Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Thu Aug 25, 2016 12:54 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062

All times are UTC+01:00

Post new topic  Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Mon Jul 16, 2012 12:46 pm 

Joined: Mon Jan 02, 2012 8:09 pm
Posts: 39
A discussion at Superweek yesterday and this question was posed!

Wheel A is 58mm deep and weights 1450 grams

Wheel B is 38mm deep and also weight 1450 grams.

Is rotational weight the same or is it easier to spin up the shallower wheel due to cutting through the wind on acceleration?

Does it make no difference as to depth if their the same weight?

It almost seems like its hard to start a sprint or acceleration on deeper wheels of the same weigh!

PostPosted: Mon Jul 16, 2012 12:58 pm 

Joined: Sun Mar 27, 2011 10:01 pm
Posts: 96
I would've thought that the deeper wheel is easier to spin since less of the weight is on the outer edge (hence less force required to rotate it). However, since the weight distribution is so small (12mm) the extra depth might be causing a drag effect that overpowers the beneficial effect from having the weight closer to the hub.

PostPosted: Mon Jul 16, 2012 1:02 pm 

Joined: Tue Apr 12, 2011 8:08 am
Posts: 2291
Location: Pedal Square
Not enough information to do the calculation, you need to know where the mass is. Imagine one wheel having internal nipples, then the spoke bed would be farther out, meaning more inertia.

Not that I think it would make a difference in real world.

Bikes: Raw Ti, 650b flatbar CX

PostPosted: Mon Jul 16, 2012 1:35 pm 

Joined: Tue Sep 14, 2010 3:28 pm
Posts: 1405
Rollers are the best way for someone to see for themselves how much impact wheel inertia is having on there accelerations. Try out a few different wheels using the same protocol, and then the next time wheel inertia comes up you'll find yourself doing :roll:

PostPosted: Tue Jul 17, 2012 2:35 am 
User avatar

Joined: Sun Sep 03, 2006 1:55 pm
Posts: 1838
Location: Western Australia
It's likely that the deeper wheel will have a lower moment of inertia. Wassertreter is 100% correct though. Not enough info.

However, the difference in practice would be so small and the aero advantage with a deeper set would be greater that the better choice really is the deeper set. All things considered, unless a shallower set is significantly lighter, aero is better.

Cyclist turned music producer

Visiting South West Australia? Visit Crank n' Cycles!

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Help! Wilier Zero7 vs. Cento1 SR - diff question than usual

in Road




Tue Aug 02, 2016 7:17 pm

mimason View the latest post

There are no new unread posts for this topic. Thoughts on rim depth and it's effect on handling?

in Road




Tue Jun 07, 2016 1:26 pm

campbellrae View the latest post

There are no new unread posts for this topic. On Rim Dimples, Active Turbulator Lips, Depth, Width - ??

in Road




Thu Mar 24, 2016 12:17 am

prendrefeu View the latest post

There are no new unread posts for this topic. Super Light weight Tires for clincher wheels.Continental GP Super Sonic 700x23 ???

[ Go to page: 1 2 ]

in Road




Fri Jul 01, 2016 4:28 pm

gerardk1111 View the latest post

There are no new unread posts for this topic. What's a good stem and handlebar weight? Decent Average weight ?

in Road




Thu Jul 28, 2016 7:49 am

Wingnut View the latest post

All times are UTC+01:00

Who is online

Users browsing this forum: benzebub, DOUG, Exabot [Bot], fabriciom, JamesGRC, mdeth1313, petal666 and 39 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited