Back by popular demand, the general all-things Road forum!
Moderator: robbosmans
-
Stockie
- Posts: 354
- Joined: Mon Aug 20, 2007 7:24 pm
by Stockie on Mon Jul 09, 2012 12:40 pm
Hi,
Is there someone on the forum that has praxis rings installed on a first generation Sram Force crankset?
I've seen that the transition between the spider and the rings wouldn't be as smooth as it is with Shimano cranks, but that is on the second gen Sram cranks…
I Will make the leap
-
hmai18
- Posts: 628
- Joined: Mon May 15, 2006 12:19 am
- Location: Vancouver, BC, Canada.
by hmai18 on Mon Jul 09, 2012 6:23 pm
Having owned the 1st gen Force cranks with CT2 rings, I'm willing to bet that the transition will be similar on the 2nd gen cranks.
-
AptosBigRing
- in the industry
- Posts: 66
- Joined: Mon Apr 04, 2011 9:59 pm
- Location: Santa Cruz, CA
-
Contact:
by AptosBigRing on Mon Jul 09, 2012 11:11 pm
Hey guys... there are tons of photos in our Customer Pic album.
There are Rotor cranks and SRAM also so you can visually see.
Album - https://www.facebook.com/media/set/?set=a.210246239045236.47374.137176093018918&type=3
We started this album specifically so customers could show off their setups for others to see. Hope this helps.
Adam @ Praxis
-
Ozrider
- Posts: 1018
- Joined: Sat Nov 20, 2010 6:06 am
- Location: Perth, Western Australia
by Ozrider on Tue Jul 10, 2012 1:01 am
The Praxis rings are stiffer and definitely improve shifting. There is a thread with feedback.
Ozrider - Western Australia
Parlee Z5 XL (6055g/13.32lbs) Trek Madone 5.9 (7052-7500g)Jonesman Columbus Spirit (8680g)
Chase your dreams - it's only impossible until it's done
