Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Tue Jul 26, 2016 1:33 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 39 posts ]  Go to page Previous 1 2 3
Author Message
PostPosted: Mon Jul 09, 2012 8:31 am 
Offline

Joined: Mon Jan 24, 2005 9:41 pm
Posts: 760
Location: Uppsala, Sweden
Omiar wrote:
Seems that your frame doesn't have a hole, there are just those "ribs" to guide the mechanical shifting cables. So you must remove to bottom bracket cup from one side to put the junction box inside the frame.
You still need to get the battery and FD wires from to the junction box to the components - the easiest way i can think of is drilling the same "ribs", so that the path follows the wires logical route. I will try to snap a picture from my frame.


or drill o hole in the top of the seat post and have the battery under the saddle


Top
   
PostPosted: Mon Jul 09, 2012 8:41 am 
Offline

Joined: Sun Mar 11, 2012 1:40 am
Posts: 268
JensW
How that solves the placing of the B junction? If I stay external, the box I have is not good. I can move the battery let say on the seat tube, can you explain what am I solving by that?

If you mean to use the internal B junction and to follow what Omiar said so the box will seat inside the frame and the battery wire will run up inside the seat tube but then where and how I hold the battery there, what do you mean under the saddle.
Thanks


Top
   
PostPosted: Sat Jul 14, 2012 11:35 pm 
Offline

Joined: Sun Mar 11, 2012 1:40 am
Posts: 268
Finally my LBS got me what I wanted, they width a bit the internal housing The frame has, they did a great job and everything runs internally, neat and clean. I'll post some pictures soon!


Top
   
PostPosted: Sun Jul 15, 2012 10:23 am 
Offline

Joined: Mon Jan 24, 2005 9:41 pm
Posts: 760
Location: Uppsala, Sweden
WasFab wrote:
JensW
How that solves the placing of the B junction? If I stay external, the box I have is not good. I can move the battery let say on the seat tube, can you explain what am I solving by that?

If you mean to use the internal B junction and to follow what Omiar said so the box will seat inside the frame and the battery wire will run up inside the seat tube but then where and how I hold the battery there, what do you mean under the saddle.
Thanks


on the frame i had last year, i drilled i little hole in the top of the seatpost, so i could have the battery tucked in under the saddle, where you couldn´t se it if you didn´t search for it. i just straped it in with some Zip tie , of course, i had to cut the Zip ties every time you will charge the battery, but what is that, 1-2 times a year? :D


Top
   
PostPosted: Sun Jul 15, 2012 5:58 pm 
Offline

Joined: Sun Mar 11, 2012 1:40 am
Posts: 268
Here are the pictures after the job was done. Everything running inside. The housing holes were expended to take the wires in. The chain stay was drilled in the back of it for the RD wire, the existing hole of the FD in the BB area was widen a bit to take the wires of the FD and the battery.
Comments are welcome!

ImageImageImageImageImageImageImageImageImageImageImage


Last edited by WasFab on Tue Jul 17, 2012 10:51 pm, edited 2 times in total.

Top
   
PostPosted: Mon Jul 16, 2012 8:09 am 
Offline
User avatar

Joined: Thu Sep 21, 2006 8:57 pm
Posts: 4240
Location: Vicenza
Much better! :thumbup:


Top
   
PostPosted: Mon Jul 16, 2012 8:20 pm 
Offline

Joined: Wed Dec 14, 2011 8:20 pm
Posts: 214
Good 4 you.
Did they drill a new hole in the chainstay?

_________________
Scott Foil Ultegra Di2
Scott Scale 35 26"
Scott Spark LTD 29" M8000


Top
   
PostPosted: Mon Jul 16, 2012 10:59 pm 
Offline

Joined: Sun Mar 11, 2012 1:40 am
Posts: 268
Omiar

Yes I'm not sure why they didn't expend the existing hole on the side of the chain stay. Could it be not to weaken the chain stay area if they drill the side, as I read few things about it but I'm not sure.


Top
   
PostPosted: Wed Apr 10, 2013 12:49 am 
Offline

Joined: Mon Dec 05, 2011 9:02 am
Posts: 18
WasFab wrote:
Here are the pictures after the job was done. Everything running inside. The housing holes were expended to take the wires in. The chain stay was drilled in the back of it for the RD wire, the existing hole of the FD in the BB area was widen a bit to take the wires of the FD and the battery.
Comments are welcome!

ImageImageImageImageImageImageImageImageImageImageImage


Now all you need to do ts put the battery in the seat post, buy this kit on eBay (http://www.ebay.com/itm/290894530756?ss ... 1555.l2649), than Update the firmware in the other components and you can have MULTI-SHIFTING NOW SUPPORTED WITH ULTEGRA.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 39 posts ]  Go to page Previous 1 2 3

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Handlebar with internal cable routing and DI2

in Road

muntos

5

696

Sun Nov 15, 2015 3:28 am

mimason View the latest post

There are no new unread posts for this topic. Internal / External Cable routing

in Road

briantumma

7

647

Fri Jan 15, 2016 12:17 pm

briantumma View the latest post

There are no new unread posts for this topic. Full internal handlebar/stem routing

in Road

aerodynamiq

1

695

Sun Nov 22, 2015 7:50 am

AJS914 View the latest post

There are no new unread posts for this topic. Zipp sl70 aero internal cable routing help

in Road

A2ON

12

470

Fri Jul 22, 2016 8:38 am

A2ON View the latest post

There are no new unread posts for this topic. poorly designed internal brake cable routing

in Road

Foghat

7

676

Sun May 08, 2016 12:09 pm

lone wheeler View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], dddavid, Google [Bot], trex021 and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited