cheap, lets admit) hangging scale.. is your accurate at all? mine will vary 50gr in my bike´s weight every now and them!
Haha I got std axles. No point in messin with that. I do like that the sidi ergo3 speedplay shoes allowed me to lower my whole postion on the bike by 4mm. Thing is I already had a 10mm ultra lite spacer on my bike and while I have plenty of carbon headset spacers I had only the 3mm in the ultralight config so i had to take 7mm off the steerer tube instead of jUst 4..
Looks great though as there is only a 3mm spacer between topcap and stem now.
My scales read at least 20g heavy, they are not that accurate but they are consistent which is a start
.
So final specs...
2011 med parlee z5 custom finish
Campag 2012 super record shifters, mechs, chain and cassette
... Tuned with extralite jockey wheels, alloy and one nlyon bolt
THM m3 170mm crankset with
... compact spider, ceramic THM bb30 BB, praxis compact rings, extralite chainring bolts
2011 neg-g GSL brakes, evne pads in rear, cryo blue pads front. Tuned Ti pinch bolts
I-link brake housings, I-link mini shifter housings with DLC cables.
3t ergonova 40cm ltd bars
Extralite 90mm OC stem
Extralite topcap and expander
Emporelli Dolomiti cages with extralite bottle cage bolts
The 5g deda dog fang catcher
Lizards skin dps race tape
Speedplay zero peddles tuned with ward axels and dulight Ti butterfly's
MFCK black Ti seat post clamp
Extralite enve 45 tubby wheel set with veloflex extreme up front and conti comp in the back
... Ceramic upgrades and token y-cut carbon skewers
Berk mixed finish SLR combo
No steel bolts, a few Ti, alloy and nylons ones though.
5.30kgs
FAQ
Search
Login
Register
