I think we can do it once the THM cranks are on. The bike is being built with every part Madcow has at Fairwheel to get this thing under 10lbs. Really the only think not from fairwheel is the frame and fork !!

_________________
Wilier Zero.7 SR11 being built
2011 C59 Di2 AX SRT 24's, THM Calvica, Fibula
2010 RXR VIP @ Red RXR Sold
MY RXR VIP-> viewtopic.php?f=10&t=77056" onclick="window.open(this.href);return false;

Bike came in at 10.06 lbs. today with campy cables, SR11 cranks, and a 125g seat. We have about 300 or so grams to cut in the seat, cranks (once THM makes the bb386 evo kit).

No way I can get this below unless I make some crazy parts changes and that pushes me too far over the edge of a daily rider bike. I'd need 100 more grams, zipp SL-> Ax bar, -35g, extralite stem -> ax stem -23 grams, MCFK seat post -> Schmolke -25grams, seat collar stock -> tune - 16 grams. Bolt and sprocket swap out 15-20 grams total -114 grams or so.

This takes me to about max -414 grams but maybe more like 364 grams on the safe side.
Cost of about $ 1800 to shave 1 pound, and the weight limit of the parts.

A 10 pound bike is quite cool; a sub 10 bike is an achievement in engineering.

_________________
Wilier Zero.7 SR11 being built
2011 C59 Di2 AX SRT 24's, THM Calvica, Fibula
2010 RXR VIP @ Red RXR Sold
MY RXR VIP-> viewtopic.php?f=10&t=77056" onclick="window.open(this.href);return false;

link with photos viewtopic.php?f=10&t=102977

_________________
Wilier Zero.7 SR11 being built
2011 C59 Di2 AX SRT 24's, THM Calvica, Fibula
2010 RXR VIP @ Red RXR Sold
MY RXR VIP-> viewtopic.php?f=10&t=77056" onclick="window.open(this.href);return false;

Any update on the THM fitting?

I thought Wilier called it the zero.7 because the frame was below 0.7kg? Finally a manufacturer that's truthful about the weight

_________________
Apparently my bikes were talking the other day & are undecided whether to upgrade the current rider or get a new one...

one of the schemers...

Yes, had Two Hubs in Orange County CA make a custom BB and it works great.

A call to Fair Wheel bikes, and the unknown ETA of the kit forced me to let Two Hubs have a go at it. I think they did a great job. So it can be done, as more BB386 hit the market.

I have replaced the cables now, im on my third set and have to say, the THM FIBULA brakes make it very hard to use just one cable type. Powercordz are a no go. Campy was great, but heavy, nokion what a joke. You'll have to wait for photos to see what we found to work "best" for weight and the very tough cable routing on the zero.7. It was a super tight fit, and took great skill and a cool head to get it perfect, but once done the SR 11 was flawless .

This bike has now been the effort of 4 bike shops to get the final build. Photos to come after a good wash.

_________________
Wilier Zero.7 SR11 being built
2011 C59 Di2 AX SRT 24's, THM Calvica, Fibula
2010 RXR VIP @ Red RXR Sold
MY RXR VIP-> viewtopic.php?f=10&t=77056" onclick="window.open(this.href);return false;

totally

and i have a Zero 7 - there is no way SRAM comes close and the whole bike with Super Record and pedals weighs in at 6.3 kg - petting anything other than Campagnolo/FSA on it is sacrilege - besides it wont allow the 386 BB it was designed for, so you lose that advantage.

_________________
Wiliers: Cento Uno; Cento SLR; Imperiale, Zero 7 (all Super Record 11sp naturally)

I wonder how much more will the bike weight if it was to have the SR11 EPS system instead of the regular SR11?

They call it the Zero.7 because it's under 0.8kg. As in, it weighs 0.7xx kg. Original name was going to be Wilier 799, but they found most frames were coming in significantly less. Allegedly

(Certificate with mine said 754g, size M. Didn't weigh it before build 'cos I didn't want to have my heart broken if it was heavier! Kinda wish I had now.)

Photos are up hope you enjoy. Comments welcome as long as your nice
viewtopic.php?f=10&t=102977&p=899507#p899507" onclick="window.open(this.href);return false;

_________________
Wilier Zero.7 SR11 being built
2011 C59 Di2 AX SRT 24's, THM Calvica, Fibula
2010 RXR VIP @ Red RXR Sold
MY RXR VIP-> viewtopic.php?f=10&t=77056" onclick="window.open(this.href);return false;

So what did you decide SR 11 or EPS? EPS adds about 150g i think and adds a few £££!

_________________
Wiliers: Cento Uno; Cento SLR; Imperiale, Zero 7 (all Super Record 11sp naturally)

After some time with Di2 on my C59. 2 rides where I left the battery at home and a major wire failure that took days to fix. I missed the feel and the response of the "old" cables. I know it works " Better" for shifts, drop chains ect. But it took something away from the ride.

I can only say it is like driving a 911 Turbo S manual, and then going to a GTR with F1 shifting. Works better, shifts fast and smooth, but lacks a feel I can not put into better words. It was as if the soul was missing from the ride, the character was gone.

_________________
Wilier Zero.7 SR11 being built
2011 C59 Di2 AX SRT 24's, THM Calvica, Fibula
2010 RXR VIP @ Red RXR Sold
MY RXR VIP-> viewtopic.php?f=10&t=77056" onclick="window.open(this.href);return false;

mechanical SR 1875g EPS 2098g

_________________
Wiliers: Cento Uno; Cento SLR; Imperiale, Zero 7 (all Super Record 11sp naturally)

While I sincerely ask for your forgiveness of my bluntness, I do find the fact that 75% of your weights and conversions are signifcantly inaccurate and the fact that you mention a supercar every other sentence, a rather unusual breath of fresh air into this forum.

But most importantly, I find it difficult to imagine the build list giving you sub-10lbs. The A2J Rolo, which is as light or lighter in almost every department than the Wilier (Berk Combo, 640g frame, wheels, etc.), comes in at 10lbs 9 ounces according to Bikerumor.

http://www.bikerumor.com/2012/09/06/a2j ... -hardware/

Pls also note many comparable builds on the Wilier .7 come in around 12lbs or high 11s.

I-links or the new AICAN cables or a mixture of I link minis and the AICANs is an easy and cheapish 80-100g

_________________
http://fairwheelbikes.com/cycling-blog/ ... ee-z5.html