HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Articles FAQ Contact About




Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Thu Jun 21, 2012 6:29 am 
Offline

Joined: Thu Jun 21, 2012 6:06 am
Posts: 3
Hello, new here and looking for informed opinions.

Here is the jist of it...

2009 Defy Advanced 2 with a 1 1/8 top tube tapers to a 1 1/4 bottom.

Frame was replaced under warranty and the carbon/alloy steerer no longer match the rest of the bike at all and is rather hideous IMO. Unfortunatey or fortunately depending on what side of the matter you rest, we are in the world of Giant OverDrive 2 where 1 1/4 tops taper to 1 1/2.

What would you do? Pros/Cons

Option one:
Replace fork with full carbon 1 1/8 straight fork- I have chosen the Ritchey Pro Carbon and find some solution for the gap at the bottom of the tube...which I am not sure of yet. Potential steering precision and stiffness compromise, not to mention who knows what else...

Option two:
Convert the headset, bottom and stem to the newer Giant Overdrive 2 system which is reverse compatible but expensive and I would have to purchase a 2012 Defy Advanced 2 full composite fork and all the needed hardware which would be pricey to say the least.

Both options would solve the appearance problem and give me a full composite fork and steerer. Option one is on the surface the most financially desirable but I am not sure how to proceed or what course of action would be best negating as many potential performance downsides as possible.

Option two seems it could carry the potential of real measurable performance improvement based on Giant's claims of 30% increased stiffness ect.

Your opinions and suggestions are greatly appreciated.


Top
 Profile  
 
PostPosted: Thu Jun 21, 2012 6:41 am 
Offline

Joined: Tue Dec 30, 2008 3:38 pm
Posts: 105
Location: Philippines
Can your LBS also replace your fork as well or even just a discounted replacement policy? Option 1 (if you do get to figure things out) might negate warranties of the frame and fork, while option 2 is expensive indeed.


Top
 Profile  
 
Posted: Thu Jun 21, 2012 6:41 am 


Top
  
 
PostPosted: Thu Jun 21, 2012 6:49 am 
Offline

Joined: Thu Jun 21, 2012 6:06 am
Posts: 3
Unfortunately, the only forks available are the newer ones from Giant and my LBS says option 2 would be how to proceed, but they are currently toying with the idea of how to make the 1 1/8 Ritchey work with my tapered tube at the bottom as there is significantly less replacement of parts and cost involved, that is of course if there is a option that is not too great a performance compromise. I am thinking of calling Cane Creek or Ritchey in the morning and asking opinions as well. I really want to get this stuff wrapped up.


Top
 Profile  
 
PostPosted: Thu Jun 21, 2012 7:18 am 
Offline

Joined: Sat May 22, 2010 2:42 pm
Posts: 57
Location: Wiltshire, UK
What good is a warranty replacement frame if you are unable to use it? Why should you be expected to have to buy a new fork to enable you to ride the bike again?

I've been pretty impressed with Giant warranty claims in the past so am slightly suprised by this. Who ever sent out the frame might not have actually realised the problem.

I would go for option 2, but insist that the LBS push this back up to Giant as a continuation of the original claim.


Top
 Profile  
 
PostPosted: Thu Jun 21, 2012 8:03 am 
Offline
Formerly known as CAADHEAD
User avatar

Joined: Sun Dec 21, 2003 8:32 pm
Posts: 1423
Location: WALES,UK
Giant should definitely sort you out with a fork but it is possible to convert a standard 1 1/8 fork to fit using a shim to enable fitment of the 1 1/4 crown race onto the 1 1/8 fork crown, I've done it with great results.

_________________
Ti or dye!

The Weenie formally known as CAADHEAD


Top
 Profile  
 
PostPosted: Thu Jun 21, 2012 10:59 am 
Offline

Joined: Fri Jun 06, 2008 11:41 am
Posts: 201
Location: Bucks County PA USA
Agree with poster who says that Giant should warranty frame/fork as a unit in this situation. if not, how about simple repaint of fork to cosmetically acceptable color ? - should be relatively inexpensive.


