look pedal - safe to use?
Moderator: Moderator Team
-
- Posts: 68
- Joined: Sun Sep 25, 2011 4:30 am
- Location: NYC
Hard to say, the pic is pretty dark. Is the plate just dented at the side or detached from the body? If its just dented, I would say it's not a biggie. If the plate is detaching, I would worry that the plate would come off completely eventually and block the mechanism so that you can't unclip.
The plate itself is just providing a stable (and durable, hence metal) platform that your cleat "stands" on.
The plate itself is just providing a stable (and durable, hence metal) platform that your cleat "stands" on.
-
- Best Freak bike poster
- Posts: 426
- Joined: Mon May 25, 2009 9:34 am
- Location: VIC, Australia
It's the wear plate. If you can clip in, the pedal is fine to use. You may notice a bit of play in your cleats and the pedals may not feel as solid as before.
If you plan on tapping it back into position, make sure you line up the metal to fit into the grooves exactly. I had to chuck my last pair of Keo Blades because I wasn't careful and bent it so I couldn't clip in. IMO it's the Keo Blades only weakness, Look should have designed the plate like the DA 7900 pedals, with the wear plate attached to the pedal body with screws:

Much more repairable, but I guess heavier.
If you plan on tapping it back into position, make sure you line up the metal to fit into the grooves exactly. I had to chuck my last pair of Keo Blades because I wasn't careful and bent it so I couldn't clip in. IMO it's the Keo Blades only weakness, Look should have designed the plate like the DA 7900 pedals, with the wear plate attached to the pedal body with screws:

Much more repairable, but I guess heavier.
-
- Posts: 161
- Joined: Sat Oct 04, 2008 5:14 pm
- Location: Portugal
The same happened to me and the pedal is fine. The metal plate was bent and was making an irritating noise while pedaling so I had to "compress" it with pliers. Try to do the same and if possible fit the border of the plate back into the groove in the pedal body.
- Spindoctor
- Posts: 111
- Joined: Wed Jun 27, 2012 8:56 am
get some new pedals cheapskate - hell... its an excuse to bike bit shop... what are you waiting for?
Wiliers: Cento Uno; Cento SLR; Imperiale, Zero 7 (all Super Record 11sp naturally)
-
- Similar Topics
- Replies
- Views
- Last post
-
- 19 Replies
- 1916 Views
-
Last post by Rick
Thu Nov 30, 2017 5:32 pm
-
-
Crack in back wheel at nipple. Is it still safe to use?
by VTR1000SP2 » Wed Jul 12, 2017 10:06 pm » in Everything wheels - 6 Replies
- 627 Views
-
Last post by glam2deaf
Thu Jul 13, 2017 12:34 pm
-
-
- 31 Replies
- 4633 Views
-
Last post by bikemaniack
Sat Jun 17, 2017 6:00 pm
-
-
Safe to use Zipp skewers on my Campy Bora Ultra 35 & 50's?
by Noctiluxx » Fri Dec 15, 2017 5:19 pm » in Everything wheels - 6 Replies
- 760 Views
-
Last post by TonyM
Thu Dec 21, 2017 5:40 am
-
-
- 3 Replies
- 879 Views
-
Last post by maddog 2
Fri Sep 15, 2017 9:56 am