hello, looking for a stem top cap that is flat, kind of like cannondale.
can some one point me in the right direction, cant seem to find anything online.

thx

Slam that stem dot com

_________________
2012 Fuji Altamira SE - 6.42kg

viewtopic.php?f=10&t=111416" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

Same as above, they just opened a webshop.

http://metallicpoutine.com/headset-bearing-covers/v-1-1/

_________________
--Max.

I don't think the OP meant a headset top cap? Have a look at the Syntace stem top cap, it's actually fairly flush with the stem, even if not completely. The Extralite top cap is pretty flush too.

_________________
Roadbike
Kinesis RaceLight T2

Mountainbike
Van Nicholas Zion Ti

Parts or Passion carbon top caps are flat

My bad misread that. I have a nice Carbon-Ti topcap which is flat. Very light.

_________________
--Max.

Purelycustom carbon top caps
Light. Flat. Cheap.

_________________
Exp001

Ooops......misread that. I would say that extralite, pop, far and near all have fairly flat "top caps".

_________________
2012 Fuji Altamira SE - 6.42kg

viewtopic.php?f=10&t=111416" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

Parts of Passion.

Parts Of Passion is the best choice. It's either in UD carbon or 3k weave. Perfectly flat on top, insane light.

Fibre Lyte also.

Extralite cap.. Very flat

Fiber lite cap.. Flat but it sits up real high. It's chunky and cheap looking..

_________________
http://fairwheelbikes.com/c/forums/topi ... parlee-z5/

Not meaning to highjack the thread but I've been looking for a flat top cap too but with no hole in the middle as I plan to use it with no expansion plug.

I just noticed my expansion plug on my cervelo weighs a ton. My canyon only has a "cap" which weighs about 3gr. This was ordered separately as Canyon usually leaves the top cap area open. I couldnt find anything on their site though. Maybe they dont sell them anymore.

On a normal headset after installing the stem you dont need the expansion plug there anyways. Seems like a good way to save weight.

So who makes a top cap (non expansion plug version) for a 1/8 fork?

_________________
Canyon Ultimate SLX 2013 + DA9070 + Red Quarq + Corima Aero+ MCC (Ordered! 6.0kg)
Canyon AeroRoad + DA9000 + Lightning Power2Max + MCU's (6.5kg)
Cervelo P4 + G3 Powertap (7.78kg)
Cervelo SLC + SRAM Red 2013 + Red Quarq (6.8kg)

Schmolke do one of these you need to measure id of internal fork column

_________________
Owl

I'm using a tune gum gum with parts of passion top cap. Works nicely and is relatively light.