Top
 Profile  
 
PostPosted: Fri Jun 22, 2012 12:54 am 
Offline

Joined: Sun Mar 23, 2008 7:31 pm
Posts: 345
I wouldn't do any of this fiddly stuff until I was absolutely sure that Giant wouldn't do the right thing and make you whole (which they aren't at this point). I'd be escalating from friendly negotiation to anger and treats, as needed, until I was satisfied.

One option I don't think I saw mentioned is to simply have the old fork painted to match the new frame. To me, if Giant paid for that, it would make you whole, and then you could decide if that's good enough for you or if you want to pay (yourself) for one of the make-do workarounds you've listed. I'd bet any autobody shop could make the old fork look very nice with the new frame especially if they had a photo of the correct matching color pattern. They can match the paint on the new frame using thier computerized optical analysis stuff.


Top
 Profile  
 
PostPosted: Fri Jun 22, 2012 1:22 am 
Offline

Joined: Thu Jun 21, 2012 6:06 am
Posts: 3
Thanks everyone for the replies and advice.

Apparently FSA has a very simple solution for less than $15 that they claim works flawlessly and will have no noticeable problems if installed properly. They spent a surprisingly long time explaining to me why this part was designed and that I most certainly am not the first serious recreational cyclist to make these modifications with positive results. To them it is not some random risky hack/ducktape modification.

Giant is saying they no longer stock forks that fit my bike and that the fork is not covered under warranty just because the frame happens to have been replaced. Despite this they would replace it simply on customer satisfaction, but have no fitting replacements in a compatible color scheme at this time.

Finally I really do want a full composite fork at this point (which is why simply painting the fork leaves me like... meh) and think I will try the FSA route as I also have a Ritchey Carbon stem and Carbon bar already installed so the fork does complement the overall color scheme of the bike and other components installed.

Unfortunately I am afraid it just took me too long to build up enough frustration and sense of entitlement to challenge the situation. Had I done this a year earlier, when they replaced the frame, I am sure it would have been simpler or there would have been a better chance.

Thanks for the feedback. Live and learn...


Top
 Profile  
 
PostPosted: Fri Jun 22, 2012 1:33 am 
Offline

Joined: Fri Mar 18, 2005 4:12 pm
Posts: 2306
Location: eh?
I think the LBS goofed originally.

I had a TCR Advance with a mere paint crack in the head tube that was replaced fork and all by Giant no questions asked. Giant does this routinely.

Frames and forks are a system, whether it be mechanical or aesthetic. They should always be replaced together.

Sorry for your hassle.

_________________
swinter wrote:
Mr.Gib got it right


Top
 Profile  
 
Posted: Fri Jun 22, 2012 1:33 am 


Top
  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 


Who is online

Users browsing this forum: alexalecu, cage and 60 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
This topic is locked, you cannot edit posts or make further replies. Advice Needed: Which Carbon Wheels?

in Road

CyclingWales888

2

771

Wed Aug 14, 2013 5:21 pm

Powerful Pete View the latest post

There are no new unread posts for this topic. Geometry advice needed on a prototype Merckx frame

in Road

SWijland

14

699

Wed Jan 22, 2014 9:44 pm

legs 11 View the latest post

There are no new unread posts for this topic. Cannondale Dilemma

in Road

rheosibal

14

1562

Tue Jan 21, 2014 3:35 am

shimmeD View the latest post

There are no new unread posts for this topic. Brake dilemma. Suggestions?

in Road

dgasmd

14

898

Wed Feb 19, 2014 8:10 pm

barsook77 View the latest post

There are no new unread posts for this topic. Campy build dilemma

[ Go to page: 1, 2 ]

in Road

RippedUp

18

1163

Thu Jul 03, 2014 3:05 am

Stats View the latest post


It is currently Fri Aug 01, 2014 7:42 am

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB