Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sun May 01, 2016 11:05 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062

All times are UTC+01:00

Post new topic  Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Campagnolo Chainrings
PostPosted: Tue Jun 19, 2012 3:19 am 

Joined: Thu May 31, 2012 3:11 am
Posts: 6
I currently have a Chorus 50/34 Compact. The crank is a chorus CT Ultra Torque crank. I was wondering what kind of chainrings I would need to make it a standard 53/39 crankset? Are there any compatibility issues with these chainrings?
Thanks for any help!

PostPosted: Tue Jun 19, 2012 5:23 am 

Joined: Tue Feb 14, 2006 4:42 am
Posts: 934
Location: Calgary
It's probably easier to just swap out the crank and sell your compact. There's lots of demand for compacts so it should move fairly easily. I checked a couple of on line sites and didn't see 53 or 39 toth rings for Campy compact. Check your derailleur too. If it's a special compact one, it might not work very well with the regular rings.

PostPosted: Tue Jun 19, 2012 7:47 am 

Joined: Wed Feb 22, 2012 3:16 pm
Posts: 35
I think TA-specialties, Stronglight or Miche will have chainrings, which ones fit may vary with the year of manufacture of your cranks.
Some options, depending on your cranks. I have only used TA-Specialties on Shimano cranks but that worked fine. As C50jim said it may be a better choice to sell your compacts and buy a 53/39 if you aresure that is what you want.
http://www.bike24.com/1.php?content=8;n ... gc=122:435
http://www.bike24.com/1.php?content=8;n ... gc=122:435
http://www.starbike.com/p/Specialites-T ... CT-3671-en
http://www.starbike.com/p/Specialites-T ... CT-2996-en

PostPosted: Tue Jun 19, 2012 12:10 pm 

Joined: Thu Apr 12, 2012 4:33 am
Posts: 220
Dont think it's possible to put 11 speed Campy rings in that configuration onto a compact.

PostPosted: Tue Jun 19, 2012 12:48 pm 

Joined: Sun Jun 17, 2012 3:15 pm
Posts: 183
I read somewhere that Campy will be offering semi compact 52/36 rings with a 110 BCD at some point. Miche already do so they might also fit, as mentioned above. They might flex a bit though.

PostPosted: Tue Jun 19, 2012 8:20 pm 

Joined: Wed Aug 31, 2011 2:36 am
Posts: 199
Just buy some TA Specialites Nerius 11 chainrings:

They have both a 39T inner and 53T outer in the compact 110mm bolt pattern. But you're probably going to also need these if you have a 2011/2012 Chorus crankset that has a threaded inner ring rather than separate chainring nuts:

Lots of good information about using aftermarket chainrings with the 2011/2012 threaded inner chainring in this thread (jump straight to page 3 for the conclusion):

Time VXRS Ulteam (7.16 kg)

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

All times are UTC+01:00

Who is online

Users browsing this forum: Baidu [Spider], CanadianBiker, eric01, Exabot [Bot], Google Adsense [Bot], keith, Martin.F, mrgray and 29 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited